Revision efd79c02b812bc98785d91e2536da46ca7a78840 authored by morobking on 20 December 2022, 16:29:54 UTC, committed by morobking on 20 December 2022, 16:29:54 UTC
1 parent 009dd40
config-user-example.yml
###############################################################################
# Example user configuration file for ESMValTool
###############################################################################
#
# Note for users:
# --------------
# Site-specific entries for different HPC centers are given at the bottom of
# this file. Comment out/replace as needed. This default version of the file
# can be used in combination with the command line argument ``offline=False``
# If only certain values are allowed for an option, these are listed after
# ``---``. The option in square brackets is the default value, i.e., the one
# that is used if this option is omitted in the file.
#
###############################################################################
#
# Note for developers:
# -------------------
# Two identical copies of this file (``ESMValTool/config-user-example.yml`` and
# ``ESMValCore/esmvalcore/config-user.yml``) exist. If you change one of it,
# make sure to apply the changes to the other.
#
###############################################################################
---
# Destination directory where all output will be written
# Includes log files and performance stats.
output_dir: ~/esmvaltool_output
# Directory for storing downloaded climate data
download_dir: ~/climate_data
# Auxiliary data directory
# Used by some recipes to look for additional datasets.
auxiliary_data_dir: ~/auxiliary_data
# Run at most this many tasks in parallel --- [null]/1/2/3/4/...
# Set to ``null`` to use the number of available CPUs. If you run out of
# memory, try setting max_parallel_tasks to ``1`` and check the amount of
# memory you need for that by inspecting the file ``run/resource_usage.txt`` in
# the output directory. Using the number there you can increase the number of
# parallel tasks again to a reasonable number for the amount of memory
# available in your system.
max_parallel_tasks: null
# Disable automatic downloads --- [true]/false
# Disable the automatic download of missing CMIP3, CMIP5, CMIP6, CORDEX,
# and obs4MIPs data from ESGF by default. This is useful if you are working
# on a computer without an internet connection.
offline: true
# Log level of the console --- debug/[info]/warning/error
# For much more information printed to screen set log_level to ``debug``.
log_level: info
# Exit on warning --- true/[false]
# # Only used in NCL diagnostic scripts.
exit_on_warning: false
# Plot file format --- [png]/pdf/ps/eps/epsi
output_file_type: png
# Remove the ``preproc`` directory if the run was successful --- [true]/false
# By default this option is set to ``true``, so all preprocessor output files
# will be removed after a successful run. Set to ``false`` if you need those
# files.
remove_preproc_dir: true
# Use netCDF compression --- true/[false]
compress_netcdf: false
# Save intermediary cubes in the preprocessor --- true/[false]
# Setting this to ``true`` will save the output cube from each preprocessing
# step. These files are numbered according to the preprocessing order.
save_intermediary_cubes: false
# Path to custom ``config-developer.yml`` file
# This can be used to customise project configurations. See
# ``config-developer.yml`` for an example. Set to ``null`` to use the default.
config_developer_file: null
# Use a profiling tool for the diagnostic run --- [false]/true
# A profiler tells you which functions in your code take most time to run.
# Only available for Python diagnostics.
profile_diagnostic: false
# Rootpaths to the data from different projects
# This default setting will work if files have been downloaded by the
# ESMValTool via ``offline=False``. Lists are also possible. For site-specific
# entries and more examples, see below. Comment out these when using a
# site-specific path.
rootpath:
default: ~/climate_data
# Directory structure for input data --- [default]/ESGF/BADC/DKRZ/ETHZ/etc.
# This default setting will work if files have been downloaded by the
# ESMValTool via ``offline=False``. See ``config-developer.yml`` for
# definitions. Comment out/replace as per needed.
drs:
