f085df1 | Linus Torvalds | 07 May 2023, 18:32:18 UTC | Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ... | 07 May 2023, 18:32:18 UTC |
17784de | Linus Torvalds | 07 May 2023, 18:04:26 UTC | Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again) | 07 May 2023, 18:04:26 UTC |
6f69c98 | Linus Torvalds | 07 May 2023, 17:57:14 UTC | Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs() | 07 May 2023, 17:57:14 UTC |
63342b1 | Linus Torvalds | 07 May 2023, 17:46:21 UTC | Merge tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts | 07 May 2023, 17:46:21 UTC |
d6b8a8c | Linus Torvalds | 07 May 2023, 17:31:45 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate" | 07 May 2023, 17:31:45 UTC |
1c1094e | Linus Torvalds | 07 May 2023, 17:17:33 UTC | Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel | 07 May 2023, 17:17:33 UTC |
03e5cb7 | Linus Torvalds | 07 May 2023, 17:00:09 UTC | Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages | 07 May 2023, 17:00:09 UTC |
9a2d517 | Arnaldo Carvalho de Melo | 06 May 2023, 21:07:37 UTC | Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 May 2023, 21:07:37 UTC |
c3e6df9 | Arnaldo Carvalho de Melo | 06 May 2023, 21:06:43 UTC | Revert "perf build: Warn for BPF skeletons if endian mismatches" This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 May 2023, 21:06:43 UTC |
fc4354c | Linus Torvalds | 06 May 2023, 18:43:08 UTC | Merge tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup"). [ The whole old series: def8574308ed..2d55c16c0c54 results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL | 06 May 2023, 18:43:08 UTC |
706ce3c | Linus Torvalds | 06 May 2023, 18:25:03 UTC | Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants | 06 May 2023, 18:25:03 UTC |
da9619a | Keith Busch | 26 January 2023, 21:51:24 UTC | dmapool: link blocks across pages The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:38 UTC |
8ecc369 | Keith Busch | 26 January 2023, 21:51:23 UTC | dmapool: don't memset on free twice If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:38 UTC |
cc66995 | Keith Busch | 26 January 2023, 21:51:22 UTC | dmapool: simplify freeing The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
f0bccea | Keith Busch | 26 January 2023, 21:51:21 UTC | dmapool: consolidate page initialization Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
5407df1 | Keith Busch | 26 January 2023, 21:51:20 UTC | dmapool: rearrange page alloc failure handling Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
d93e08b | Keith Busch | 26 January 2023, 21:51:19 UTC | dmapool: move debug code to own functions Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:37 UTC |
290911c | Tony Battersby | 26 January 2023, 21:51:18 UTC | dmapool: speedup DMAPOOL_DEBUG with init_on_alloc Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
7902335 | Tony Battersby | 26 January 2023, 21:51:17 UTC | dmapool: cleanup integer types To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
08cc96c | Tony Battersby | 26 January 2023, 21:51:16 UTC | dmapool: use sysfs_emit() instead of scnprintf() Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
67a540c | Tony Battersby | 26 January 2023, 21:51:15 UTC | dmapool: remove checks for dev == NULL dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:33:36 UTC |
994e241 | Linus Torvalds | 06 May 2023, 17:16:19 UTC | nfs: fix mis-merged __filemap_get_folio() error check Fix another case of an incorrect check for the returned 'folio' value from __filemap_get_folio(). The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio"). But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page array functions to use a folio") added a new user of that function. And my merge of the two did not fix this up correctly. The ext4 merge had the same issue, but that one had been caught in linux-next and got properly fixed while merging. Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 17:16:19 UTC |
58f5f66 | Christoph Hellwig | 03 May 2023, 15:45:26 UTC | afs: fix the afs_dir_get_folio return value Keep returning NULL on failure instead of letting an ERR_PTR escape to callers that don't expect it. Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:08 UTC |
28a65b4 | Ryusuke Konishi | 27 April 2023, 01:15:26 UTC | nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
d824ec2 | Jan Kara | 28 April 2023, 12:41:40 UTC | mm: do not reclaim private data from pinned page If the page is pinned, there's no point in trying to reclaim it. Furthermore if the page is from the page cache we don't want to reclaim fs-private data from the page because the pinning process may be writing to the page at any time and reclaiming fs private info on a dirty page can upset the filesystem (see link below). Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
a6a491c | Ryusuke Konishi | 30 April 2023, 19:30:46 UTC | nilfs2: fix infinite loop in nilfs_mdt_get_block() If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
