| ef35be7 | Takashi Iwai | 19 October 2006, 15:38:31 UTC | [ALSA] Fix addition of user-defined boolean controls Fixed the addition of user-defined boolean controls, the private data size is corrected to be handled properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:15 UTC |
| da43deb | Takashi Iwai | 19 October 2006, 13:20:08 UTC | [ALSA] Fix AC97 power-saving mode Fix the bug in AC97 power-saving mode that the power isn't turned on when power_save is set to 1 via sysfs during the power off state. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:14 UTC |
| dbedca3 | Takashi Iwai | 18 October 2006, 17:09:46 UTC | [ALSA] Fix re-use of va_list The va_list is designed to be used only once. The current code may pass va_list arguments multiple times and may cause Oops. Copy/release the arguments temporarily to avoid this problem. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:13 UTC |
| 5b15c95 | Felix Kuehling | 16 October 2006, 10:49:47 UTC | [ALSA] hda_intel: add ATI RS690 HDMI audio support This patch adds support for the HDMI codec of the ATI RS690 IGP northbridge. Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:12 UTC |
| 264e6e3 | Takashi Iwai | 13 October 2006, 10:40:51 UTC | [ALSA] hda-codec - Add model entry for ASUS U5F laptop Added a model entry for ASUS U5F laptop with AD1986A codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:11 UTC |
| c994945 | Takashi Iwai | 12 October 2006, 19:10:21 UTC | [ALSA] Fix dependency of snd-adlib driver in Kconfig Added the missing dependency on CONFIG_SND for snd-adlib driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:10 UTC |
| 30b3539 | Takashi Iwai | 11 October 2006, 16:52:53 UTC | [ALSA] Various fixes for suspend/resume of ALSA PCI drivers - Check the return value of pci_enable_device() and request_irq() in the suspend. If any error occurs there, disable the device using snd_card_disconnect(). - Call pci_set_power_state() properly with pci_choose_state(). - Fix the order to call pci_set_power_state(). - Removed obsolete house-made PM codes in some drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:10 UTC |
| c06134d | Takashi Iwai | 11 October 2006, 16:49:13 UTC | [ALSA] hda-codec - Fix assignment of PCM devices for Realtek codecs Fixed the assignment of PCM devices for Realtek codecs. The secondary analog capture should be statically asigned to the third device regardless whether SPDIF exists or not. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:08 UTC |
| 5019f75 | Amit Choudhary | 09 October 2006, 14:04:34 UTC | [ALSA] sound/isa/opti9xx/opti92x-ad1848.c: check kmalloc() return value Check the return value of kmalloc() in function snd_card_opti9xx_pnp(), in file sound/isa/opti9xx/opti92x-ad1848.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:07 UTC |
| b1e8a79 | Amit Choudhary | 09 October 2006, 14:03:52 UTC | [ALSA] sound/isa/ad1816a/ad1816a.c: check kmalloc() return value Check the return value of kmalloc() in function snd_card_ad1816a_pnp(), in file sound/isa/ad1816a/ad1816a.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:06 UTC |
| fbdbb22 | Amit Choudhary | 09 October 2006, 14:03:23 UTC | [ALSA] sound/isa/cmi8330.c: check kmalloc() return value Check the return value of kmalloc() in function snd_cmi8330_pnp(), in file sound/isa/cmi8330.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:05 UTC |
| 4a81a21 | Amit Choudhary | 09 October 2006, 14:02:49 UTC | [ALSA] sound/isa/gus/interwave.c: check kmalloc() return value Check the return value of kmalloc() in function snd_interwave_pnp(), in file sound/isa/gus/interwave.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 22 October 2006, 08:51:02 UTC |
| 5cfc35c | Linus Torvalds | 21 October 2006, 23:52:40 UTC | Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6 * 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: increase PHB1 split transaction timeout [PATCH] x86-64: Fix C3 timer test | 21 October 2006, 23:52:40 UTC |
| cb01fc7 | Muli Ben-Yehuda | 21 October 2006, 22:41:15 UTC | [PATCH] x86-64: increase PHB1 split transaction timeout This patch increases the timeout for PCI split transactions on PHB1 on the first Calgary to work around an issue with the aic94xx adapter. Fixes kernel.org bugzilla #7180 (http://bugzilla.kernel.org/show_bug.cgi?id=7180) Based on excellent debugging and a patch by Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Darrick J. Wong <djwong@us.ibm.com> | 21 October 2006, 22:41:15 UTC |
| aa026ed | Andi Kleen | 21 October 2006, 22:41:15 UTC | [PATCH] x86-64: Fix C3 timer test There was a typo in the C3 latency test to decide of the TSC should be used or not. It used the C2 latency threshold, not the C3 one. Fix that. This should fix the time on various dual core laptops. Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 22:41:15 UTC |
| f8829ca | Ralf Baechle | 21 October 2006, 22:17:35 UTC | [MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page The current implementation uses a sequence of a cacheflush and a copy. This is racy in case of a multithreaded debuggee and renders GDB virtually unusable. Aside this fixes a performance hog rendering access to /proc/cmdline very slow and resulting in a enough cache stalls for the 34K AP/SP programming model to make the bare metal code on the non-Linux VPE miss RT deadlines. The main part of this patch was originally written by Ralf Baechle; Atushi Nemoto did the the debugging. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 21 October 2006, 22:17:35 UTC |
