Revision ef8cc8fe30a891bb629d7bb79ff493229b82a255 authored by Jordan K. Hubbard on 30 November 1998, 13:31:08 UTC, committed by Jordan K. Hubbard on 30 November 1998, 13:31:08 UTC
1 parent ddfa563
Makefile
#
# $Id: Makefile,v 1.109.2.34 1998/09/04 06:07:43 jkh Exp $
#
# Make command line options:
# -DCLOBBER will remove /usr/include
# -DMAKE_KERBEROS4 to build KerberosIV
#
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOTOOLS do not rebuild any tools first
# -DNOCRYPT will prevent building of crypt versions
# -DNOLKM do not build loadable kernel modules
# -DNOOBJDIR do not run ``${MAKE} obj''
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
# -DNOPERL do not make or install perl
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# world - buildworld + installworld
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
.if (!make(world)) && (!make(buildworld)) && (!make(installworld))
.MAKEFLAGS:= ${.MAKEFLAGS} -m ${.CURDIR}/share/mk
.endif
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(share/info)
SUBDIR+= share/info
.endif
# We must do include and lib first so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(include)
SUBDIR+= include
.endif
.if exists(lib)
SUBDIR+= lib
.endif
.if exists(bin)
SUBDIR+= bin
.endif
.if exists(games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(gnu)
SUBDIR+= gnu
.endif
.if exists(kerberosIV) && exists(crypto) && !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(libexec)
SUBDIR+= libexec
.endif
.if exists(sbin)
SUBDIR+= sbin
.endif
.if exists(share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(sys)
SUBDIR+= sys
.endif
.if exists(usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(usr.sbin)
SUBDIR+= usr.sbin
.endif
.if exists(secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
.if exists(lkm) && !defined(NOLKM)
SUBDIR+= lkm
.endif
# etc must be last for "distribute" to work
.if exists(etc) && make(distribute)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${_DIR}) & exists(${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
# Handle -DNOOBJDIR, -DNOCLEAN and -DNOCLEANDIR
.if defined(NOOBJDIR)
OBJDIR=
.else
OBJDIR= obj
.endif
.if defined(NOCLEAN)
CLEANDIR=
.else
.if defined(NOCLEANDIR)
CLEANDIR= clean
.else
CLEANDIR= cleandir
.endif
.endif
SUP?= cvsup
SUPFLAGS?= -g -L 2 -P -
#
# While building tools for bootstrapping, we dont need to waste time on
# profiled libraries or man pages. This speeds things up somewhat.
#
MK_FLAGS= -DNOINFO -DNOMAN -DNOPROFILE
#
# world
#
# Attempt to rebuild and reinstall *everything*, with reasonable chance of
# success, regardless of how old your existing system is.
#
# >> Beware, it overwrites the local build environment! <<
#
world:
@echo "--------------------------------------------------------------"
@echo "make world started on `LC_TIME=C date`"
@echo "--------------------------------------------------------------"
.if target(pre-world)
@echo
@echo "--------------------------------------------------------------"
@echo " Making 'pre-world' target"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${MAKE} pre-world
.endif
cd ${.CURDIR} && ${MAKE} buildworld
cd ${.CURDIR} && ${MAKE} -B installworld
.if target(post-world)
@echo
@echo "--------------------------------------------------------------"
@echo " Making 'post-world' target"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${MAKE} post-world
.endif
@echo
@echo "--------------------------------------------------------------"
@echo "make world completed on `LC_TIME=C date`"
@echo "--------------------------------------------------------------"
.if defined(MAKEOBJDIRPREFIX)
WORLDTMP= ${MAKEOBJDIRPREFIX}${.CURDIR}/tmp
.else
WORLDTMP= /usr/obj${.CURDIR}/tmp
.endif
STRICTTMPPATH= ${WORLDTMP}/sbin:${WORLDTMP}/usr/sbin:${WORLDTMP}/bin:${WORLDTMP}/usr/bin
