| f005de0 | Greg Kroah-Hartman | 29 September 2018, 00:43:32 UTC | Merge tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Michael writes: "powerpc fixes for 4.19 #3 A reasonably big batch of fixes due to me being away for a few weeks. A fix for the TM emulation support on Power9, which could result in corrupting the guest r11 when running under KVM. Two fixes to the TM code which could lead to userspace GPR corruption if we take an SLB miss at exactly the wrong time. Our dynamic patching code had a bug that meant we could patch freed __init text, which could lead to corrupting userspace memory. csum_ipv6_magic() didn't work on little endian platforms since we optimised it recently. A fix for an endian bug when reading a device tree property telling us how many storage keys the machine has available. Fix a crash seen on some configurations of PowerVM when migrating the partition from one machine to another. A fix for a regression in the setup of our CPU to NUMA node mapping in KVM guests. A fix to our selftest Makefiles to make them work since a recent change to the shared Makefile logic." * tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix Makefiles for headers_install change powerpc/numa: Use associativity if VPHN hcall is successful powerpc/tm: Avoid possible userspace r1 corruption on reclaim powerpc/tm: Fix userspace r13 corruption powerpc/pseries: Fix unitialized timer reset on migration powerpc/pkeys: Fix reading of ibm, processor-storage-keys property powerpc: fix csum_ipv6_magic() on little endian platforms powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again) powerpc: Avoid code patching freed init sections KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds | 29 September 2018, 00:43:32 UTC |
| 900915f | Greg Kroah-Hartman | 29 September 2018, 00:42:44 UTC | Merge tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Linus writes: "Pin control fixes for v4.19: - Fixes to x86 hardware: - AMD interrupt debounce issues - Faulty Intel cannonlake register offset - Revert pin translation IRQ locking" * tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: intel: Do pin translation when lock IRQ" pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type | 29 September 2018, 00:42:44 UTC |
| f151f57 | Greg Kroah-Hartman | 28 September 2018, 16:55:17 UTC | Merge tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm Dave writes: "drm fixes for 4.19-rc6 Looks like a pretty normal week for graphics, core: syncobj fix, panel link regression revert amd: suspend/resume fixes, EDID emulation fix mali-dp: NV12 writeback and vblank reset fixes etnaviv: DMA setup fix" * tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set drm/malidp: Fix writeback in NV12 drm: mali-dp: Call drm_crtc_vblank_reset on device init drm/etnaviv: add DMA configuration for etnaviv platform device | 28 September 2018, 16:55:17 UTC |
| ed1b3f4 | Greg Kroah-Hartman | 28 September 2018, 16:53:22 UTC | Merge tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Palmer writes: "A Single RISC-V Update for 4.19-rc6 The Debian guys have been pushing on our port and found some unversioned symbols leaking into modules. This PR contains a single fix for that issue." * tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: include linux/ftrace.h in asm-prototypes.h | 28 September 2018, 16:53:22 UTC |
| 278e59a | Greg Kroah-Hartman | 28 September 2018, 16:20:41 UTC | Merge tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Bjorn writes: "PCI fixes: - Fix ACPI hotplug issue that causes black screen crash at boot (Mika Westerberg) - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang) - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn Helgaas) - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)" * tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge PCI: dwc: Fix scheduling while atomic issues MAINTAINERS: Move mobiveil PCI driver entry where it belongs MAINTAINERS: Update PPC contacts for PCI core error handling | 28 September 2018, 16:20:41 UTC |
| 7e0cf1c | Michael Ellerman | 28 September 2018, 04:53:18 UTC | selftests/powerpc: Fix Makefiles for headers_install change Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") introduced a requirement that Makefiles more than one level below the selftests directory need to define top_srcdir, but it didn't update any of the powerpc Makefiles. This broke building all the powerpc selftests with eg: make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc' BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment' ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make[2]: *** No rule to make target '../../../../scripts/subarch.include'. make[2]: Failed to remake makefile '../../../../scripts/subarch.include'. Makefile:38: recipe for target 'alignment' failed Fix it by setting top_srcdir in the affected Makefiles. Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 28 September 2018, 05:07:45 UTC |
| fcb1349 | Dave Airlie | 27 September 2018, 23:30:11 UTC | Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Just a few fixes for 4.19: - Couple of suspend/resume fixes - Fix EDID emulation with DC Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180927155418.2813-1-alexander.deucher@amd.com | 27 September 2018, 23:30:22 UTC |
| adba0e5 | Dave Airlie | 27 September 2018, 23:25:26 UTC | Merge tag 'drm-misc-fixes-2018-09-27-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Revert adding device-link to panels - Don't leak fences in drm/syncobj Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180927152712.GA53076@art_vandelay | 27 September 2018, 23:25:56 UTC |
| ad03714 | Greg Kroah-Hartman | 27 September 2018, 19:53:55 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Jason writes: "Second RDMA rc pull request - Fix a long standing race bug when destroying comp_event file descriptors - srp, hfi1, bnxt_re: Various driver crashes from missing validation and other cases - Fixes for regressions in patches merged this window in the gid cache, devx, ucma and uapi." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Set right entry state before releasing reference IB/mlx5: Destroy the DEVX object upon error flow IB/uverbs: Free uapi on destroy RDMA/bnxt_re: Fix system crash during RDMA resource initialization IB/hfi1: Fix destroy_qp hang after a link down IB/hfi1: Fix context recovery when PBC has an UnsupportedVL IB/hfi1: Invalid user input can result in crash IB/hfi1: Fix SL array bounds check RDMA/uverbs: Fix validity check for modify QP IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop ucma: fix a use-after-free in ucma_resolve_ip() RDMA/uverbs: Atomically flush and mark closed the comp event queue cxgb4: fix abort_req_rss6 struct | 27 September 2018, 19:53:55 UTC |
| c127e59 | Greg Kroah-Hartman | 27 September 2018, 19:16:24 UTC | Merge tag 'for_v4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Jan writes: "an ext2 patch fixing fsync(2) for DAX mounts." * tag 'for_v4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2, dax: set ext2_dax_aops for dax files | 27 September 2018, 19:16:24 UTC |
| fbbdadf | Bhawanpreet Lakha | 26 September 2018, 17:42:10 UTC | drm/amd/display: Fix Edid emulation for linux [Why] EDID emulation didn't work properly for linux, as we stop programming if nothing is connected physically. [How] We get a flag from DRM when we want to do edid emulation. We check if this flag is true and nothing is connected physically, if so we only program the front end using VIRTUAL_SIGNAL. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 27 September 2018, 15:05:21 UTC |