29417d2 | Lorenzo Stoakes | 30 April 2023, 20:19:17 UTC | mm/mmap/vma_merge: always check invariants We may still have inconsistent input parameters even if we choose not to merge and the vma_merge() invariant checks are useful for checking this with no production runtime cost (these are only relevant when CONFIG_DEBUG_VM is specified). Therefore, perform these checks regardless of whether we merge. This is relevant, as a recent issue (addressed in commit "mm/mempolicy: Correctly update prev when policy is equal on mbind") in the mbind logic was only picked up in the 6.2.y stable branch where these assertions are performed prior to determining mergeability. Had this remained the same in mainline this issue may have been picked up faster, so moving forward let's always check them. Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 06 May 2023, 17:10:07 UTC |
38a55db | Matthew Wilcox | 06 May 2023, 16:04:14 UTC | filemap: Handle error return from __filemap_get_folio() Smatch reports that filemap_fault() was missed in the conversion of __filemap_get_folio() error returns from NULL to ERR_PTR. Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 17:08:59 UTC |
dd9e11d | Linus Torvalds | 06 May 2023, 15:37:28 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset() | 06 May 2023, 15:37:28 UTC |
a3b111b | Linus Torvalds | 06 May 2023, 15:28:58 UTC | Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors() | 06 May 2023, 15:28:58 UTC |
7644c82 | Linus Torvalds | 06 May 2023, 15:15:20 UTC | Merge tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux Pull nonblocking pipe io_uring support from Jens Axboe: "Here's the revised edition of the FMODE_NOWAIT support for pipes, in which we just flag it as such supporting FMODE_NOWAIT unconditionally, but clear it if we ever end up using splice/vmsplice on the pipe. The pipe read/write side is perfectly fine for nonblocking IO, however splice and vmsplice can potentially wait for IO with the pipe lock held" * tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux: pipe: set FMODE_NOWAIT on pipes splice: clear FMODE_NOWAIT on file if splice/vmsplice is used | 06 May 2023, 15:15:20 UTC |
0021b53 | Linus Torvalds | 06 May 2023, 15:07:11 UTC | Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for rc1. The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of it was merely a code shuffling. Another significant change here is for ALSA PCM core; it received a revert and a series of fixes for PCM auto-silencing where it caused a regression in the previous PR for rc1. Others are all small: ASoC Intel fixes, various quirks for ASoC AMD, HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and some documentation updates" * tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() ALSA: pcm: playback silence - move silence variable updates to separate function ALSA: pcm: playback silence - remove extra code ALSA: pcm: fix playback silence - correct incremental silencing ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init` ALSA: usb-audio: Add quirk for Pioneer DDJ-800 ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x ASoC: codecs: wcd938x: fix accessing regmap on unattached devices ALSA: docs: Fix code block indentation in ALSA driver example ALSA: docs: Extend module parameters description ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41 ALSA: emu10k1: use more existing defines instead of open-coded numbers ASoC: amd: yc: Add ASUS M3402RA into DMI table ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6 ... | 06 May 2023, 15:07:11 UTC |
27e0c84 | Linus Torvalds | 06 May 2023, 15:06:09 UTC | Merge tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A trivial typo fix that came in during the merge window" * tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: consumer.rst: fix 'regulator_enable' typo. | 06 May 2023, 15:06:09 UTC |
2e1e133 | Linus Torvalds | 06 May 2023, 02:16:58 UTC | Merge tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd Pull ksmbd server fixes from Steve French: "Ten ksmbd server fixes, including some important security fixes: - Two use after free fixes - Fix RCU callback race - Deadlock fix - Three patches to prevent session setup attacks - Prevent guest users from establishing multichannel sessions - Fix null pointer dereference in query FS info - Memleak fix" * tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd: ksmbd: call rcu_barrier() in ksmbd_server_exit() ksmbd: fix racy issue under cocurrent smb2 tree disconnect ksmbd: fix racy issue from smb2 close and logoff with multichannel ksmbd: not allow guest user on multichannel ksmbd: fix deadlock in ksmbd_find_crypto_ctx() ksmbd: block asynchronous requests when making a delay on session setup ksmbd: destroy expired sessions ksmbd: fix racy issue from session setup and logoff ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() ksmbd: fix memleak in session setup | 06 May 2023, 02:16:58 UTC |
ed23734 | Linus Torvalds | 06 May 2023, 02:12:01 UTC | Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ... | 06 May 2023, 02:12:01 UTC |
a5e2190 | Linus Torvalds | 06 May 2023, 02:07:17 UTC | Merge tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read | 06 May 2023, 02:07:17 UTC |