| 224dc50 | Ralf Baechle | 21 October 2006, 01:05:20 UTC | [MIPS] Cleanup remaining references to mips_counter_frequency. Noticed by Samium Gromoff but his patch got stale in flight ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 21 October 2006, 22:17:35 UTC |
| cb7fabc | Linus Torvalds | 21 October 2006, 20:41:41 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata-sff: Allow for wacky systems [PATCH] ahci: readability tweak [PATCH] libata: typo fix [PATCH] ATA must depend on BLOCK [PATCH] libata: use correct map_db values for ICH8 | 21 October 2006, 20:41:41 UTC |
| dcf234f | Linus Torvalds | 21 October 2006, 20:40:29 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (22 commits) [PATCH] ibmveth: Fix index increment calculation [PATCH] Fix timer race [PATCH] Remove useless comment from sb1250 [PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes and bugfixes [PATCH] sky2: 88E803X transmit lockup [PATCH] e1000: Reset all functions after a PCI error [PATCH] WAN/pc300: handle, propagate minor errors [PATCH] Update smc91x driver with ARM Versatile board info [PATCH] wireless: WE-20 compatibility for ESSID and NICKN ioctls [PATCH] zd1211rw: fix build-break caused by association race fix [PATCH] sotftmac: fix a slab corruption in WEP restricted key association [PATCH] airo: check if need to freeze [PATCH] wireless: More WE-21 potential overflows... [PATCH] zd1201: Possible NULL dereference [PATCH] orinoco: fix WE-21 buffer overflow [PATCH] airo.c: check returned values [PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAM [PATCH] bcm43xx-softmac: check returned value from pci_enable_device [PATCH] softmac: Fix WX and association related races [PATCH] bcm43xx: fix race condition in periodic work handler ... | 21 October 2006, 20:40:29 UTC |
| 946b924 | Linus Torvalds | 21 October 2006, 20:39:44 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart * master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] uninorth: Add module param 'aperture' for aperture size | 21 October 2006, 20:39:44 UTC |
| 5d6aaf3 | Linus Torvalds | 21 October 2006, 20:36:46 UTC | Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6 * 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state [PATCH] x86-64: Overlapping program headers in physical addr space fix [PATCH] x86-64: Put more than one cpu in TARGET_CPUS [PATCH] x86: Revert new unwind kernel stack termination [PATCH] x86-64: Use irq_domain in ioapic_retrigger_irq [PATCH] i386: Disable nmi watchdog on all ThinkPads [PATCH] x86-64: Revert interrupt backlink changes [PATCH] x86-64: Fix ENOSYS in system call tracing [PATCH] i386: Fix fake return address [PATCH] x86-64: x86_64 add NX mask for PTE entry [PATCH] x86-64: Speed up dwarf2 unwinder [PATCH] x86: Use -maccumulate-outgoing-args [PATCH] x86-64: fix page align in e820 allocator [PATCH] x86-64: Fix for arch/x86_64/pci/Makefile CFLAGS [PATCH] i386: fix .cfi_signal_frame copy-n-paste error [PATCH] x86-64: typo in __assign_irq_vector when updating pos for vector and offset [PATCH] x86-64: x86_64 hot-add memory srat.c fix [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig | 21 October 2006, 20:36:46 UTC |
| fc22617 | Trond Myklebust | 21 October 2006, 17:24:24 UTC | [PATCH] NFS: Cache invalidation fixup If someone has renamed a directory on the server, triggering the d_move code in d_materialise_unique(), then we need to invalidate the cached directory information in the source parent directory. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| 9eaef27 | Trond Myklebust | 21 October 2006, 17:24:20 UTC | [PATCH] VFS: Make d_materialise_unique() enforce directory uniqueness If the caller tries to instantiate a directory using an inode that already has a dentry alias, then we attempt to rename the existing dentry instead of instantiating a new one. Fail with an ELOOP error if the rename would affect one of our parent directories. This behaviour is needed in order to avoid issues such as http://bugzilla.kernel.org/show_bug.cgi?id=7178 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| 3f7705e | Matthew Wilcox | 21 October 2006, 17:24:19 UTC | [PATCH] cciss: Fix warnings (and bug on 1TB discs) CCISS was producing warnings about shifts being greater than the size of the type and pointers being of incompatible type. Turns out this is because it's calling do_div on a 32-bit quantity. Upon further investigation, the sector_t total_size is being assigned to an int, and then we're calling do_div on that int. Obviously, sector_div is called for here, and I took the chance to refactor the code a little. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| 8a7822a | Alexey Dobriyan | 21 October 2006, 17:24:17 UTC | [PATCH] i2o/exec-osm.c: use "unsigned long flags;" Just like everyone else. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| faf6bbc | Paul Jackson | 21 October 2006, 17:24:17 UTC | [PATCH] cpuset: mempolicy migration typo fix Mistyped an ifdef CONFIG_CPUSETS - fixed. I doubt that anyone ever noticed. The impact of this typo was that if someone: 1) was using MPOL_BIND to force off node allocations 2) while using cpusets to constrain memory placement 3) when that cpuset was migrating that jobs memory 4) while the tasks in that job were actively forking then there was a rare chance that future allocations using that MPOL_BIND policy would be node local, not off node. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| aedb0eb | Christoph Lameter | 21 October 2006, 17:24:16 UTC | [PATCH] Slab: Do not fallback to nodes that have not been bootstrapped yet The zonelist may contain zones of nodes that have not been bootstrapped and we will oops if we try to allocate from those zones. So check if the node information for the slab and the node have been setup before attempting an allocation. If it has not been setup then skip that zone. Usually we will not encounter this situation since the slab bootstrap code avoids falling back before we have setup the respective nodes but we seem to have a special needs for pppc. Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| 7516795 | Andy Whitcroft | 21 October 2006, 17:24:14 UTC | [PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpc Reintroduce NODES_SPAN_OTHER_NODES for powerpc Revert "[PATCH] Remove SPAN_OTHER_NODES config definition" This reverts commit f62859bb6871c5e4a8e591c60befc8caaf54db8c. Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES" This reverts commit a94b3ab7eab4edcc9b2cb474b188f774c331adf7. Also update the comments to indicate that this is still required and where its used. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| 047a66d | David Gibson | 21 October 2006, 17:24:13 UTC | [PATCH] ibmveth: Fix index increment calculation The recent commit 751ae21c6cd1493e3d0a4935b08fb298b9d89773 introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: David Gibson <dwg@au1.ibm.com> Acked-by: Santiago Leon <santil@us.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:06 UTC |
| d42552c | Andrew Morton | 21 October 2006, 17:24:12 UTC | [PATCH] pci: declare pci_get_device_reverse() We seem to have lost the declaration of pci_get_device_reverse(), if we ever had one. Add a CONFIG_PCI=0 stub too. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 78f3266 | Daniel Walker | 21 October 2006, 17:24:10 UTC | [PATCH] clocksource: acpi_pm: add another greylist chipset I have an acpi_pm that goes backwards, but it's not intel. I tested the verified read and my acpi_pm started to function properly. So I added it to the greylist. I'm assuming that's the right spot. I also added an unlikely() to the while, cause it seems appropriate. Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: John Stultz <johnstul@us.ibm.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 4f2e639 | NeilBrown | 21 October 2006, 17:24:09 UTC | [PATCH] md: endian annotations for the bitmap superblock And a couple of bug fixes found by sparse. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 1c05b4b | NeilBrown | 21 October 2006, 17:24:08 UTC | [PATCH] md: endian annotation for v1 superblock access Includes a couple of bugfixes found by sparse. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| da3ed32 | NeilBrown | 21 October 2006, 17:24:08 UTC | [PATCH] md: add another COMPAT_IOCTL for md .. so that you can use bitmaps with 32bit userspace on a 64 bit kernel. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 2e333e8 | NeilBrown | 21 October 2006, 17:24:07 UTC | [PATCH] md: fix calculation of ->degraded for multipath and raid10 Two less-used md personalities have bugs in the calculation of ->degraded (the extent to which the array is degraded). Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 3c5473f | Adrian Bunk | 21 October 2006, 17:24:06 UTC | [PATCH] drivers/ide/pci/generic.c: re-add the __setup("all-generic-ide",...) The change from __setup() to module_param_named() requires users to prefix the option with "generic.". This patch re-adds the __setup() additionally to the module_param_named(). Usually it would make sense getting rid of such an obsolete __setup() at some time, but considering that drivers/ide/ is slowly approaching a RIP status it's already implicitely scheduled for removal. This patch fixes kernel Bugzilla #7353. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 86fbf14 | Jiri Slaby | 21 October 2006, 17:24:01 UTC | [PATCH] Char: correct pci_get_device changes Commits 881a8c120acf7ec09c90289e2996b7c70f51e996 and efe1ec27837d6639eae82e1f5876910ba6433c3f corrects pci device matching in only one way; it no longer oopses/crashes, despite hotplug is not solved in these changes. Whenever pci_find_device -> pci_get_device change is performed, also pci_dev_get and pci_dev_put should be in most cases called to properly handle hotplug. This patch does exactly this thing -- increase refcount to let kernel know, that we are using this piece of HW just now. It affects moxa and rio char drivers. Cc: <R.E.Wolff@BitWizard.nl> Acked-by: Amit Gud <gud@eth.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 20:35:05 UTC |
| 8eb166b | Alan Cox | 16 October 2006, 15:24:50 UTC | [PATCH] libata-sff: Allow for wacky systems There are some Linux supported platforms that simply cannot hit the low I/O addresses used by ATA legacy mode PCI mappings. These platforms have a window for PCI space that is fixed by the board logic and doesn't include the neccessary locations. Provide a config option so that such platforms faced with a controller that they cannot support simply error it and punt Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 19:18:59 UTC |
| 12a87d3 | Alan Cox | 16 October 2006, 15:21:40 UTC | [PATCH] ahci: readability tweak Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 19:18:59 UTC |
| 3343571 | Tejun Heo | 19 October 2006, 05:44:53 UTC | [PATCH] libata: typo fix Typo fix in commment. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 19:18:59 UTC |