| 599760d | Roman Li | 26 September 2018, 17:42:16 UTC | drm/amd/display: Fix Vega10 lightup on S3 resume [Why] There have been a few reports of Vega10 display remaining blank after S3 resume. The regression is caused by workaround for mode change on Vega10 - skip set_bandwidth if stream count is 0. As a result we skipped dispclk reset on suspend, thus on resume we may skip the clock update assuming it hasn't been changed. On some systems it causes display blank or 'out of range'. [How] Revert "drm/amd/display: Fix Vega10 black screen after mode change" Verified that it hadn't cause mode change regression. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 27 September 2018, 15:03:12 UTC |
| 61ea6f5 | Rex Zhu | 27 September 2018, 12:48:39 UTC | drm/amdgpu: Fix vce work queue was not cancelled when suspend The vce cancel_delayed_work_sync never be called. driver call the function in error path. This caused the A+A suspend hang when runtime pm enebled. As we will visit the smu in the idle queue. this will cause smu hang because the dgpu has been suspend, and the dgpu also will be waked up. As the smu has been hang, so the dgpu resume will failed. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 27 September 2018, 15:01:20 UTC |
| d6a77ba | Linus Walleij | 27 September 2018, 12:41:30 UTC | Revert "drm/panel: Add device_link from panel device to DRM device" This reverts commit 0c08754b59da5557532d946599854e6df28edc22. commit 0c08754b59da ("drm/panel: Add device_link from panel device to DRM device") creates a circular dependency under these circumstances: 1. The panel depends on dsi-host because it is MIPI-DSI child device. 2. dsi-host depends on the drm parent device (connector->dev->dev) this should be allowed. 3. drm parent dev (connector->dev->dev) depends on the panel after this patch. This makes the dependency circular and while it appears it does not affect any in-tree drivers (they do not seem to have dsi hosts depending on the same parent device) this does not seem right. As noted in a response from Andrzej Hajda, the intent is likely to make the panel dependent on the DRM device (connector->dev) not its parent. But we have no way of doing that since the DRM device doesn't contain any struct device on its own (arguably it should). Revert this until a proper approach is figured out. Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org | 27 September 2018, 15:00:42 UTC |
| 576156b | Dave Airlie | 27 September 2018, 00:49:44 UTC | Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld into drm-fixes Fix NV12 writeback and fix vblank reset. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180921112354.GR936@e110455-lin.cambridge.arm.com | 27 September 2018, 00:49:44 UTC |
| e89fe98 | Dave Airlie | 27 September 2018, 00:19:26 UTC | Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes one fix to get a proper DMA configuration in place for the etnaviv virtual device. I'm sending this as a fix, as a dma-mapping change at the ARC architecture side during the 4.19 cycle broke etnaviv on this platform, which gets remedied with this patch, but it also enables ARM64. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/ea1f712bf09bf9439c6b092bf2c2bde7bb01cf5e.camel@pengutronix.de | 27 September 2018, 00:49:10 UTC |
| f188b99 | Mika Westerberg | 26 September 2018, 20:39:28 UTC | ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports themselves are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC: ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event() It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls enable_slot() directly (instead of going through acpiphp_check_bridge() as there is no bridge), which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on a few fix proposals it was tracked to crash somewhere inside pci_assign_unassigned_bridge_resources(). In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device). Fix this so that we only go to that special branch if we are calling enable_slot() for a bridge (e.g., the ACPI notification was for the bridge). Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127 Fixes: 84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") Reported-by: Peter Anemone <peter.anemone@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.18+ | 26 September 2018, 20:39:28 UTC |
| 337fe9f | Jason Ekstrand | 26 September 2018, 07:17:03 UTC | drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set We attempt to get fences earlier in the hopes that everything will already have fences and no callbacks will be needed. If we do succeed in getting a fence, getting one a second time will result in a duplicate ref with no unref. This is causing memory leaks in Vulkan applications that create a lot of fences; playing for a few hours can, apparently, bring down the system. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com | 26 September 2018, 14:39:14 UTC |
| c307aaf | Greg Kroah-Hartman | 26 September 2018, 11:08:53 UTC | Merge tag 'iommu-fixes-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Joerg writes: "IOMMU Fixes for Linux v4.19-rc5 Three fixes queued up: - Warning fix for Rockchip IOMMU where there were IRQ handlers for offlined hardware. - Fix for Intel VT-d because recent changes caused boot failures on some machines because it tried to allocate to much contiguous memory. - Fix for AMD IOMMU to handle eMMC devices correctly that appear as ACPI HID devices." * tag 'iommu-fixes-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Return devid as alias for ACPI HID devices iommu/vt-d: Handle memory shortage on pasid table allocation iommu/rockchip: Free irqs in shutdown handler | 26 September 2018, 11:09:18 UTC |
| 5ebb1bc | Arindam Nath | 18 September 2018, 10:10:58 UTC | iommu/amd: Return devid as alias for ACPI HID devices ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Fixes: 2bf9a0a12749 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel <jroedel@suse.de> | 26 September 2018, 07:41:11 UTC |
| 5c5702e | Parav Pandit | 25 September 2018, 09:10:40 UTC | RDMA/core: Set right entry state before releasing reference Currently add_modify_gid() for IB link layer has followong issue in cache update path. When GID update event occurs, core releases reference to the GID table without updating its state and/or entry pointer. CPU-0 CPU-1 ------ ----- ib_cache_update() IPoIB ULP add_modify_gid() [..] put_gid_entry() refcnt = 0, but state = valid, entry is valid. (work item is not yet executed). ipoib_create_ah() rdma_create_ah() rdma_get_gid_attr() <-- Tries to acquire gid_attr which has refcnt = 0. This is incorrect. GID entry state and entry pointer is provides the accurate GID enty state. Such fields must be updated with rwlock to protect against readers and, such fields must be in sane state before refcount can drop to zero. Otherwise above race condition can happen leading to use-after-free situation. Following backtrace has been observed when cache update for an IB port is triggered while IPoIB ULP is creating an AH. Therefore, when updating GID entry, first mark a valid entry as invalid through state and set the barrier so that no callers can acquired the GID entry, followed by release reference to it. refcount_t: increment on 0; use-after-free. WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:refcount_inc_checked+0x30/0x50 RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100 RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8 R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202 FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0 IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready Call Trace: rdma_get_gid_attr+0x220/0x310 [ib_core] ? lock_acquire+0x145/0x3a0 rdma_fill_sgid_attr+0x32c/0x470 [ib_core] rdma_create_ah+0x89/0x160 [ib_core] ? rdma_fill_sgid_attr+0x470/0x470 [ib_core] ? ipoib_create_ah+0x52/0x260 [ib_ipoib] ipoib_create_ah+0xf5/0x260 [ib_ipoib] ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib] Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 25 September 2018, 21:01:09 UTC |