c12753d | Lukas Bulwahn | 05 May 2023, 22:39:09 UTC | s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDS Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 06 May 2023, 01:56:23 UTC |
6c73f81 | Ian Rogers | 05 May 2023, 20:41:19 UTC | perf metrics: Fix SEGV with --for-each-cgroup Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 22:18:55 UTC |
a887466 | Arnaldo Carvalho de Melo | 04 May 2023, 22:03:51 UTC | perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 22:18:39 UTC |
644bca1 | Jakub Kicinski | 05 May 2023, 20:35:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 05 May 2023, 20:35:45 UTC |
ecc68ee | Dmitrii Dolgov | 12 April 2023, 18:23:16 UTC | perf stat: Separate bperf from bpf_profiler It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 May 2023, 20:30:05 UTC |
418d5c9 | Linus Torvalds | 05 May 2023, 20:27:59 UTC | Merge tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro | 05 May 2023, 20:27:59 UTC |
647681b | Linus Torvalds | 05 May 2023, 20:16:42 UTC | Merge tag 'docs-6.4-2' of git://git.lwn.net/linux Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving documentation fixes, plus one Spanish translation that has been ready for some time but got applied late" * tag 'docs-6.4-2' of git://git.lwn.net/linux: docs/sp_SP: Add translation of process/adding-syscalls CREDITS: Update email address for Mat Martineau Documentation: update kernel stack for x86_64 docs: Remove unnecessary unicode character docs: fix "Reviewd" typo Documentation: timers: hrtimers: Make hybrid union historical docs/admin-guide/mm/ksm.rst fix intraface -> interface typo doc:it_IT: fix some typos | 05 May 2023, 20:16:42 UTC |
e919a3f | Linus Torvalds | 05 May 2023, 20:11:02 UTC | Merge tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing updates from Steven Rostedt: - Make buffer_percent read/write. The buffer_percent file is how users can state how long to block on the tracing buffer depending on how much is in the buffer. When it hits the "buffer_percent" it will wake the task waiting on the buffer. For some reason it was set to read-only. This was not noticed because testing was done as root without SELinux, but with SELinux it will prevent even root to write to it without having CAP_DAC_OVERRIDE. - The "touched_functions" was added this merge window, but one of the reasons for adding it was not implemented. That was to show what functions were not only touched, but had either a direct trampoline attached to it, or a kprobe or live kernel patching that can "hijack" the function to run a different function. The point is to know if there's functions in the kernel that may not be behaving as the kernel code shows. This can be used for debugging. TODO: Add this information to kernel oops too. * tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached tracing: Fix permissions for the buffer_percent file | 05 May 2023, 20:11:02 UTC |
b115d85 | Linus Torvalds | 05 May 2023, 19:56:55 UTC | Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Introduce local{,64}_try_cmpxchg() - a slightly more optimal primitive, which will be used in perf events ring-buffer code - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation - Misc cleanups/fixes * tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: Correct (cmp)xchg() instrumentation locking/x86: Define arch_try_cmpxchg_local() locking/arch: Wire up local_try_cmpxchg() locking/generic: Wire up local{,64}_try_cmpxchg() locking/atomic: Add generic try_cmpxchg{,64}_local() support locking/rwbase: Mitigate indefinite writer starvation locking/arch: Rename all internal __xchg() names to __arch_xchg() | 05 May 2023, 19:56:55 UTC |
d5ed10b | Linus Torvalds | 05 May 2023, 19:29:57 UTC | Merge branch 'x86-uaccess-cleanup': x86 uaccess header cleanups Merge my x86 uaccess updates branch. The LAM ("Linear Address Masking") updates in this release made me unhappy about how "access_ok()" was done, and it actually turned out to have a couple of small bugs in it too. This is my cleanup of the code: - use the sign bit of the __user pointer rather than masking the address and checking it against the TASK_SIZE range. We already did this part for the get/put_user() side, but 'access_ok()' did the naïve "mask and range check" thing, which not only generates nasty code, but also ended up meaning that __access_ok itself didn't do a good job, and so copy_from_user_nmi() didn't get the check right. - move all the code that is 64-bit only into the 64-bit version of the header file, so that we don't unnecessarily pollute the shared x86 code and make it look like LAM might work in 32-bit too. - fix a bug in the address masking (that doesn't end up mattering: in this case the fix was to just remove the buggy code entirely). - a couple of trivial cleanups and added commentary about the access_ok() rules. * x86-uaccess-cleanup: x86-64: mm: clarify the 'positive addresses' user address rules x86: mm: remove 'sign' games from LAM untagged_addr*() macros x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header x86: mm: remove architecture-specific 'access_ok()' define x86-64: make access_ok() independent of LAM | 05 May 2023, 19:29:57 UTC |