CMIP3: ESGF
CMIP5: ESGF
CMIP6: ESGF
CORDEX: ESGF
obs4MIPs: ESGF
# Example rootpaths and directory structure that showcases the different
# projects and also the use of lists
# For site-specific entries, see below.
#rootpath:
# CMIP3: [~/cmip3_inputpath1, ~/cmip3_inputpath2]
# CMIP5: [~/cmip5_inputpath1, ~/cmip5_inputpath2]
# CMIP6: [~/cmip6_inputpath1, ~/cmip6_inputpath2]
# OBS: ~/obs_inputpath
# OBS6: ~/obs6_inputpath
# obs4MIPs: ~/obs4mips_inputpath
# ana4mips: ~/ana4mips_inputpath
# native6: ~/native6_inputpath
# RAWOBS: ~/rawobs_inputpath
# default: ~/default_inputpath
#drs:
# CMIP3: default
# CMIP5: default
# CMIP6: default
# CORDEX: default
# obs4MIPs: default
# Directory tree created by automatically downloading from ESGF
# Uncomment the lines below to locate data that has been automatically
# downloaded from ESGF (using ``offline: false``).
#rootpath:
# CMIP3: ~/climate_data
# CMIP5: ~/climate_data
# CMIP6: ~/climate_data
# CORDEX: ~/climate_data
# obs4MIPs: ~/climate_data
#drs:
# CMIP3: ESGF
# CMIP5: ESGF
# CMIP6: ESGF
# CORDEX: ESGF
# obs4MIPs: ESGF
# Site-specific entries: JASMIN
# Uncomment the lines below to locate data on JASMIN.
#auxiliary_data_dir: /gws/nopw/j04/esmeval/aux_data/AUX
#rootpath:
# CMIP6: /badc/cmip6/data/CMIP6
# CMIP5: /badc/cmip5/data/cmip5/output1
# CMIP3: /badc/cmip3_drs/data/cmip3/output
# OBS: /gws/nopw/j04/esmeval/obsdata-v2
# OBS6: /gws/nopw/j04/esmeval/obsdata-v2
# obs4MIPs: /gws/nopw/j04/esmeval/obsdata-v2
# ana4mips: /gws/nopw/j04/esmeval/obsdata-v2
# CORDEX: /badc/cordex/data/CORDEX/output
#drs:
# CMIP6: BADC
# CMIP5: BADC
# CMIP3: BADC
# CORDEX: BADC
# OBS: default
# OBS6: default
# obs4MIPs: default
# ana4mips: default
# Site-specific entries: DKRZ
# Uncomment the lines below to locate data on Mistral at DKRZ.
# Note: Use ``offline: false`` only on login and prepost nodes.
#auxiliary_data_dir: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/AUX
#rootpath:
# CMIP6: /mnt/lustre02/work/ik1017/CMIP6/data/CMIP6
# CMIP5: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/CMIP5_DKRZ
# CMIP3: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/CMIP3
# CORDEX: /mnt/lustre02/work/ik1017/C3SCORDEX/data/c3s-cordex/output
# OBS: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/OBS
# OBS6: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/OBS
# obs4MIPs: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/OBS
# ana4mips: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/OBS
# native6: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/RAWOBS
# RAWOBS: /mnt/lustre02/work/bd0854/DATA/ESMValTool2/RAWOBS
#drs:
# CMIP6: DKRZ
# CMIP5: DKRZ
# CMIP3: DKRZ
# CORDEX: BADC
# obs4MIPs: default
# ana4mips: default
# OBS: default
# OBS6: default
# native6: default
# Site-specific entries: ETHZ
# Uncomment the lines below to locate data at ETHZ.
#rootpath:
# CMIP6: /net/atmos/data/cmip6
# CMIP5: /net/atmos/data/cmip5
# CMIP3: /net/atmos/data/cmip3
# OBS: /net/exo/landclim/PROJECTS/C3S/datadir/obsdir/
#drs:
# CMIP6: ETHZ
# CMIP5: ETHZ
# CMIP3: ETHZ
# Site-specific entries: IPSL
# Uncomment the lines below to locate data on Ciclad at IPSL.
#rootpath:
# IPSLCM: /
# CMIP5: /bdd/CMIP5/output
# CMIP6: /bdd/CMIP6
# CMIP3: /bdd/CMIP3
# CORDEX: /bdd/CORDEX/output
# obs4MIPs: /bdd/obs4MIPS/obs-CFMIP/observations
# ana4mips: /not_yet
# OBS: /not_yet
# OBS6: /not_yet
# RAWOBS: /not_yet
#drs:
# CMIP6: DKRZ
# CMIP5: DKRZ
# CMIP3: IPSL
# CORDEX: BADC
# obs4MIPs: IPSL
# ana4mips: default
# OBS: not_yet
# OBS6: not_yet
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...