| e8ef090 | Yishai Hadas | 25 September 2018, 09:11:12 UTC | IB/mlx5: Destroy the DEVX object upon error flow Upon DEVX object creation the object must be destroyed upon a follows error flow. Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 25 September 2018, 20:49:17 UTC |
| a9360ab | Mark Bloch | 25 September 2018, 08:23:55 UTC | IB/uverbs: Free uapi on destroy Make sure we free struct uverbs_api once we clean the radix tree. It was allocated by uverbs_alloc_api(). Fixes: 9ed3e5f44772 ("IB/uverbs: Build the specs into a radix tree at runtime") Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 25 September 2018, 20:47:33 UTC |
| a385231 | Greg Kroah-Hartman | 25 September 2018, 19:37:41 UTC | erge tag 'libnvdimm-fixes-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Dan writes: "libnvdimm/dax for 4.19-rc6 * (2) fixes for the dax error handling updates that were merged for v4.19-rc1. My mails to Al have been bouncing recently, so I do not have his ack but the uaccess change is of the trivial / obviously correct variety. The address_space_operations fixes a regression. * A filesystem-dax fix to correct the zero page lookup to be compatible with non-x86 (mips and s390) architectures." * tag 'libnvdimm-fixes-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: Add missing address_space_operations uaccess: Fix is_source param for check_copy_size() in copy_to_iter_mcsafe() filesystem-dax: Fix use of zero page | 25 September 2018, 19:37:41 UTC |
| 846e8dd | Greg Kroah-Hartman | 25 September 2018, 16:14:14 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi James writes: "SCSI fixes on 20180925 Nine obvious bug fixes mostly in individual drivers. The target fix is of particular importance because it's CVE related." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: don't crash the host on invalid commands scsi: ipr: System hung while dlpar adding primary ipr adapter back scsi: target: iscsi: Use bin2hex instead of a re-implementation scsi: target: iscsi: Use hex2bin instead of a re-implementation scsi: lpfc: Synchronize access to remoteport via rport scsi: ufs: Disable blk-mq for now scsi: sd: Contribute to randomness when running rotational device scsi: ibmvscsis: Ensure partition name is properly NUL terminated scsi: ibmvscsis: Fix a stringop-overflow warning | 25 September 2018, 16:14:14 UTC |
| bfb0e9b | Greg Kroah-Hartman | 25 September 2018, 15:54:55 UTC | Merge tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb I wrote: "USB fixes for 4.19-rc6 Here are some small USB core and driver fixes for reported issues for 4.19-rc6. The most visible is the oops fix for when the USB core is built into the kernel that is present in 4.18. Turns out not many people actually do that so it went unnoticed for a while. The rest is some tiny typec, musb, and other core fixes. All have been in linux-next with no reported issues." * tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: mux: Take care of driver module reference counting usb: core: safely deal with the dynamic quirk lists usb: roles: Take care of driver module reference counting USB: handle NULL config in usb_find_alt_setting() USB: fix error handling in usb_driver_claim_interface() USB: remove LPM management from usb_driver_claim_interface() USB: usbdevfs: restore warning for nonsensical flags USB: usbdevfs: sanitize flags more Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()" usb: musb: dsps: do not disable CPPI41 irq in driver teardown | 25 September 2018, 15:54:55 UTC |
| ccf791e | Greg Kroah-Hartman | 25 September 2018, 15:22:50 UTC | Merge tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty I wrote: "TTY/Serial driver fixes for 4.19-rc6 Here are a number of small tty and serial driver fixes for reported issues for 4.19-rc6. One should hopefully resolve a much-reported issue that syzbot has found in the tty layer. Although there are still more issues there, getting this fixed is nice to see finally happen. All of these have been in linux-next for a while with no reported issues." * tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: restore handshaking irq for imx1 tty: vt_ioctl: fix potential Spectre v1 tty: Drop tty->count on tty_reopen() failure serial: cpm_uart: return immediately from console poll tty: serial: lpuart: avoid leaking struct tty_struct serial: mvebu-uart: Fix reporting of effective CSIZE to userspace | 25 September 2018, 15:22:50 UTC |
| fc0c814 | Greg Kroah-Hartman | 25 September 2018, 15:01:52 UTC | Merge tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Greg (well I), wrote: "Char/Misc driver fixes for 4.19-rc6 Here are some soundwire and intel_th (tracing) driver fixes for some reported issues. All of these have been in linux-next for a week with no reported issues." * tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Ice Lake PCH support intel_th: Fix resource handling for ACPI glue layer intel_th: Fix device removal logic soundwire: Fix acquiring bus lock twice during master release soundwire: Fix incorrect exit after configuring stream soundwire: Fix duplicate stream state assignment | 25 September 2018, 15:01:52 UTC |
| 2483ef0 | Srikar Dronamraju | 25 September 2018, 12:25:15 UTC | powerpc/numa: Use associativity if VPHN hcall is successful Currently associativity is used to lookup node-id even if the preceding VPHN hcall failed. However this can cause CPU to be made part of the wrong node, (most likely to be node 0). This is because VPHN is not enabled on KVM guests. With 2ea6263 ("powerpc/topology: Get topology for shared processors at boot"), associativity is used to set to the wrong node. Hence KVM guest topology is broken. For example : A 4 node KVM guest before would have reported. [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 node 0 size: 1746 MB node 0 free: 1604 MB node 1 cpus: 4 5 6 7 node 1 size: 2044 MB node 1 free: 1765 MB node 2 cpus: 8 9 10 11 node 2 size: 2044 MB node 2 free: 1837 MB node 3 cpus: 12 13 14 15 node 3 size: 2044 MB node 3 free: 1903 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Would now report: [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 1746 MB node 0 free: 1244 MB node 1 cpus: node 1 size: 2044 MB node 1 free: 2032 MB node 2 cpus: 1 node 2 size: 2044 MB node 2 free: 2028 MB node 3 cpus: node 3 size: 2044 MB node 3 free: 2032 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Fix this by skipping associativity lookup if the VPHN hcall failed. Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 25 September 2018, 13:05:08 UTC |
| 96dc89d | Michael Neuling | 25 September 2018, 09:36:47 UTC | powerpc/tm: Avoid possible userspace r1 corruption on reclaim Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct. In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do. We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is. This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on. Suggested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 25 September 2018, 12:51:32 UTC |
| cf13435 | Michael Neuling | 24 September 2018, 07:27:04 UTC | powerpc/tm: Fix userspace r13 corruption When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct. Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13. To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct. Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address. Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 25 September 2018, 12:51:08 UTC |