982365a | Linus Torvalds | 05 May 2023, 19:23:33 UTC | Merge tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function | 05 May 2023, 19:23:33 UTC |
493804a | Linus Torvalds | 05 May 2023, 19:17:01 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more kvm updates from Paolo Bonzini: "This includes the 6.4 changes for RISC-V, and a few bugfix patches for other architectures. For x86, this closes a longstanding performance issue in the newer and (usually) more scalable page table management code. RISC-V: - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization x86: - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). s390: - A couple of bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix race in gmap_make_secure() KVM: s390: pv: fix asynchronous teardown for small VMs KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated RISC-V: KVM: Virtualize per-HART AIA CSRs RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask RISC-V: KVM: Add ONE_REG interface for AIA CSRs RISC-V: KVM: Implement subtype for CSR ONE_REG interface RISC-V: KVM: Initial skeletal support for AIA RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines RISC-V: Detect AIA CSRs from ISA string RISC-V: Add AIA related CSR defines RISC-V: KVM: Allow Zbb extension for Guest/VM RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions RISC-V: KVM: Alphabetize selects KVM: RISC-V: Retry fault if vma_lookup() results become invalid | 05 May 2023, 19:17:01 UTC |
7163a21 | Linus Torvalds | 05 May 2023, 19:10:09 UTC | Merge tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530 | 05 May 2023, 19:10:09 UTC |
817e1af | Linus Torvalds | 05 May 2023, 19:05:00 UTC | Merge tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue | 05 May 2023, 19:05:00 UTC |
b49178e | Linus Torvalds | 05 May 2023, 18:57:29 UTC | Merge tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc | 05 May 2023, 18:57:29 UTC |
084f51d | Linus Torvalds | 05 May 2023, 18:49:22 UTC | Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ... | 05 May 2023, 18:49:22 UTC |
ee2dd70 | Oswald Buddenhagen | 05 May 2023, 15:52:44 UTC | ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence() We already know that `frames` is greater than zero, because we just checked it. So we don't need to check the loop condition on the first iteration. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-7-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:53 UTC |
6ffa6f3 | Oswald Buddenhagen | 05 May 2023, 15:52:43 UTC | ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence() Inline the remaining call of snd_pcm_playback_hw_avail(). This makes the top-up branch more congruent with the thresholded one, and allows simplifying the handling of the corner cases. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-6-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:52 UTC |
6d8d56d | Jaroslav Kysela | 05 May 2023, 15:52:42 UTC | ALSA: pcm: playback silence - move silence variable updates to separate function The code tracking the added samples in thresholded mode and the code tracking the just played samples in top-up mode are semantically identical, so factor it out to a common function to enhance readability. Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-5-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:52 UTC |
190cb66 | Jaroslav Kysela | 05 May 2023, 15:52:41 UTC | ALSA: pcm: playback silence - remove extra code The removed condition handles de facto only one situation where runtime->silence_filled variable is equal to runtime->buffer_size, because this variable cannot go over the buffer size. This case is implicitly caught by the required comparison of the noise distance with the threshold. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-4-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:51 UTC |
781b4da | Jaroslav Kysela | 05 May 2023, 15:52:40 UTC | ALSA: pcm: fix playback silence - correct incremental silencing Commit 9a826ddba6e ("[ALSA] pcm core: fix silence_start calculations") came with exactly the right commit message, but the patch just made things broken in a different way: We'd fill at a too low address if the area was already partially zeroed, so we'd under-fill. This affected both thresholded mode (where it was somewhat less likely) and top-up mode (where it would be the case consistently). Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-3-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:50 UTC |
2fbaa44 | Jaroslav Kysela | 05 May 2023, 15:52:39 UTC | ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode The snd_pcm_playback_hw_avail() function uses runtime->status->hw_ptr. Unfortunately, in case when we call this function from snd_pcm_update_hw_ptr0(), this variable contains the previous hardware pointer. Use the new_hw_ptr argument to calculate hw_avail (filled samples by the user space) to correct the threshold comparison. The new_hw_ptr argument may also be set to ULONG_MAX which means the initialization phase. In this case, use runtime->status->hw_ptr. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:49 UTC |