| bf2d401 | Adrian Bunk | 20 October 2006, 21:39:35 UTC | [PATCH] ATA must depend on BLOCK Fix the following compile error with CONFIG_ATA=y, CONFIG_BLOCK=n: ... CC drivers/ata/libata-scsi.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_dev_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:791: warning: implicit declaration of function ‘blk_queue_max_sectors’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘request_queue_t’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘q’ undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:800: warning: implicit declaration of function ‘blk_queue_max_hw_segments’ /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_slave_config’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:831: warning: implicit declaration of function ‘blk_queue_max_phys_segments’ make[3]: *** [drivers/ata/libata-scsi.o] Error 1 Bug report by Jesper Juhl. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 19:10:10 UTC |
| 158f30c | Kristen Carlson Accardi | 19 October 2006, 20:27:39 UTC | [PATCH] libata: use correct map_db values for ICH8 Use valid values for ICH8 map_db. With the old values, when the controller was in Native mode, and SCC was 1 (drives configured for IDE), any drive plugged into a slave port was not recognized. For Combined Mode (and SCC is still 1), 2 is a value value for MAP.map_value, and needs to be recognized. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 19:10:10 UTC |
| 5826cad | David Gibson | 13 October 2006, 04:20:59 UTC | [PATCH] ibmveth: Fix index increment calculation On Thu, Oct 12, 2006 at 06:22:14PM +1000, David Gibson wrote: > Your recent ibmveth commit, 751ae21c6cd1493e3d0a4935b08fb298b9d89773 > ("fix int rollover panic"), causes a rapid oops on my test machine > (POWER5 LPAR). > > I've bisected it down to that commit, but am still investigating the > cause of the crash itself. Found the problem, I believe: an object lesson in the need for great caution using ++. [...] @@ -213,6 +213,7 @@ static void ibmveth_replenish_buffer_poo } free_index = pool->consumer_index++ % pool->size; + pool->consumer_index = free_index; index = pool->free_map[free_index]; ibmveth_assert(index != IBM_VETH_INVALID_MAP); Since the ++ is used as post-increment, the increment is not included in free_index, and so the added line effectively reverts the increment. The produced_index side has an analagous bug. The following change corrects this: The recent commit 751ae21c6cd1493e3d0a4935b08fb298b9d89773 introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:34:21 UTC |
| cde49b0 | Jeff Garzik | 21 October 2006, 18:21:11 UTC | Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes | 21 October 2006, 18:21:11 UTC |
| cfadbd2 | Ralf Baechle | 18 October 2006, 01:15:37 UTC | [PATCH] Fix timer race When closing the driver or reinitializing the hardware there is the usual del_timer() race condition that exists when timers re-add themselves. Fix by conversion to del_timer_sync(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:20:02 UTC |
| 089fff2 | Dave Jones | 18 October 2006, 04:30:27 UTC | [PATCH] Remove useless comment from sb1250 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:20:01 UTC |
| 12cbbd9 | Jeff Garzik | 21 October 2006, 18:16:11 UTC | Merge tag 'jg-20061012-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp | 21 October 2006, 18:16:11 UTC |
| af60496 | Jeff Garzik | 21 October 2006, 18:11:15 UTC | Merge branch 'we21-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp | 21 October 2006, 18:11:15 UTC |
| 18a8e86 | Li Yang | 20 October 2006, 02:07:34 UTC | [PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes and bugfixes changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:09:51 UTC |
| 470ea7e | Stephen Hemminger | 21 October 2006, 00:06:11 UTC | [PATCH] sky2: 88E803X transmit lockup The reason sky2 driver was locking up on transmit on the Yukon-FE chipset is that it was misconfiguring the internal RAM buffer so the transmitter and receiver were sharing the same space. The code assumed there was 16K of RAM on Yukon-FE (taken from vendor driver sk98lin which is even more f*cked up on this). Then it assigned based on that. The giveaway was that the registers would only hold 9bits so both RX/TX had 0..1ff for space. It is a wonder it worked at all! This patch addresses this, and fixes an easily reproducible hang on Transmit. Only the Yukon-FE chip is Marvell 88E803X (10/100 only) are affected. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:08:24 UTC |
| 7347b03 | Linas Vepstas | 20 October 2006, 21:42:14 UTC | [PATCH] e1000: Reset all functions after a PCI error During the handling of the PCI error recovery sequence, the current e1000 driver erroneously blocks a device reset for any but the first PCI function. It shouldn't -- this is a cut-n-paste error from a different driver (which tolerated only one hardware reset per hardware card). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:08:24 UTC |
| 6f0f6d8 | Jeff Garzik | 20 October 2006, 21:43:15 UTC | [PATCH] WAN/pc300: handle, propagate minor errors - move definition of 'tmc' and 'br' locals closer to usage - handle clock_rate_calc() error - propagate errors back to upper level open routine Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:08:24 UTC |
| 718ecac | Deepak Saxena | 20 October 2006, 21:42:04 UTC | [PATCH] Update smc91x driver with ARM Versatile board info We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 21 October 2006, 18:08:24 UTC |