| be9e659 | Lu Baolu | 08 September 2018, 01:42:53 UTC | iommu/vt-d: Handle memory shortage on pasid table allocation Pasid table memory allocation could return failure due to memory shortage. Limit the pasid table size to 1MiB because current 8MiB contiguous physical memory allocation can be hard to come by. W/o a PASID table, the device could continue to work with only shared virtual memory impacted. So, let's go ahead with context mapping even the memory allocation for pasid table failed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783 Fixes: cc580e41260d ("iommu/vt-d: Per PCI device pasid table interfaces") Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 25 September 2018, 12:33:02 UTC |
| 8c0f9f5 | Lubomir Rintel | 24 September 2018, 12:18:34 UTC | Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name" This changes UAPI, breaking iwd and libell: ell/key.c: In function 'kernel_dh_compute': ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'? struct keyctl_dh_params params = { .private = private, ^~~~~~~ dh_private This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8. Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David Howells <dhowells@redhat.com> cc: Randy Dunlap <rdunlap@infradead.org> cc: Mat Martineau <mathew.j.martineau@linux.intel.com> cc: Stephan Mueller <smueller@chronox.de> cc: James Morris <jmorris@namei.org> cc: "Serge E. Hallyn" <serge@hallyn.com> cc: Mat Martineau <mathew.j.martineau@linux.intel.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: <stable@vger.kernel.org> Signed-off-by: James Morris <james.morris@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 25 September 2018, 11:28:58 UTC |
| 72923e5 | Mika Westerberg | 24 September 2018, 14:32:12 UTC | Revert "pinctrl: intel: Do pin translation when lock IRQ" This reverts commit 55aedef50d4d810670916d9fce4a40d5da2079e7. Commit 55aedef50d4d ("pinctrl: intel: Do pin translation when lock IRQ") added special translation from GPIO number to hardware pin number to irq_reqres/relres hooks to avoid failure when IRQs are requested. The actual failure happened inside gpiochip_lock_as_irq() because it calls gpiod_get_direction() and pinctrl-intel.c::intel_gpio_get_direction() implementation originally missed the translation so the two hooks made it work by skipping the ->get_direction() call entirely (it overwrote the default GPIOLIB provided functions). The proper fix that adds translation to GPIO callbacks was merged with commit 96147db1e1df ("pinctrl: intel: Do pin translation in other GPIO operations as well"). This allows us to use the default GPIOLIB provided functions again. In addition as find out by Benjamin Tissoires the two functions (intel_gpio_irq_reqres()/intel_gpio_irq_relres()) now cause problems of their own because they operate on pin numbers and pass that pin number to gpiochip_lock_as_irq() which actually expects a GPIO number. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199911 Fixes: 55aedef50d4d ("pinctrl: intel: Do pin translation when lock IRQ") Reported-and-tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 25 September 2018, 10:50:00 UTC |
| e50d95e | Mika Westerberg | 24 September 2018, 14:32:11 UTC | pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant It turns out the HOSTSW_OWN register offset is different between LP and H variants. The latter should use 0xc0 instead so fix that. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199911 Fixes: a663ccf0fea1 ("pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller support") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 25 September 2018, 10:48:15 UTC |
| b85bfa2 | Daniel Kurtz | 22 September 2018, 19:58:26 UTC | pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type From the AMD BKDG, if WAKE_INT_MASTER_REG.MaskStsEn is set, a software write to the debounce registers of *any* gpio will block wake/interrupt status generation for *all* gpios for a length of time that depends on WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the Interrupt Delivery bit (INTERRUPT_ENABLE) will read as 0. In commit 4c1de0414a1340 ("pinctrl/amd: poll InterruptEnable bits in enable_irq") we tried to fix this same "gpio Interrupts are blocked immediately after writing debounce registers" problem, but incorrectly assumed it only affected the gpio whose debounce was being configured and not ALL gpios. To solve this for all gpios, we move the polling loop from amd_gpio_irq_enable() to amd_gpio_irq_set_type(), while holding the gpio spinlock. This ensures that another gpio operation (e.g. amd_gpio_irq_unmask()) can read a temporarily disabled IRQ and incorrectly disable it while trying to modify some other register bits. Fixes: 4c1de0414a1340 pinctrl/amd: poll InterruptEnable bits in enable_irq Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 25 September 2018, 10:39:19 UTC |
| 2dd68cc | Greg Kroah-Hartman | 25 September 2018, 09:19:28 UTC | Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net Dave writes: "Networking fixes: 1) Fix multiqueue handling of coalesce timer in stmmac, from Jose Abreu. 2) Fix memory corruption in NFC, from Suren Baghdasaryan. 3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi. 4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun. 5) Fix TX done race in mvpp2, from Antoine Tenart. 6) ipv6 metrics leak, from Wei Wang. 7) Adjust firmware version requirements in mlxsw, from Petr Machata. 8) Fix autonegotiation on resume in r8169, from Heiner Kallweit. 9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff Barnhill. 10) Fix double free in devlink, from Dan Carpenter. 11) Fix ethtool regression from UFO feature removal, from Maciej Żenczykowski. 12) Fix drivers that have a ndo_poll_controller() that captures the cpu entirely on loaded hosts by trying to drain all rx and tx queues, from Eric Dumazet. 13) Fix memory corruption with jumbo frames in aquantia driver, from Friedemann Gerold." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits) net: mvneta: fix the remaining Rx descriptor unmapping issues ip_tunnel: be careful when accessing the inner header mpls: allow routes on ip6gre devices net: aquantia: memory corruption on jumbo frames tun: remove ndo_poll_controller nfp: remove ndo_poll_controller bnxt: remove ndo_poll_controller bnx2x: remove ndo_poll_controller mlx5: remove ndo_poll_controller mlx4: remove ndo_poll_controller i40evf: remove ndo_poll_controller ice: remove ndo_poll_controller igb: remove ndo_poll_controller ixgb: remove ndo_poll_controller fm10k: remove ndo_poll_controller ixgbevf: remove ndo_poll_controller ixgbe: remove ndo_poll_controller bonding: use netpoll_poll_dev() helper netpoll: make ndo_poll_controller() optional rds: Fix build regression. ... | 25 September 2018, 09:19:49 UTC |
| 74bc2ab | Heiko Stuebner | 27 August 2018, 10:56:24 UTC | iommu/rockchip: Free irqs in shutdown handler In the iommu's shutdown handler we disable runtime-pm which could result in the irq-handler running unclocked and since commit 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework") we warn about that fact. This can cause warnings on shutdown on some Rockchip machines, so free the irqs in the shutdown handler before we disable runtime-pm. Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Fixes: 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 25 September 2018, 09:13:34 UTC |
