Revision ef7c7c693b4b05a293678fd40ed1511bc94d6f61 authored by Igor Grinberg on 12 April 2012, 12:43:29 UTC, committed by Haojian Zhuang on 27 April 2012, 03:14:06 UTC
Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
1 parent a13b878
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.gitignore | -rw-r--r-- | 1014 bytes |
.mailmap | -rw-r--r-- | 4.2 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 92.8 KB |
Kbuild | -rw-r--r-- | 2.5 KB |
Kconfig | -rw-r--r-- | 252 bytes |
MAINTAINERS | -rw-r--r-- | 205.4 KB |
Makefile | -rw-r--r-- | 52.2 KB |
README | -rw-r--r-- | 17.0 KB |
REPORTING-BUGS | -rw-r--r-- | 3.3 KB |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...