| 7b7fc70 | Linus Torvalds | 21 October 2006, 17:01:52 UTC | Merge branch 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block * 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Remove SUID when splicing into an inode [PATCH] Add lockless helpers for remove_suid() [PATCH] Introduce generic_file_splice_write_nolock() [PATCH] Take i_mutex in splice_from_pipe() | 21 October 2006, 17:01:52 UTC |
| e70ea8c | Andi Kleen | 21 October 2006, 16:37:03 UTC | [PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state By default route the 8254 over the 8259 and only disable it on ATI boards where this causes double timer interrupts. This should unbreak some Nvidia boards where the timer doesn't seem to tick of it isn't enabled in the 8259. At least one VIA board also seemed to have a little trouble with the disabled 8259. For 2.6.20 we'll try both dynamically without black listing, but I think for .19 this is the safer approach because it has been already well tested in earlier kernels. This also makes the x86-64 behaviour the same as i386. Command line options can change all this of course. Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:03 UTC |
| dbaab49 | Vivek Goyal | 21 October 2006, 16:37:03 UTC | [PATCH] x86-64: Overlapping program headers in physical addr space fix o A recent change to vmlinux.ld.S file broke kexec as now resulting vmlinux program headers are overlapping in physical address space. o Now all the vsyscall related sections are placed after data and after that mostly init data sections are placed. To avoid physical overlap among phdrs, there are three possible solutions. - Place vsyscall sections also in data phdrs instead of user - move vsyscal sections after init data in bss. - create another phdrs say data.init and move all the sections after vsyscall into this new phdr. o This patch implements the third solution. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Magnus Damm <magnus@valinux.co.jp> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> | 21 October 2006, 16:37:03 UTC |
| 84f404f | Eric W. Biederman | 21 October 2006, 16:37:02 UTC | [PATCH] x86-64: Put more than one cpu in TARGET_CPUS TARGET_CPUS is the default irq routing poicy. It specifies which cpus the kernel should aim an irq at. In physflat delivery mode we can route an irq to a single cpu. But that doesn't mean our default policy should only be a single cpu is allowed. By allowing the irq routing code to select from multiple cpus this enables systems with more irqs then we can service on a single processor to actually work. I just audited and tested the code and irqbalance doesn't care, and the io_apic.c doesn't care if we have extra cpus in the mask. Everything will use or assume we are using the lowest numbered cpu in the mask if we can't use them all. So this should result in no behavior changes except on systems that need it. Thanks for YH Lu for spotting this problem in his testing. Cc: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| 8cf2c51 | Andi Kleen | 21 October 2006, 16:37:02 UTC | [PATCH] x86: Revert new unwind kernel stack termination Jan convinced me that it was unnecessary because the assembly stubs do this already on the stack. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| 6bf2daf | Eric W. Biederman | 21 October 2006, 16:37:02 UTC | [PATCH] x86-64: Use irq_domain in ioapic_retrigger_irq Thanks to YH Lu for spotting this. It appears I missed this function when I refactored allocate_irq_vector and introduced irq_domain, with the result that all retriggered irqs would go to cpu 0 even if we were not prepared to receive them there. While reviewing YH's patch I also noticed that this function was missing locking, and since I am now reading two values from two diffrent arrays that looks like a race we might be able to hit in the real world. Cc: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| a1bae67 | Andi Kleen | 21 October 2006, 16:37:02 UTC | [PATCH] i386: Disable nmi watchdog on all ThinkPads Even newer Thinkpads have bugs in SMM code that causes hangs with NMI watchdog. Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| 581910e | Andi Kleen | 21 October 2006, 16:37:02 UTC | [PATCH] x86-64: Revert interrupt backlink changes They break more than they fix Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| cc7d479 | Jan Beulich | 21 October 2006, 16:37:02 UTC | [PATCH] x86-64: Fix ENOSYS in system call tracing This patch: - out of range system calls failing to return -ENOSYS under system call tracing [AK: split out from another patch by Jan as separate bugfix] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| 26fd5e0 | Jeremy Fitzhardinge | 21 October 2006, 16:37:02 UTC | [PATCH] i386: Fix fake return address The fake return address was being set to __KERNEL_PDA, rather than 0. Push it earlier while %eax still equals 0. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Andrew Morton <akpm@osdl.org> | 21 October 2006, 16:37:02 UTC |
| 7a71cef | bibo,mao | 21 October 2006, 16:37:02 UTC | [PATCH] x86-64: x86_64 add NX mask for PTE entry If function change_page_attr_addr calls revert_page to revert to original pte value, mk_pte_phys does not mask NX bit. If NX bit is set on no NX hardware supported x86_64 machine, there is will be RSVD type page fault and system will crash. This patch adds NX mask bit for PTE entry. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:02 UTC |