d7f5dd9 | Jaroslav Kysela | 05 May 2023, 15:52:38 UTC | ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()" This reverts commit 9f656705c5faa18afb26d922cfc64f9fd103c38d. There was a regression (in the top-up mode). Unfortunately, the patch provided from the author of this commit is not easy to review. Keep the updated and new comments in headers. Also add a new comment that documents the missed API constraint which led to the regression. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Link: https://lore.kernel.org/r/CAAJw_ZsbTVd3Es373x_wTNDF7RknGhCD0r+NKUSwAO7HpLAkYA@mail.gmail.com Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 16:23:48 UTC |
56fc217 | Kai-Heng Feng | 05 May 2023, 12:59:23 UTC | ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop There's another laptop that needs the fixup to enable mute and micmute LEDs. So do it accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 May 2023, 15:12:28 UTC |
4a22488 | Takashi Iwai | 05 May 2023, 15:11:08 UTC | Merge tag 'asoc-fix-v6.4-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A small set of fixes and device quirks that have come in during the merge window, the Qualcomm fix seems quite large but it's mainly code motion so looks larger than it is. | 05 May 2023, 15:11:08 UTC |
6ce2c04 | Steven Rostedt (Google) | 03 May 2023, 01:32:33 UTC | ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached If a function had ever had IPMODIFY or DIRECT attached to it, where this is how live kernel patching and BPF overrides work, mark them and display an "M" in the enabled_functions and touched_functions files. This can be used for debugging. If a function had been modified and later there's a bug in the code related to that function, this can be used to know if the cause is possibly from a live kernel patch or a BPF program that changed the behavior of the code. Also update the documentation on the enabled_functions and touched_functions output, as it was missing direct callers and CALL_OPS. And include this new modify attribute. Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> | 05 May 2023, 15:09:25 UTC |
2492ba4 | Lukas Bulwahn | 05 May 2023, 04:36:05 UTC | MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER Commit 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") removes the driver drivers/thermal/intel/intel_menlow.c, but misses to remove its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS. Fixes: 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 05 May 2023, 14:10:12 UTC |
6997f84 | Conor Dooley | 04 May 2023, 21:58:39 UTC | MAINTAINERS: add Conor as a dt-bindings maintainer Rob asked if I would be interested in helping with the dt-bindings maintenance, and since I am a glutton for punishment I accepted. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spud Signed-off-by: Rob Herring <robh@kernel.org> | 05 May 2023, 12:45:17 UTC |
7a8016d | Paolo Bonzini | 05 May 2023, 10:15:09 UTC | Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD For 6.4 | 05 May 2023, 10:15:09 UTC |
29b38e7 | Paolo Bonzini | 05 May 2023, 10:12:36 UTC | Merge tag 'kvm-x86-mmu-6.4-2' of https://github.com/kvm-x86/linux into HEAD Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). | 05 May 2023, 10:12:36 UTC |
d4fba4d | Paolo Bonzini | 05 May 2023, 10:11:48 UTC | Merge tag 'kvm-riscv-6.4-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.4 - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization | 05 May 2023, 10:11:48 UTC |
9ee0487 | Yang Li | 05 May 2023, 00:49:25 UTC | cifs: Remove unneeded semicolon ./fs/cifs/smb2pdu.c:4140:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4863 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 05 May 2023, 09:29:58 UTC |
93e0401 | Florian Fainelli | 04 May 2023, 23:07:27 UTC | net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:03:56 UTC |
1e76f42 | Shannon Nelson | 04 May 2023, 20:44:59 UTC | pds_core: fix mutex double unlock in error path Fix a double unlock in an error handling path by unlocking as soon as the error is seen and removing unlocks in the error cleanup path. Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/ Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:02:47 UTC |
1a30449 | David S. Miller | 05 May 2023, 09:01:31 UTC | Merge branch 'tc-action-fixes' Vlad Buslov says: ==================== Fixes for miss to tc action series Changes V1 -> V2: - Added new patch reverting Ivan's fix for the same issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:01:31 UTC |