| 57a4897 | James Cowgill | 06 September 2018, 21:57:56 UTC | RISC-V: include linux/ftrace.h in asm-prototypes.h Building a riscv kernel with CONFIG_FUNCTION_TRACER and CONFIG_MODVERSIONS enabled results in these two warnings: MODPOST vmlinux.o WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. When exporting symbols from an assembly file, the MODVERSIONS code requires their prototypes to be defined in asm-prototypes.h (see scripts/Makefile.build). Since both of these symbols have prototypes defined in linux/ftrace.h, include this header from RISC-V's asm-prototypes.h. Reported-by: Karsten Merker <merker@debian.org> Signed-off-by: James Cowgill <jcowgill@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> | 24 September 2018, 20:12:27 UTC |
| f4a5187 | Antoine Tenart | 24 September 2018, 14:56:13 UTC | net: mvneta: fix the remaining Rx descriptor unmapping issues With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in various places of the mvneta driver, for example when putting down an interface while traffic is passing through. The issue is when using s/w buffer management, the Rx buffers are mapped using dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 19:27:28 UTC |
| ccfec9e | Paolo Abeni | 24 September 2018, 13:48:19 UTC | ip_tunnel: be careful when accessing the inner header Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") even for ipv4 tunnels. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 19:27:04 UTC |
| d8e2262 | Saif Hasan | 21 September 2018, 21:30:05 UTC | mpls: allow routes on ip6gre devices Summary: This appears to be necessary and sufficient change to enable `MPLS` on `ip6gre` tunnels (RFC4023). This diff allows IP6GRE devices to be recognized by MPLS kernel module and hence user can configure interface to accept packets with mpls headers as well setup mpls routes on them. Test Plan: Test plan consists of multiple containers connected via GRE-V6 tunnel. Then carrying out testing steps as below. - Carry out necessary sysctl settings on all containers ``` sysctl -w net.mpls.platform_labels=65536 sysctl -w net.mpls.ip_ttl_propagate=1 sysctl -w net.mpls.conf.lo.input=1 ``` - Establish IP6GRE tunnels ``` ip -6 tunnel add name if_1_2_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::2 key 1 ip link set dev if_1_2_1 up sysctl -w net.mpls.conf.if_1_2_1.input=1 ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link ip -6 tunnel add name if_1_3_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::3 key 1 ip link set dev if_1_3_1 up sysctl -w net.mpls.conf.if_1_3_1.input=1 ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link ``` - Install MPLS encap rules on node-1 towards node-2 ``` ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \ via inet 169.254.0.3 dev if_1_2_1 ``` - Install MPLS forwarding rules on node-2 and node-3 ``` // node2 ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1 // node3 ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1 ``` - Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing towards 192.168.0.1 is via IP route directly towards node1 from node4) ``` ping 192.168.0.11 ``` - tcpdump on interface to capture ping packets wrapped within MPLS header which inturn wrapped within IP6GRE header ``` 16:43:41.121073 IP6 2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2: DSTOPT GREv0, key=0x1, length 100: MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255) IP 192.168.0.1 > 192.168.0.11: ICMP echo request, id 1208, seq 45, length 64 0x0000: 6000 2cdb 006c 3c3f 2401 db00 0021 6048 `.,..l<?$....!`H 0x0010: feed 0000 0000 0001 2401 db00 0021 6048 ........$....!`H 0x0020: feed 0000 0000 0002 2f00 0401 0401 0100 ......../....... 0x0030: 2000 8847 0000 0001 0002 00ff 0004 01ff ...G............ 0x0040: 4500 0054 3280 4000 ff01 c7cb c0a8 0001 E..T2.@......... 0x0050: c0a8 000b 0800 a8d7 04b8 002d 2d3c a05b ...........--<.[ 0x0060: 0000 0000 bcd8 0100 0000 0000 1011 1213 ................ 0x0070: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 .............!"# 0x0080: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 $%&'()*+,-./0123 0x0090: 3435 3637 4567 ``` Signed-off-by: Saif Hasan <has@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 19:19:27 UTC |
| d2f85c9 | David S. Miller | 24 September 2018, 17:08:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2018-09-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Several fixes for BPF sockmap to only allow sockets being attached in ESTABLISHED state, from John. 2) Fix up the license to LGPL/BSD for the libc compat header which contains fallback helpers that libbpf and bpftool is using, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 17:08:45 UTC |
| de5c95d | Selvin Xavier | 21 September 2018, 05:33:00 UTC | RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 24 September 2018, 15:24:16 UTC |
| 02214bf | Greg Kroah-Hartman | 24 September 2018, 13:16:41 UTC | Merge tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Mauro briefly writes: "media fixes for v4.19-rc5 some drivers and Kbuild fixes" * tag 'media/v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: platform: fix cros-ec-cec build error media: staging/media/mt9t031/Kconfig: remove bogus entry media: i2c: mt9v111: Fix v4l2-ctrl error handling media: camss: add missing includes media: camss: Use managed memory allocations media: camss: mark PM functions as __maybe_unused media: af9035: prevent buffer overflow on write media: video_function_calls.rst: drop obsolete video-set-attributes reference | 24 September 2018, 13:16:41 UTC |
| 8604895 | Michael Bringmann | 20 September 2018, 16:45:13 UTC | powerpc/pseries: Fix unitialized timer reset on migration After migration of a powerpc LPAR, the kernel executes code to update the system state to reflect new platform characteristics. Such changes include modifications to device tree properties provided to the system by PHYP. Property notifications received by the post_mobility_fixup() code are passed along to the kernel in general through a call to of_update_property() which in turn passes such events back to all modules through entries like the '.notifier_call' function within the NUMA module. When the NUMA module updates its state, it resets its event timer. If this occurs after a previous call to stop_topology_update() or on a system without VPHN enabled, the code runs into an unitialized timer structure and crashes. This patch adds a safety check along this path toward the problem code. An example crash log is as follows. ibmvscsi 30000081: Re-enabling adapter! ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfsv3 nfs_acl nfs tcp_diag udp_diag inet_diag lockd unix_diag af_packet_diag netlink_diag grace fscache sunrpc xts vmx_crypto pseries_rng sg binfmt_misc ip_tables xfs libcrc32c sd_mod ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod CPU: 11 PID: 3067 Comm: drmgr Not tainted 4.17.0+ #179 ... NIP mod_timer+0x4c/0x400 LR reset_topology_timer+0x40/0x60 Call Trace: 0xc0000003f9407830 (unreliable) reset_topology_timer+0x40/0x60 dt_update_callback+0x100/0x120 notifier_call_chain+0x90/0x100 __blocking_notifier_call_chain+0x60/0x90 of_property_notify+0x90/0xd0 of_update_property+0x104/0x150 update_dt_property+0xdc/0x1f0 pseries_devicetree_update+0x2d0/0x510 post_mobility_fixup+0x7c/0xf0 migration_store+0xa4/0xc0 kobj_attr_store+0x30/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x16c/0x240 __vfs_write+0x40/0x200 vfs_write+0xc8/0x240 ksys_write+0x5c/0x100 system_call+0x58/0x6c Fixes: 5d88aa85c00b ("powerpc/pseries: Update CPU maps when device tree is updated") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 24 September 2018, 11:05:38 UTC |