| 690a973 | Jan Beulich | 21 October 2006, 16:37:01 UTC | [PATCH] x86-64: Speed up dwarf2 unwinder This changes the dwarf2 unwinder to do a binary search for CIEs instead of a linear work. The linker is unfortunately not able to build a proper lookup table at link time, instead it creates one at runtime as soon as the bootmem allocator is usable (so you'll continue using the linear lookup for the first [hopefully] few calls). The code should be ready to utilize a build-time created table once a fixed linker becomes available. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| cdfce1f | Andi Kleen | 21 October 2006, 16:37:01 UTC | [PATCH] x86: Use -maccumulate-outgoing-args This avoids some problems with gcc 4.x and earlier generating invalid unwind information. In 4.1 the option is default when unwind information is enabled. And it seems to generate smaller code too, so it's probably a good thing on its own. With gcc 4.0: i386: 4683198 902112 480868 6066178 5c9002 vmlinux (before) 4449895 902112 480868 5832875 5900ab vmlinux (after) x86-64: 4939761 1449584 648216 7037561 6b6279 vmlinux (before) 4854193 1449584 648216 6951993 6a1439 vmlinux (after) On 4.1 it shouldn't make much difference because it is default when unwind is enabled anyways. Suggested by Michael Matz and Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| 73bb891 | Vivek Goyal | 21 October 2006, 16:37:01 UTC | [PATCH] x86-64: fix page align in e820 allocator Currently some code pieces assume that address returned by find_e820_area() are page aligned. But looks like find_e820_area() had no such intention and hence one might end up stomping over some of the data. One such case is bootmem allocator initialization code stomped over bss. This patch modified find_e820_area() to return page aligned address. This might be little wasteful of memory but at the same time probably it is easier to handle page aligned memory. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> | 21 October 2006, 16:37:01 UTC |
| 469b1d8 | Corey Minyard | 21 October 2006, 16:37:01 UTC | [PATCH] x86-64: Fix for arch/x86_64/pci/Makefile CFLAGS The arch/x86_64/pci directory was giving problems in a wierd cross-compile environment. The exact cause is unknown, but the Makefile used CFLAGS instead of EXTRA_CFLAGS. From what I can tell from Documentation/kbuild/makefiles.txt, CFLAGS should not be used for this, it should be EXTRA_CFLAGS. And it solves the cross-compile problem. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> | 21 October 2006, 16:37:01 UTC |
| da8604c | Andrew Morton | 21 October 2006, 16:37:01 UTC | [PATCH] i386: fix .cfi_signal_frame copy-n-paste error This was copied, pasted but not edited. Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| 45edfd1 | Yinghai Lu | 21 October 2006, 16:37:01 UTC | [PATCH] x86-64: typo in __assign_irq_vector when updating pos for vector and offset typo with cpu instead of new_cpu Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| 926fafe | keith mannthey | 21 October 2006, 16:37:01 UTC | [PATCH] x86-64: x86_64 hot-add memory srat.c fix This patch corrects the logic used in srat.c to figure out what parsing what action to take when registering hot-add areas. Hot-add areas should only be added to the node information for the MEMORY_HOTPLUG_RESERVE case. When booting MEMORY_HOTPLUG_SPARSE hot-add areas on everything but the last node are getting include in the node data and during kernel boot the pages are setup then the kernel dies when the pages are used. This patch fixes this issue. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| 13892de | Andi Kleen | 21 October 2006, 16:37:01 UTC | [PATCH] i386: Update defconfig Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:01 UTC |
| f248b6a | Andi Kleen | 21 October 2006, 16:37:00 UTC | [PATCH] x86-64: Update defconfig Signed-off-by: Andi Kleen <ak@suse.de> | 21 October 2006, 16:37:00 UTC |
| c7a3bd1 | Nicolas Pitre | 20 October 2006, 21:20:17 UTC | [PATCH] fix PXA2xx UDC compilation error This was apparently missed by the move to the generic IRQ code. Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 00:56:39 UTC |
| e17e31e | Olaf Hering | 20 October 2006, 07:23:05 UTC | [PATCH] Fix up rpaphp driver for pci hotplug header move Use grep instead of make during interface changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 21 October 2006, 00:56:39 UTC |
| 559c9ac | Chandra Seetharaman | 10 October 2006, 22:15:55 UTC | configfs: handle kzalloc() failure in check_perm() check_perm() does not drop the reference to the module when kzalloc() failure occurs. Signed-Off-By: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> | 20 October 2006, 22:29:00 UTC |
| e2057c5 | Mark Fasheh | 04 October 2006, 00:53:05 UTC | ocfs2: cond_resched() in ocfs2_zero_extend() The loop within ocfs2_zero_extend() can execute for a long time, causing spurious soft lockup warnings. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> | 20 October 2006, 22:27:48 UTC |
| 0effef7 | Mark Fasheh | 04 October 2006, 00:44:42 UTC | ocfs2: fix page zeroing during simple extends The page zeroing code was missing the region between old i_size and new i_size for those extends that didn't actually require a change in space allocation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> | 20 October 2006, 22:27:26 UTC |
| 711a40f | Sunil Mushran | 11 October 2006, 19:23:02 UTC | ocfs2: remove spurious d_count check in ocfs2_rename() This was causing some folks to incorrectly get -EBUSY during rename. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> | 20 October 2006, 22:26:35 UTC |