fd741f0 | Vlad Buslov | 04 May 2023, 18:16:16 UTC | net/sched: flower: fix error handler on replace When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of new filter to idr is postponed until later in code since handle is already provided by the user. However, the error handling code in fl_change() always assumes that the new filter had been inserted into idr. If error handler is reached when replacing existing filter it may remove it from idr therefore making it unreachable for delete or dump afterwards. Fix the issue by verifying that 'fold' argument wasn't provided by caller before calling idr_remove(). Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:01:31 UTC |
5110f3f | Vlad Buslov | 04 May 2023, 18:16:15 UTC | Revert "net/sched: flower: Fix wrong handle assignment during filter change" This reverts commit 32eff6bacec2cb574677c15378169a9fa30043ef. Superseded by the following commit in this series. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:01:31 UTC |
dd4f6bb | Vlad Buslov | 04 May 2023, 18:16:14 UTC | net/sched: flower: fix filter idr initialization The cited commit moved idr initialization too early in fl_change() which allows concurrent users to access the filter that is still being initialized and is in inconsistent state, which, in turn, can cause NULL pointer dereference [0]. Since there is no obvious way to fix the ordering without reverting the whole cited commit, alternative approach taken to first insert NULL pointer into idr in order to allocate the handle but still cause fl_get() to return NULL and prevent concurrent users from seeing the filter while providing miss-to-action infrastructure with valid handle id early in fl_change(). [ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN [ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5 [ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower] [ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57 [ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246 [ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900 [ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240 [ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900 [ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738 [ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000 [ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0 [ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 152.453588] Call Trace: [ 152.454032] <TASK> [ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0 [ 152.455109] ? sock_sendmsg+0xc5/0x190 [ 152.455689] ? ____sys_sendmsg+0x535/0x6b0 [ 152.456320] ? ___sys_sendmsg+0xeb/0x170 [ 152.456916] ? do_syscall_64+0x3d/0x90 [ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.458321] ? ___sys_sendmsg+0xeb/0x170 [ 152.458958] ? __sys_sendmsg+0xb5/0x140 [ 152.459564] ? do_syscall_64+0x3d/0x90 [ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower] [ 152.461710] ? _raw_spin_lock+0x7a/0xd0 [ 152.462299] ? _raw_read_lock_irq+0x30/0x30 [ 152.462924] ? nla_put+0x15e/0x1c0 [ 152.463480] fl_dump+0x228/0x650 [cls_flower] [ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower] [ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330 [ 152.465592] ? nla_put+0x15e/0x1c0 [ 152.466160] tcf_fill_node+0x515/0x9a0 [ 152.466766] ? tc_setup_offload_action+0xf0/0xf0 [ 152.467463] ? __alloc_skb+0x13c/0x2a0 [ 152.468067] ? __build_skb_around+0x330/0x330 [ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower] [ 152.469503] tc_del_tfilter+0x718/0x1330 [ 152.470115] ? is_bpf_text_address+0xa/0x20 [ 152.470765] ? tc_ctl_chain+0xee0/0xee0 [ 152.471335] ? __kernel_text_address+0xe/0x30 [ 152.471948] ? unwind_get_return_address+0x56/0xa0 [ 152.472639] ? __thaw_task+0x150/0x150 [ 152.473218] ? arch_stack_walk+0x98/0xf0 [ 152.473839] ? __stack_depot_save+0x35/0x4c0 [ 152.474501] ? stack_trace_save+0x91/0xc0 [ 152.475119] ? security_capable+0x51/0x90 [ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0 [ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 152.477042] ? __sys_sendmsg+0xb5/0x140 [ 152.477664] ? do_syscall_64+0x3d/0x90 [ 152.478255] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.479010] ? __stack_depot_save+0x35/0x4c0 [ 152.479679] ? __stack_depot_save+0x35/0x4c0 [ 152.480346] netlink_rcv_skb+0x12c/0x360 [ 152.480929] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 152.481517] ? do_syscall_64+0x3d/0x90 [ 152.482061] ? netlink_ack+0x1550/0x1550 [ 152.482612] ? rhashtable_walk_peek+0x170/0x170 [ 152.483262] ? kmem_cache_alloc_node+0x1af/0x390 [ 152.483875] ? _copy_from_iter+0x3d6/0xc70 [ 152.484528] netlink_unicast+0x553/0x790 [ 152.485168] ? netlink_attachskb+0x6a0/0x6a0 [ 152.485848] ? unwind_next_frame+0x11cc/0x1a10 [ 152.486538] ? arch_stack_walk+0x61/0xf0 [ 152.487169] netlink_sendmsg+0x7a1/0xcb0 [ 152.487799] ? netlink_unicast+0x790/0x790 [ 152.488355] ? iovec_from_user.part.0+0x4d/0x220 [ 152.488990] ? _raw_spin_lock+0x7a/0xd0 [ 152.489598] ? netlink_unicast+0x790/0x790 [ 152.490236] sock_sendmsg+0xc5/0x190 [ 152.490796] ____sys_sendmsg+0x535/0x6b0 [ 152.491394] ? import_iovec+0x7/0x10 [ 152.491964] ? kernel_sendmsg+0x30/0x30 [ 152.492561] ? __copy_msghdr+0x3c0/0x3c0 [ 152.493160] ? do_syscall_64+0x3d/0x90 [ 152.493706] ___sys_sendmsg+0xeb/0x170 [ 152.494283] ? may_open_dev+0xd0/0xd0 [ 152.494858] ? copy_msghdr_from_user+0x110/0x110 [ 152.495541] ? __handle_mm_fault+0x2678/0x4ad0 [ 