TMPPATH= ${STRICTTMPPATH}:${PATH}
# XXX COMPILER_PATH is needed for finding cc1, ld and as
# XXX GCC_EXEC_PREFIX is for *crt.o. It is probably unnecssary now
# tbat LIBRARY_PATH is set. We still can't use -nostdlib, since gcc
# wouldn't link *crt.o or libgcc if it were used.
# XXX LD_LIBRARY_PATH is for ld.so. It is also used by ld, although we don't
# want that - all compile-time library paths should be resolved by gcc.
# It fails for set[ug]id executables (are any used?).
COMPILER_ENV= BISON_SIMPLE=${WORLDTMP}/usr/share/misc/bison.simple \
COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
GCC_EXEC_PREFIX=${WORLDTMP}/usr/lib/ \
LD_LIBRARY_PATH=${WORLDTMP}${SHLIBDIR} \
LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib
BMAKEENV= PATH=${TMPPATH} ${COMPILER_ENV} NOEXTRADEPEND=t
XMAKEENV= PATH=${STRICTTMPPATH} ${COMPILER_ENV} \
CC='cc -nostdinc' # XXX -nostdlib
# used to compile and install 'make' in temporary build tree
IBMAKE= ${BMAKEENV} ${MAKE} DESTDIR=${WORLDTMP}
# bootstrap make
BMAKE= ${BMAKEENV} ${WORLDTMP}/usr/bin/${MAKE} DESTDIR=${WORLDTMP}
# cross make used for compilation
XMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/${MAKE} DESTDIR=${WORLDTMP}
# cross make used for final installation
IXMAKE= ${XMAKEENV} ${WORLDTMP}/usr/bin/${MAKE}
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
buildworld:
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo " Cleaning up the temporary build tree"
@echo "--------------------------------------------------------------"
mkdir -p ${WORLDTMP}
chflags -R noschg ${WORLDTMP}/
rm -rf ${WORLDTMP}
.endif
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Making make"
@echo "--------------------------------------------------------------"
mkdir -p ${WORLDTMP}/usr/bin
.if !defined(NOCLEAN) || !defined(NOOBJDIR)
cd ${.CURDIR}/usr.bin/make && \
${IBMAKE} -I${.CURDIR}/share/mk ${CLEANDIR} ${OBJDIR}
.endif
cd ${.CURDIR}/usr.bin/make && \
${IBMAKE} -I${.CURDIR}/share/mk depend && \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} all && \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} install && \
${IBMAKE} -I${.CURDIR}/share/mk ${MK_FLAGS} clean cleandepend
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} hierarchy
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo " Cleaning up the obj tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} par-${CLEANDIR}
.endif
.if !defined(NOOBJDIR)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding the obj tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} par-obj
.endif
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} bootstrap
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding tools necessary to build the include files"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} include-tools
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding /usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && SHARED=symlinks ${BMAKE} includes
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding tools needed to build the libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} lib-tools
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding /usr/lib"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} libraries
.if !defined(NOTOOLS)
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding all other tools needed to build the world"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${BMAKE} build-tools
.endif
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${XMAKE} ${.MAKEFLAGS} par-depend
@echo
@echo "--------------------------------------------------------------"
@echo " Building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${XMAKE} all
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
installworld:
cd ${.CURDIR} && ${IXMAKE} reinstall
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo " Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${MAKE} hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo " Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ${MAKE} install
@echo
@echo "--------------------------------------------------------------"
@echo " Re-scanning the shared libraries.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && ldconfig -R
@echo
@echo "--------------------------------------------------------------"
@echo " Rebuilding man page indexes"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man && ${MAKE} makedb
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo "Running ${SUP}"
@echo "--------------------------------------------------------------"
@${SUP} ${SUPFLAGS} ${SUPFILE}
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo "Updating /usr/src from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR} && cvs -q update -P -d -r RELENG_2_2
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo " Building programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/sbin && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/libexec && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/usr.bin && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/usr.sbin && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/gnu/libexec && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/gnu/usr.bin && ${MAKE} ${.MAKEFLAGS} all
cd ${.CURDIR}/gnu/usr.sbin && ${MAKE} ${.MAKEFLAGS} all
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
# cd ${.CURDIR}/kerberosIV && ${MAKE} ${.MAKEFLAGS} most
#.endif
#.if !defined(NOSECURE) && !defined(NOCRYPT)
# cd ${.CURDIR}/secure && ${MAKE} ${.MAKEFLAGS} most
#.endif
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo " Installing programs only"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/bin && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/sbin && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/libexec && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/usr.bin && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/usr.sbin && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/gnu/libexec && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/gnu/usr.bin && ${MAKE} ${.MAKEFLAGS} install
cd ${.CURDIR}/gnu/usr.sbin && ${MAKE} ${.MAKEFLAGS} install
#.if defined(MAKE_KERBEROS4) && !defined(NOCRYPT)
# cd ${.CURDIR}/kerberos4 && ${MAKE} ${.MAKEFLAGS} installmost
#.endif
#.if !defined(NOSECURE) && !defined(NOCRYPT)
# cd ${.CURDIR}/secure && ${MAKE} ${.MAKEFLAGS} installmost
#.endif
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# heirarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc && ${MAKE} distrib-dirs