| d26ed6b | Friedemann Gerold | 15 September 2018, 15:03:39 UTC | net: aquantia: memory corruption on jumbo frames This patch fixes skb_shared area, which will be corrupted upon reception of 4K jumbo packets. Originally build_skb usage purpose was to reuse page for skb to eliminate needs of extra fragments. But that logic does not take into account that skb_shared_info should be reserved at the end of skb data area. In case packet data consumes all the page (4K), skb_shinfo location overflows the page. As a consequence, __build_skb zeroed shinfo data above the allocated page, corrupting next page. The issue is rarely seen in real life because jumbo are normally larger than 4K and that causes another code path to trigger. But it 100% reproducible with simple scapy packet, like: sendp(IP(dst="192.168.100.3") / TCP(dport=443) \ / Raw(RandString(size=(4096-40))), iface="enp1s0") Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Friedemann Gerold <f.gerold@b-c-s.de> Reported-by: Michael Rauch <michael@rauch.be> Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 05:25:25 UTC |
| 841dfa4 | David S. Miller | 24 September 2018, 04:55:26 UTC | Merge branch 'netpoll-avoid-capture-effects-for-NAPI-drivers' Eric Dumazet says: ==================== netpoll: avoid capture effects for NAPI drivers As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture, showing one ksoftirqd eating all cycles can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller() : Most NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. This patch series take care of the first round, we will handle other drivers in future rounds. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:26 UTC |
| 765cdc2 | Eric Dumazet | 21 September 2018, 22:27:52 UTC | tun: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. tun uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 0825ce7 | Eric Dumazet | 21 September 2018, 22:27:51 UTC | nfp: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. nfp uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 58e0e22 | Eric Dumazet | 21 September 2018, 22:27:50 UTC | bnxt: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnxt uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| d8ea6a9 | Eric Dumazet | 21 September 2018, 22:27:49 UTC | bnx2x: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnx2x uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 9c29bcd | Eric Dumazet | 21 September 2018, 22:27:48 UTC | mlx5: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx5 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| a24b66c | Eric Dumazet | 21 September 2018, 22:27:47 UTC | mlx4: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx4 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 1aa28fb | Eric Dumazet | 21 September 2018, 22:27:46 UTC | i40evf: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. i40evf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 158a08a | Eric Dumazet | 21 September 2018, 22:27:45 UTC | ice: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ice uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:25 UTC |
| 0542997 | Eric Dumazet | 21 September 2018, 22:27:44 UTC | igb: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. igb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| 2753166 | Eric Dumazet | 21 September 2018, 22:27:43 UTC | ixgb: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. This also removes a problematic use of disable_irq() in a context it is forbidden, as explained in commit af3e0fcf7887 ("8139too: Use disable_irq_nosync() in rtl8139_poll_controller()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| dda9d57 | Eric Dumazet | 21 September 2018, 22:27:42 UTC | fm10k: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture lasts for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. fm10k uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| 6f5d941 | Eric Dumazet | 21 September 2018, 22:27:41 UTC | ixgbevf: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbevf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| b80e71a | Eric Dumazet | 21 September 2018, 22:27:40 UTC | ixgbe: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| 93f62ad | Eric Dumazet | 21 September 2018, 22:27:39 UTC | bonding: use netpoll_poll_dev() helper We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| ac3d9dd | Eric Dumazet | 21 September 2018, 22:27:38 UTC | netpoll: make ndo_poll_controller() optional As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller(). NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. This patch allows netpoll_poll_dev() to process NAPI contexts even for drivers not providing ndo_poll_controller(), allowing for following patches in NAPI drivers. Also we export netpoll_poll_dev() so that it can be called by bonding/team drivers in following patches. Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 September 2018, 04:55:24 UTC |
| 16fdf8b | David S. Miller | 23 September 2018, 19:25:15 UTC | rds: Fix build regression. Use DECLARE_* not DEFINE_* Fixes: 8360ed6745df ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats") Signed-off-by: David S. Miller <davem@davemloft.net> | 23 September 2018, 19:25:15 UTC |
| 6bf4ca7 | Greg Kroah-Hartman | 23 September 2018, 17:15:18 UTC | Linux 4.19-rc5 | 23 September 2018, 17:15:18 UTC |
| d02771f | Greg Kroah-Hartman | 23 September 2018, 15:19:27 UTC | Merge tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Lee writes: "MFD fixes for v4.19 - Fix Dialog DA9063 regulator constraints issue causing failure in probe - Fix OMAP Device Tree compatible strings to match DT" * tag 'mfd-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: omap-usb-host: Fix dts probe of children mfd: da9063: Fix DT probing with constraints | 23 September 2018, 15:19:27 UTC |
| 18d49ec | Greg Kroah-Hartman | 23 September 2018, 11:32:19 UTC | Merge tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Juergen writes: "xen: Two small fixes for xen drivers." * tag 'for-linus-4.19d-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: issue warning message when out of grant maptrack entries xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code | 23 September 2018, 11:32:19 UTC |
| a83f87c | Greg Kroah-Hartman | 23 September 2018, 06:33:28 UTC | Merge tag 'for-linus-20180922' of git://git.kernel.dk/linux-block Jens writes: "Just a single fix in this pull request, fixing a regression in /proc/diskstats caused by the unification of timestamps." * tag 'for-linus-20180922' of git://git.kernel.dk/linux-block: block: use nanosecond resolution for iostat | 23 September 2018, 06:33:28 UTC |
| 328c633 | Greg Kroah-Hartman | 23 September 2018, 06:10:12 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "A set of fixes for x86: - Resolve the kvmclock regression on AMD systems with memory encryption enabled. The rework of the kvmclock memory allocation during early boot results in encrypted storage, which is not shareable with the hypervisor. Create a new section for this data which is mapped unencrypted and take care that the later allocations for shared kvmclock memory is unencrypted as well. - Fix the build regression in the paravirt code introduced by the recent spectre v2 updates. - Ensure that the initial static page tables cover the fixmap space correctly so early console always works. This worked so far by chance, but recent modifications to the fixmap layout can - depending on kernel configuration - move the relevant entries to a different place which is not covered by the initial static page tables. - Address the regressions and issues which got introduced with the recent extensions to the Intel Recource Director Technology code. - Update maintainer entries to document reality" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Expand static page table for fixmap space MAINTAINERS: Add X86 MM entry x86/intel_rdt: Add Reinette as co-maintainer for RDT MAINTAINERS: Add Borislav to the x86 maintainers x86/paravirt: Fix some warning messages x86/intel_rdt: Fix incorrect loop end condition x86/intel_rdt: Fix exclusive mode handling of MBA resource x86/intel_rdt: Fix incorrect loop end condition x86/intel_rdt: Do not allow pseudo-locking of MBA resource x86/intel_rdt: Fix unchecked MSR access x86/intel_rdt: Fix invalid mode warning when multiple resources are managed x86/intel_rdt: Global closid helper to support future fixes x86/intel_rdt: Fix size reporting of MBA resource x86/intel_rdt: Fix data type in parsing callbacks x86/kvm: Use __bss_decrypted attribute in shared variables x86/mm: Add .bss..decrypted section to hold shared variables | 23 September 2018, 06:10:12 UTC |