152.496205] ? copy_page_range+0x2360/0x2360 [ 152.496862] ? __fget_light+0x57/0x520 [ 152.497449] ? mas_find+0x1c0/0x1c0 [ 152.498026] ? sockfd_lookup_light+0x1a/0x140 [ 152.498703] __sys_sendmsg+0xb5/0x140 [ 152.499306] ? __sys_sendmsg_sock+0x20/0x20 [ 152.499951] ? do_user_addr_fault+0x369/0xd80 [ 152.500595] do_syscall_64+0x3d/0x90 [ 152.501185] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 152.501917] RIP: 0033:0x7f5eb294f887 [ 152.502494] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 152.505008] RSP: 002b:00007ffd2c708f78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 152.506152] RAX: ffffffffffffffda RBX: 00000000642d9472 RCX: 00007f5eb294f887 [ 152.507134] RDX: 0000000000000000 RSI: 00007ffd2c708fe0 RDI: 0000000000000003 [ 152.508113] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 152.509119] R10: 00007f5eb2808708 R11: 0000000000000246 R12: 0000000000000001 [ 152.510068] R13: 0000000000000000 R14: 00007ffd2c70d1b8 R15: 0000000000485400 [ 152.511031] </TASK> [ 152.511444] Modules linked in: cls_flower sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] [ 152.515720] ---[ end trace 0000000000000000 ]--- Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 09:01:31 UTC |
26312c6 | Shenwei Wang | 04 May 2023, 15:35:17 UTC | net: fec: correct the counting of XDP sent frames In the current xdp_xmit implementation, if any single frame fails to transmit due to insufficient buffer descriptors, the function nevertheless reports success in sending all frames. This results in erroneously indicating that frames were transmitted when in fact they were dropped. This patch fixes the issue by ensureing the return value properly indicates the actual number of frames successfully transmitted, rather than potentially reporting success for all frames when some could not transmit. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Gagandeep Singh <g.singh@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:58:06 UTC |
cb9e6e5 | Lorenzo Bianconi | 04 May 2023, 09:52:49 UTC | bonding: add xdp_features support Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jussi Maki <joamaki@gmail.com> Tested-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:34:23 UTC |
299efdc | Wei Fang | 04 May 2023, 08:03:59 UTC | net: enetc: check the index of the SFI rather than the handle We should check whether the current SFI (Stream Filter Instance) table is full before creating a new SFI entry. However, the previous logic checks the handle by mistake and might lead to unpredictable behavior. Fixes: 888ae5a3952b ("net: enetc: add tc flower psfp offload driver") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:32:36 UTC |
c00ce54 | Martin Habets | 04 May 2023, 07:28:01 UTC | sfc: Add back mailing list We used to have a mailing list in the MAINTAINERS file, but removed this when we became part of Xilinx as it stopped working. Now inside AMD we have the list again. Add it back so patches will be seen by all sfc developers. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:31:45 UTC |
f8bb510 | Wenliang Wang | 04 May 2023, 02:27:06 UTC | virtio_net: suppress cpu stall when free_unused_bufs For multi-queue and large ring-size use case, the following error occurred when free_unused_bufs: rcu: INFO: rcu_sched self-detected stall on CPU. Fixes: 986a4f4d452d ("virtio_net: multiqueue support") Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:30:28 UTC |
9f699b7 | Michal Swiatkowski | 03 May 2023, 15:39:35 UTC | ice: block LAN in case of VF to VF offload VF to VF traffic shouldn't go outside. To enforce it, set only the loopback enable bit in case of all ingress type rules added via the tc tool. Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:29:21 UTC |
120a56b | Arınç ÜNAL | 02 May 2023, 21:09:47 UTC | net: dsa: mt7530: fix network connectivity with multiple CPU ports On mt753x_cpu_port_enable() there's code that enables flooding for the CPU port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports are enabled, port 6 becomes the only port to forward the frames to. But port 5 is the active port, so no frames received from the user ports will be forwarded to port 5 which breaks network connectivity. Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix this issue by setting the bit that corresponds to the CPU port without overwriting the other bits. Clear the bits beforehand only for the MT7531 switch. According to the documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and UNU_FFP bits are set to 1 for MT7531, 0 for MT7530. The commit 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") silently changed the method to set the bits on the MT7530_MFC. Instead of clearing the relevant bits before mt7530_cpu_port_enable() which runs under a for loop, the commit started doing it on mt7530_cpu_port_enable(). Back then, this didn't really matter as only a single CPU port could be used since the CPU port number was hardcoded. The driver was later changed with commit 1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant") to retrieve the CPU port via dp->cpu_dp. With that, this silent change became an issue for when using multiple CPU ports. Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:22:04 UTC |