| 79cd22d | Akinobu Mita | 12 October 2006, 05:29:33 UTC | ocfs2: delete redundant memcmp() This patch deletes redundant memcmp() while looking up in rb tree. Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> | 20 October 2006, 22:26:06 UTC |
| f1877fb | Linus Torvalds | 20 October 2006, 17:44:52 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix iounmap argument to const volatile. [MIPS] Reserve syscall numbers for kexec_load. [MIPS] Update tb0287_defconfig [MIPS] Update pnx8550-v2pci_defconfig [MIPS] Update pnx8500-jbs_defconfig [MIPS] More vr41xx pt_regs fixups [MIPS] save_context_stack fix [MIPS] Use compat_sys_mount. [MIPS] Fix O32 personality(2) call with 0xffffffff argument. [MIPS] A few more pt_regs fixups. [MIPS] Malta: Fix uninitialized regs pointer. [MIPS] Delete unneeded pt_regs forward declaration. [MIPS] Use kallsyms_lookup_size_offset() instead of kallsyms_lookup() | 20 October 2006, 17:44:52 UTC |
| b2ef785 | Linus Torvalds | 20 October 2006, 17:40:48 UTC | Revert "[mv643xx] Add pci device table for auto module loading." This reverts commit 4596c75c23dde2623cbeec69357d5eb13d28387e as requested by Olaf Hering. It causes compile errors, and says Olaf: "This change is also wrong, the autoloading works perfect with 2.6.18, no need to add random PCI ids. See commit a0245f7ad5214cb00131d7cd176446e067c913dc, platform devices have now a modalias entry in sysfs. The network card is not a PCI device." Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:40:48 UTC |
| 7c2aed4 | Linus Torvalds | 20 October 2006, 17:28:48 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] api: Select cryptomgr where needed [CRYPTO] api: fix crypto_alloc_base() return value | 20 October 2006, 17:28:48 UTC |
| adfefb5 | Linus Torvalds | 20 October 2006, 17:28:14 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] gfs2_dir_read_data(): fix uninitialized variable usage [GFS2] fs/gfs2/ops_fstype.c:fill_super_meta(): fix NULL dereference [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): don't use an uninitialized variable [GFS2] fs/gfs2/ops_fstype.c:gfs2_get_sb_meta(): remove unused variable [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): remove dead code [GFS2] gfs2 endianness bug: be16 assigned to be32 field [GFS2] Fix bmap to map extents properly [DLM] fix iovec length in recvmsg | 20 October 2006, 17:28:14 UTC |
| d2c5f06 | Linus Torvalds | 20 October 2006, 17:27:55 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Clean up asm-sparc/elf.h pollution in userspace. [SPARC64]: Fix of_ioremap(). [SPARC64]: Compute dma_end argument to sabre_pbm_init() correctly. | 20 October 2006, 17:27:55 UTC |
| c144879 | Linus Torvalds | 20 October 2006, 17:27:38 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits) [Bluetooth] Fix HID disconnect NULL pointer dereference [Bluetooth] Add missing entry for Nokia DTL-4 PCMCIA card [Bluetooth] Add support for newer ANYCOM USB dongles [NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver. [IPV4] inet_peer: Group together avl_left, avl_right, v4daddr to speedup lookups on some CPUS [TCP]: One NET_INC_STATS() could be NET_INC_STATS_BH in tcp_v4_err() [NETFILTER]: Missing check for CAP_NET_ADMIN in iptables compat layer [NETPOLL]: initialize skb for UDP [IPV6]: Fix route.c warnings when multiple tables are disabled. [TG3]: Bump driver version and release date. [TG3]: Add lower bound checks for tx ring size. [TG3]: Fix set ring params tx ring size implementation [NET]: reduce per cpu ram used for loopback stats [IPv6] route: Fix prohibit and blackhole routing decision [DECNET]: Fix input routing bug [TCP]: Bound TSO defer time [IPv4] fib: Remove unused fib_config members [IPV6]: Always copy rt->u.dst.error when copying a rt6_info. [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES. [IPV6]: Clean up BACKTRACK(). ... | 20 October 2006, 17:27:38 UTC |
| ac4e0ab | Adrian Bunk | 20 October 2006, 06:29:14 UTC | [PATCH] one more ARM IRQ fix Fix one more compile breakage caused by the post -rc1 IRQ changes. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| 1a04706 | NeilBrown | 20 October 2006, 06:29:13 UTC | [PATCH] knfsd: fix race that can disable NFS server This patch is suitable for just about any 2.6 kernel. It should go in 2.6.19 and 2.6.18.2 and possible even the .17 and .16 stable series. This is a long standing bug that seems to have only recently become apparent, presumably due to increasing use of NFS over TCP - many distros seem to be making it the default. The SK_CONN bit gets set when a listening socket may be ready for an accept, just as SK_DATA is set when data may be available. It is entirely possible for svc_tcp_accept to be called with neither of these set. It doesn't happen often but there is a small race in svc_sock_enqueue as SK_CONN and SK_DATA are tested outside the spin_lock. They could be cleared immediately after the test and before the lock is gained. This normally shouldn't be a problem. The sockets are non-blocking so trying to read() or accept() when ther is nothing to do is not a problem. However: svc_tcp_recvfrom makes the decision "Should I accept() or should I read()" based on whether SK_CONN is set or not. This usually works but is not safe. The decision should be based on whether it is a TCP_LISTEN socket or a TCP_CONNECTED socket. