Revision ed7f5cb823e88f9d91c4cad58fbb77f35dcbc52c authored by Eric Anholt on 14 September 2016, 18:21:29 UTC, committed by popcornmix on 08 January 2017, 11:41:56 UTC
On Pi0/1/2, we use an external GPIO line for hotplug detection, since the HDMI_HOTPLUG register isn't connected to anything. However, with the Pi3 the HPD GPIO line has moved off to a GPIO expander that will be tricky to get to (the firmware is constantly polling the expander using i2c0, so we'll need to coordinate with it). As a stop-gap, if we don't have a GPIO line, use an EDID probe to detect connection. Fixes HDMI display on the pi3. Signed-off-by: Eric Anholt <eric@anholt.net>
1 parent 6a63898
| File | Mode | Size |
|---|---|---|
| Documentation | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .cocciconfig | -rw-r--r-- | 59 bytes |
| .get_maintainer.ignore | -rw-r--r-- | 31 bytes |
| .gitignore | -rw-r--r-- | 1.3 KB |
| .mailmap | -rw-r--r-- | 7.3 KB |
| COPYING | -rw-r--r-- | 18.3 KB |
| CREDITS | -rw-r--r-- | 95.5 KB |
| Kbuild | -rw-r--r-- | 2.8 KB |
| Kconfig | -rw-r--r-- | 252 bytes |
| MAINTAINERS | -rw-r--r-- | 363.9 KB |
| Makefile | -rw-r--r-- | 56.9 KB |
| README | -rw-r--r-- | 18.1 KB |
| REPORTING-BUGS | -rw-r--r-- | 7.3 KB |
Computing file changes ...