| 52890d2 | Greg Kroah-Hartman | 23 September 2018, 06:09:16 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "- Provide a strerror_r wrapper so lib/bpf can be built on systems without _GNU_SOURCE - Unbreak the man page generator when building out of tree" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf Documentation: Fix out-of-tree asciidoctor man page generation tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systems | 23 September 2018, 06:09:16 UTC |
| ea09267 | Greg Kroah-Hartman | 23 September 2018, 06:06:54 UTC | Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Thomas writes: "Make the EFI arm stub device tree loader default on to unbreak existing EFI boot loaders which do not have DTB support." * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to y | 23 September 2018, 06:06:54 UTC |
| 474ff26 | Maciej Żenczykowski | 22 September 2018, 08:34:01 UTC | net-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN So it should not fail with EPERM even though it is no longer implemented... This is a fix for: (userns)$ egrep ^Cap /proc/self/status CapInh: 0000003fffffffff CapPrm: 0000003fffffffff CapEff: 0000003fffffffff CapBnd: 0000003fffffffff CapAmb: 0000003fffffffff (userns)$ tcpdump -i usb_rndis0 tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted Warning: Kernel filter failed: Bad file descriptor tcpdump: can't remove kernel filter: Bad file descriptor With this change it returns EOPNOTSUPP instead of EPERM. See also https://github.com/the-tcpdump-group/libpcap/issues/689 Fixes: 08a00fea6de2 "net: Remove references to NETIF_F_UFO from ethtool." Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 September 2018, 00:11:26 UTC |
| 41c9b1b | Dave Jiang | 10 September 2018, 23:18:29 UTC | device-dax: Add missing address_space_operations With address_space_operations missing for device dax, namely the .set_page_dirty, we hit a kernel warning when running destructive ndctl unit test: make TESTS=device-dax check WARNING: CPU: 3 PID: 7380 at fs/buffer.c:581 __set_page_dirty+0xb1/0xc0 Setting address_space_operations to noop_set_page_dirty and noop_invalidatepage for device dax to prevent fallback to __set_page_dirty_buffers() and block_invalidatepage() respectively. Fixes: 2232c6382a ("device-dax: Enable page_mapping()") Acked-by: Jeff Moyer <jmoyer@redhat.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 22 September 2018, 16:07:33 UTC |
| 8360ed6 | Nathan Chancellor | 21 September 2018, 18:04:51 UTC | RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats Clang warns when two declarations' section attributes don't match. net/rds/ib_stats.c:40:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:142:2: note: expanded from macro 'DEFINE_PER_CPU_SHARED_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ ^ ./include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ net/rds/ib.h:446:1: note: previous attribute is here DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ./include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ 1 warning generated. The initial definition was added in commit ec16227e1414 ("RDS/IB: Infiniband transport") and the cache aligned definition was added in commit e6babe4cc4ce ("RDS/IB: Stats and sysctls") right after. The definition probably should have been updated in net/rds/ib.h, which is what this patch does. Link: https://github.com/ClangBuiltLinux/linux/issues/114 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:44:07 UTC |
| b57e99b | Omar Sandoval | 21 September 2018, 23:44:34 UTC | block: use nanosecond resolution for iostat Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche <klaus.kusche@computerix.info> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 22 September 2018, 02:26:59 UTC |
| 8ac1ee6 | Nathan Chancellor | 21 September 2018, 09:44:12 UTC | net/mlx4: Use cpumask_available for eq->affinity_mask Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:20:22 UTC |
| 83fe9a9 | Dan Carpenter | 21 September 2018, 08:07:55 UTC | devlink: double free in devlink_resource_fill() Smatch reports that devlink_dpipe_send_and_alloc_skb() frees the skb on error so this is a double free. We fixed a bunch of these bugs in commit 7fe4d6dcbcb4 ("devlink: Remove redundant free on error path") but we accidentally overlooked this one. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:19:07 UTC |
| e6ce382 | YueHaibing | 21 September 2018, 03:46:37 UTC | net: apple: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:15 UTC |
| 648c361 | YueHaibing | 21 September 2018, 03:44:05 UTC | net: i825xx: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:15 UTC |
| f0f2551 | YueHaibing | 21 September 2018, 03:35:11 UTC | net: wiznet: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:15 UTC |
| 28d304e | YueHaibing | 21 September 2018, 03:05:50 UTC | net: sgi: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:14 UTC |
| f3bf939 | YueHaibing | 21 September 2018, 03:02:37 UTC | net: cirrus: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:14 UTC |
| 72b4627 | YueHaibing | 21 September 2018, 02:53:47 UTC | net: seeq: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:15:14 UTC |
| 54be5b8 | Wei Yongjun | 21 September 2018, 02:53:17 UTC | PCI: hv: Fix return value check in hv_pci_assign_slots() In case of error, the function pci_create_slot() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:13:22 UTC |
| 86f9bd1 | Jeff Barnhill | 21 September 2018, 00:45:27 UTC | net/ipv6: Display all addresses in output of /proc/net/if_inet6 The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 02:10:49 UTC |
| f88b4c0 | Sean Tranchetti | 20 September 2018, 20:29:45 UTC | netlabel: check for IPV4MASK in addrinfo_get netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 September 2018, 01:58:34 UTC |
| fad0c40 | Daniel Borkmann | 22 September 2018, 00:46:42 UTC | Merge branch 'bpf-sockmap-estab-fixes' John Fastabend says: ==================== Eric noted that using the close callback is not sufficient to catch all transitions from ESTABLISHED state to a LISTEN state. So this series does two things. First, only allow adding socks in ESTABLISH state and second use unhash callback to catch tcp_disconnect() transitions. v2: added check for ESTABLISH state in hash update sockmap as well v3: Do not release lock from unhash in error path, no lock was used in the first place. And drop not so useful code comments v4: convert, if (unhash()) return unhash(); return to if (unhash()) unhash(); return; Thanks for reviewing Yonghong I carried your ACKs forward. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 22 September 2018, 00:46:43 UTC |