#
# bootstrap - [re]build tools needed to run the actual build, this includes
# tools needed by 'make depend', as some tools are needed to generate source
# for the dependency information to be gathered from.
#
bootstrap:
.if defined(DESTDIR)
rm -f ${DESTDIR}/usr/src/sys
ln -s ${.CURDIR}/sys ${DESTDIR}/usr/src
cd ${.CURDIR}/include && find -dx . | cpio -dump ${DESTDIR}/usr/include
cd ${.CURDIR}/include && make symlinks
.endif
cd ${.CURDIR}/usr.bin/make && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
cd ${.CURDIR}/usr.bin/xinstall && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
cd ${.CURDIR}/usr.bin/lex && ${MAKE} bootstrap && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} -DNOLIB all && \
${MAKE} ${MK_FLAGS} -DNOLIB -B install ${CLEANDIR}
.if !defined(NOOBJDIR)
cd ${.CURDIR}/usr.bin/lex && ${MAKE} obj
.endif
#
# include-tools - generally the same as 'bootstrap', except that it's for
# things that are specifically needed to generate include files.
#
# XXX should be merged with bootstrap, it's not worth keeeping them separate.
# Well, maybe it is now. We force 'cleandepend' here to avoid dependencies
# on cleaned away headers in ${WORLDTMP}.
#
include-tools:
cd ${.CURDIR}/usr.bin/rpcgen && ${MAKE} -B cleandepend depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
#
# includes - possibly generate and install the include files.
#
includes:
.if defined(CLOBBER)
rm -rf ${DESTDIR}/usr/include/*
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${DESTDIR}/usr/include
.endif
cd ${.CURDIR}/include && ${MAKE} -B all install
cd ${.CURDIR}/gnu/include && ${MAKE} install
cd ${.CURDIR}/gnu/lib/libreadline && ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libregex && ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libstdc++ && ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libg++ && ${MAKE} beforeinstall
cd ${.CURDIR}/gnu/lib/libdialog && ${MAKE} beforeinstall
.if exists(kerberosIV) && !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib/libacl && ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkadm && ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkafs && ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkdb && ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libkrb && ${MAKE} beforeinstall
cd ${.CURDIR}/kerberosIV/lib/libtelnet && ${MAKE} beforeinstall
.else
cd ${.CURDIR}/lib/libtelnet && ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/csu/i386 && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libalias && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libc && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcurses && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libedit && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libftpio && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmd && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libmytinfo && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libncurses && ${MAKE} beforeinstall
.if !defined(WANT_CSRG_LIBM)
cd ${.CURDIR}/lib/msun && ${MAKE} beforeinstall
.endif
cd ${.CURDIR}/lib/libpcap && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/librpcsvc && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libskey && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libtermcap && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libcom_err && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libss && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libscsi && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libutil && ${MAKE} beforeinstall