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: <stable@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| e05d722 | Alexey Dobriyan | 20 October 2006, 06:29:12 UTC | [PATCH] kernel/nsproxy.c: use kmemdup() Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| 3e2a532 | OGAWA Hirofumi | 20 October 2006, 06:29:11 UTC | [PATCH] ext3/4: fix J_ASSERT(transaction->t_updates > 0) in journal_stop() A disk generated some I/O error, after it, I hitted J_ASSERT(transaction->t_updates > 0) in journal_stop(). It seems to happened on ext3_truncate() path from stack trace. Then, maybe the following case may trigger J_ASSERT(transaction->t_updates > 0). ext3_truncate() -> ext3_free_branches() -> ext3_journal_test_restart() -> ext3_journal_restart() -> journal_restart() transaction->t_updates--; /* another process aborted journal */ -> start_this_handle() returns -EROFS without transaction->t_updates++; -> ext3_journal_stop() -> journal_stop() J_ASSERT(transaction->t_updates > 0) If journal was aborted in middle of journal_restart(), ext3_truncate() may trigger J_ASSERT(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| 82591e6 | Nick Piggin | 20 October 2006, 06:29:10 UTC | [PATCH] mm: more commenting on lock ordering Clarify lockorder comments now that sys_msync dropps mmap_sem before calling do_fsync. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| b95936c | Doug Warzecha | 20 October 2006, 06:29:09 UTC | [PATCH] firmware/dcdbas: add size check in smi_data_write Add a size check in smi_data_write to prevent possible wrapping problems with large pos values when calling smi_data_buf_realloc on 32-bit. Signed-off-by: Doug Warzecha <Douglas_Warzecha@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| 1cd441f | Dave Jones | 20 October 2006, 06:29:09 UTC | [PATCH] ipmi: fix return codes in failure case These returns should be negative, like the others in this function. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:44 UTC |
| c4ec7b0 | Dmitriy Monakhov | 20 October 2006, 06:29:08 UTC | [PATCH] mm: D-cache aliasing issue in cow_user_page --=-=-= from mm/memory.c: 1434 static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va) 1435 { 1436 /* 1437 * If the source page was a PFN mapping, we don't have 1438 * a "struct page" for it. We do a best-effort copy by 1439 * just copying from the original user address. If that 1440 * fails, we just zero-fill it. Live with it. 1441 */ 1442 if (unlikely(!src)) { 1443 void *kaddr = kmap_atomic(dst, KM_USER0); 1444 void __user *uaddr = (void __user *)(va & PAGE_MASK); 1445 1446 /* 1447 * This really shouldn't fail, because the page is there 1448 * in the page tables. But it might just be unreadable, 1449 * in which case we just give up and fill the result with 1450 * zeroes. 1451 */ 1452 if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) 1453 memset(kaddr, 0, PAGE_SIZE); 1454 kunmap_atomic(kaddr, KM_USER0); #### D-cache have to be flushed here. #### It seems it is just forgotten. 1455 return; 1456 1457 } 1458 copy_user_highpage(dst, src, va); #### Ok here. flush_dcache_page() called from this func if arch need it 1459 } Following is the patch fix this issue: Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| ca926e8 | Satoru Takeuchi | 20 October 2006, 06:29:06 UTC | [PATCH] doc: fixing cpu-hotplug documentation Fixing cpu-hotplug documentation as follows: - moving confusing asterisk on additional_cpus descrition - fixing some typos - unifying indentation for source code and command line example Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| fca4edb | Amol Lad | 20 October 2006, 06:29:06 UTC | [PATCH] drivers/isdn: ioremap balanced with iounmap ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by: Amol Lad <amol@verismonetworks.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| 6220ec7 | Andrew Morton | 20 October 2006, 06:29:05 UTC | [PATCH] highest_possible_node_id() linkage fix Qooting Adrian: - net/sunrpc/svc.c uses highest_possible_node_id() - include/linux/nodemask.h says highest_possible_node_id() is out-of-line #if MAX_NUMNODES > 1 - the out-of-line highest_possible_node_id() is in lib/cpumask.c - lib/Makefile: lib-$(CONFIG_SMP) += cpumask.o CONFIG_ARCH_DISCONTIGMEM_ENABLE=y, CONFIG_SMP=n, CONFIG_SUNRPC=y -> highest_possible_node_id() is used in net/sunrpc/svc.c CONFIG_NODES_SHIFT defined and > 0 -> include/linux/numa.h: MAX_NUMNODES > 1 -> compile error The bug is not present on architectures where ARCH_DISCONTIGMEM_ENABLE depends on NUMA (but m32r isn't the only affected architecture). So move the function into page_alloc.c Cc: Adrian Bunk <bunk@stusta.de> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| e51959f | Zachary Amsden | 20 October 2006, 06:29:04 UTC | [PATCH] Fix potential interrupts during alternative patching Interrupts must be disabled during alternative instruction patching. On systems with high timer IRQ rates, or when running in an emulator, timing differences can result in random kernel panics because of running partially patched instructions. This doesn't yet fix NMIs, which requires extricating the patch code from the late bug checking and is logically separate (and also less likely to cause problems). Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| a90b061 | Al Viro | 20 October 2006, 06:29:03 UTC | [PATCH] nfsd: nfs_replay_me We are using NFS_REPLAY_ME as a special error value that is never leaked to clients. That works fine; the only problem is mixing host- and network- endian values in the same objects. Network-endian equivalent would work just as fine; switch to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
| c7afef1 | Al Viro | 20 October 2006, 06:29:02 UTC | [PATCH] nfsd: misc endianness annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 20 October 2006, 17:26:43 UTC |