| 5028027 | John Fastabend | 18 September 2018, 16:01:54 UTC | bpf: test_maps, only support ESTABLISHED socks Ensure that sockets added to a sock{map|hash} that is not in the ESTABLISHED state is rejected. Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 22 September 2018, 00:46:42 UTC |
| b05545e | John Fastabend | 18 September 2018, 16:01:49 UTC | bpf: sockmap, fix transition through disconnect without close It is possible (via shutdown()) for TCP socks to go trough TCP_CLOSE state via tcp_disconnect() without actually calling tcp_close which would then call our bpf_tcp_close() callback. Because of this a user could disconnect a socket then put it in a LISTEN state which would break our assumptions about sockets always being ESTABLISHED state. To resolve this rely on the unhash hook, which is called in the disconnect case, to remove the sock from the sockmap. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 22 September 2018, 00:46:41 UTC |
| 5607fff | John Fastabend | 18 September 2018, 16:01:44 UTC | bpf: sockmap only allow ESTABLISHED sock state After this patch we only allow socks that are in ESTABLISHED state or are being added via a sock_ops event that is transitioning into an ESTABLISHED state. By allowing sock_ops events we allow users to manage sockmaps directly from sock ops programs. The two supported sock_ops ops are BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB and BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB. Similar to TLS ULP this ensures sk_user_data is correct. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | 22 September 2018, 00:46:41 UTC |
| 10dc890 | Greg Kroah-Hartman | 21 September 2018, 18:01:16 UTC | Merge tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Linus writes: "Pin control fixes for v4.19: - Two fixes for the Intel pin controllers than cause problems on laptops." * tag 'pinctrl-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: Do pin translation in other GPIO operations as well pinctrl: cannonlake: Fix gpio base for GPP-E | 21 September 2018, 18:01:16 UTC |
| f1f1fad | Johannes Thumshirn | 21 September 2018, 07:01:01 UTC | scsi: sd: don't crash the host on invalid commands When sd_init_command() get's a command with a unknown req_op() it crashes the system via BUG(). This makes debugging the actual reason for the broken request cmd_flags pretty hard as the system is down before it's able to write out debugging data on the serial console or the trace buffer. Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and return an I/O error to the producer of the request. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 21 September 2018, 16:42:57 UTC |
| 318ddb3 | Wen Xiong | 21 September 2018, 00:32:12 UTC | scsi: ipr: System hung while dlpar adding primary ipr adapter back While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 21 September 2018, 16:35:39 UTC |
| 8c39e26 | Vincent Pelletier | 09 September 2018, 04:09:27 UTC | scsi: target: iscsi: Use bin2hex instead of a re-implementation Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 21 September 2018, 16:32:30 UTC |
| 1816494 | Vincent Pelletier | 09 September 2018, 04:09:26 UTC | scsi: target: iscsi: Use hex2bin instead of a re-implementation This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 21 September 2018, 16:31:13 UTC |
| 652ef42 | Antoine Tenart | 20 September 2018, 10:08:54 UTC | net: mscc: fix the frame extraction into the skb When extracting frames from the Ocelot switch, the frame check sequence (FCS) is present at the end of the data extracted. The FCS was put into the sk buffer which introduced some issues (as length related ones), as the FCS shouldn't be part of an Rx sk buffer. This patch fixes the Ocelot switch extraction behaviour by discarding the FCS. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 September 2018, 16:07:50 UTC |
| a27fb6d | Greg Kroah-Hartman | 21 September 2018, 14:21:42 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Paolo writes: "It's mostly small bugfixes and cleanups, mostly around x86 nested virtualization. One important change, not related to nested virtualization, is that the ability for the guest kernel to trap CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is now masked by default. This is because the feature is detected through an MSR; a very bad idea that Intel seems to like more and more. Some applications choke if the other fields of that MSR are not initialized as on real hardware, hence we have to disable the whole MSR by default, as was the case before Linux 4.12." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits) KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs kvm: selftests: Add platform_info_test KVM: x86: Control guest reads of MSR_PLATFORM_INFO KVM: x86: Turbo bits in MSR_PLATFORM_INFO nVMX x86: Check VPID value on vmentry of L2 guests nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2 KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv KVM: VMX: check nested state and CR4.VMXE against SMM kvm: x86: make kvm_{load|put}_guest_fpu() static x86/hyper-v: rename ipi_arg_{ex,non_ex} structures KVM: VMX: use preemption timer to force immediate VMExit KVM: VMX: modify preemption timer bit only when arming timer KVM: VMX: immediately mark preemption timer expired only for zero value KVM: SVM: Switch to bitmap_zalloc() KVM/MMU: Fix comment in walk_shadow_page_lockless_end() kvm: selftests: use -pthread instead of -lpthread KVM: x86: don't reset root in kvm_mmu_setup() kvm: mmu: Don't read PDPTEs when paging is not enabled x86/kvm/lapic: always disable MMIO interface in x2APIC mode KVM: s390: Make huge pages unavailable in ucontrol VMs ... | 21 September 2018, 14:21:42 UTC |
| 0eba869 | Greg Kroah-Hartman | 21 September 2018, 13:29:44 UTC | Merge tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs Richard writes: "This pull request contains fixes for UBIFS: - A wrong UBIFS assertion in mount code - Fix for a NULL pointer deref in mount code - Revert of a bad fix for xattrs" * tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs: Revert "ubifs: xattr: Don't operate on deleted inodes" ubifs: drop false positive assertion ubifs: Check for name being NULL while mounting | 21 September 2018, 13:29:44 UTC |
| 89578d0 | Alexandru Gheorghe | 22 August 2018, 15:18:19 UTC | drm/malidp: Fix writeback in NV12 When we want to writeback to memory in NV12 format we need to program the RGB2YUV coefficients. Currently, we don't program the coefficients and NV12 doesn't work at all. This patchset fixes that by programming a sane default(bt709, limited range) as rgb2yuv coefficients. In the long run, probably we need to think of a way for userspace to be able to program that, but for now I think this is better than not working at all or not advertising NV12 as a supported format for memwrite. Changes since v1: - Write the rgb2yuv coefficients only once, since we don't change them at all, just write them the first time NV12 is programmed, suggested by Brian Starkey, here [1] [1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> | 21 September 2018, 09:55:00 UTC |
| 69be198 | Alexandru Gheorghe | 16 July 2018, 10:07:07 UTC | drm: mali-dp: Call drm_crtc_vblank_reset on device init Currently, if userspace calls drm_wait_vblank before the crtc is activated the crtc vblank_enable hook is called, which in case of malidp driver triggers some warninngs. This happens because on device init we don't inform the drm core about the vblank state by calling drm_crtc_vblank_on/off/reset which together with drm_vblank_get have some magic that prevents calling drm_vblank_enable when crtc is off. Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> | 21 September 2018, 09:54:56 UTC |