cd ${.CURDIR}/lib/libz && ${MAKE} beforeinstall
#
# lib-tools - build tools to compile and install the libraries.
#
# XXX gperf is required for cc
# XXX a new ld and tsort is required for cc
lib-tools:
.for d in \
gnu/usr.bin/gperf \
gnu/usr.bin/ld \
usr.bin/tsort \
gnu/usr.bin/as \
gnu/usr.bin/bison \
gnu/usr.bin/awk \
usr.bin/ar \
usr.bin/compile_et \
usr.bin/lex/lib \
usr.bin/mk_cmds \
usr.bin/nm \
usr.bin/ranlib \
usr.bin/uudecode \
gnu/usr.bin/cc
cd ${.CURDIR}/$d && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endfor
#
# libraries - build and install the libraries
#
libraries:
.if exists(lib/csu/i386)
cd ${.CURDIR}/lib/csu/i386 && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib/libcompat)
cd ${.CURDIR}/lib/libcompat && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib/libc)
cd ${.CURDIR}/lib/libc && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib/libmytinfo)
cd ${.CURDIR}/lib/libmytinfo && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib/libncurses)
cd ${.CURDIR}/lib/libncurses && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib/libtermcap)
cd ${.CURDIR}/lib/libtermcap && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(gnu)
cd ${.CURDIR}/gnu/lib && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(secure) && !defined(NOCRYPT) && !defined(NOSECURE)
cd ${.CURDIR}/secure/lib && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(lib)
cd ${.CURDIR}/lib && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(usr.bin/lex/lib)
cd ${.CURDIR}/usr.bin/lex/lib && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(kerberosIV) && exists(crypto) && !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
cd ${.CURDIR}/kerberosIV/lib && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
.if exists(usr.sbin/pcvt/keycap)
cd ${.CURDIR}/usr.sbin/pcvt/keycap && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endif
# Exclude perl from the build-tools if NOPERL is defined.
.if defined(NOPERL)
_perl=
.else
_perl= gnu/usr.bin/perl/perl
.endif
#
# build-tools - build and install any other tools needed to complete the
# compile and install.
# ifdef stale
# bc and cpp are required to build groff. Otherwise, the order here is
# mostly historical, i.e., bogus.
# chmod is used to build gcc's tmpmultilib[2] at obscure times.
# endif stale
# XXX uname is a bug - the target should not depend on the host.
#
build-tools:
.for d in \
bin/cat \
bin/chmod \
bin/cp \
bin/date \
bin/dd \
bin/echo \
usr.bin/yacc \
bin/expr \
bin/hostname \
bin/ln \
bin/ls \
bin/mkdir \
bin/mv \
bin/rm \
bin/test \
gnu/usr.bin/bc \
gnu/usr.bin/grep \
gnu/usr.bin/groff \
gnu/usr.bin/gzip \
gnu/usr.bin/man/makewhatis \
gnu/usr.bin/patch \
${_perl} \
gnu/usr.bin/sort \
gnu/usr.bin/texinfo \
usr.bin/basename \
usr.bin/cap_mkdb \
usr.bin/chflags \
usr.bin/cmp \
usr.bin/col \
usr.bin/cpp \
usr.bin/expand \
usr.bin/file2c \
usr.bin/find \
usr.bin/gencat \
usr.bin/id \
usr.bin/lorder \
usr.bin/m4 \
usr.bin/mkdep \
usr.bin/paste \
usr.bin/sed \
usr.bin/size \
usr.bin/soelim \
usr.bin/strip \
usr.bin/symorder \
usr.bin/touch \
usr.bin/tr \
usr.bin/true \
usr.bin/uname \
usr.bin/uuencode \
usr.bin/vgrind \
usr.bin/vi \
usr.bin/wc \
usr.sbin/chown \
usr.sbin/mtree \
usr.sbin/zic \
bin/sh
cd ${.CURDIR}/$d && ${MAKE} depend && \
${MAKE} ${MK_FLAGS} all && \
${MAKE} ${MK_FLAGS} -B install ${CLEANDIR} ${OBJDIR}
.endfor
.for __target in clean cleandir obj depend
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
if test -d ${.CURDIR}/${entry}.${MACHINE}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE}"; \
edir=${entry}.${MACHINE}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...