37c218d | Arınç ÜNAL | 02 May 2023, 21:09:46 UTC | net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 May 2023, 08:22:04 UTC |
78b421b | Linus Torvalds | 05 May 2023, 01:33:56 UTC | Merge tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add watchdog driver for StarFive JH7100 and JH7110 Soc - Add Rockchip RK3588 devices - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices - Add Mediatke MT8365 and MT6735 devices - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog - Convert watchdog platform drivers to return void on the remove callback - Convert to devm_clk_get_enabled() helpers - ... and other small fixes and improvements * tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits) watchdog: dw_wdt: Simplify clk management watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe() watchdog: starfive: Fix the warning of starfive_wdt_match watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled MAINTAINERS: Add fragment for Xilinx watchdog driver watchdog: menz069_wdt: fix timeout setting watchdog: menz069_wdt: fix watchdog initialisation dt-bindings: watchdog: alphascale-asm9260: convert to DT schema watchdog: loongson1_wdt: Implement restart handler dt-bindings: watchdog: Document Qualcomm SM6115 watchdog dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: arm,sp805: drop unneeded minItems dt-bindings: watchdog: drop duplicated GPIO watchdog bindings dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT drivers: watchdog: Add StarFive Watchdog driver dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110 dt-bindings: watchdog: indentation, quotes and white-space cleanup watchdog: ebc-c384_wdt: Mark status as orphaned ... | 05 May 2023, 01:33:56 UTC |
1bef84a | Dave Airlie | 05 May 2023, 01:27:25 UTC | Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Add missing GPU transcoder masks for MTL and fix DSI power on sequence for Nextbook Ares 8A. Fix GuC version corner case. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com | 05 May 2023, 01:27:26 UTC |
f4c41a7 | Dave Airlie | 05 May 2023, 01:27:08 UTC | Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-05-03: amdgpu: - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com | 05 May 2023, 01:27:09 UTC |
fa0d9c0 | Dave Airlie | 05 May 2023, 01:23:11 UTC | Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next One cc stable for pipe source size check on SKL+ Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com | 05 May 2023, 01:23:12 UTC |
6f5a5e8 | Dave Airlie | 04 May 2023, 23:13:21 UTC | Merge tag 'amd-drm-fixes-6.4-2023-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-04-26: amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com | 04 May 2023, 23:13:22 UTC |
4d276e4 | Conor Dooley | 04 April 2023, 18:03:22 UTC | dt-bindings: perf: riscv,pmu: fix property dependencies Seemingly I mis-implemented the dependencies here. The OpenSBI docs only point out that the "riscv,event-to-mhpmcounters property is mandatory if riscv,event-to-mhpmevent is present". It never claims that riscv,event-to-mhpmcounters requires riscv,event-to-mhpmevent. Drop the dependency of riscv,event-to-mhpmcounters on riscv,event-to-mhpmevent. Fixes: 7e38085d9c59 ("dt-bindings: riscv: add SBI PMU event mappings") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20230404-tractor-confusing-8852e552539a@spud Signed-off-by: Rob Herring <robh@kernel.org> | 04 May 2023, 21:54:49 UTC |
8e35541 | Paulo Alcantara | 24 April 2023, 02:26:51 UTC | cifs: fix sharing of DFS connections When matching DFS connections, we can't rely on the values set in cifs_sb_info::prepath and cifs_tcon::tree_name as they might change during DFS failover. The DFS referrals related to a specific DFS tcon are already matched earlier in match_server(), therefore we can safely skip those checks altogether as the connection is guaranteed to be unique for the DFS tcon. Besides, when creating or finding an SMB session, make sure to also refcount any DFS root session related to it (cifs_ses::dfs_root_ses), so if a new DFS mount ends up reusing the connection from the old mount while there was an umount(2) still in progress (e.g. umount(2) -> cifs_umount() -> reconnect -> cifs_put_tcon()), the connection could potentially be put right after the umount(2) finished. Patch has minor update to include fix for unused variable issue noted by the kernel test robot Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305041040.j7W2xQSy-lkp@intel.com/ Cc: stable@vger.kernel.org # v6.2+ Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 04 May 2023, 21:54:44 UTC |
3c4aa44 | Linus Torvalds | 04 May 2023, 21:48:02 UTC | Merge tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "A few filesystem improvements, with a rather nasty use-after-free fix from Xiubo intended for stable" * tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client: ceph: reorder fields in 'struct ceph_snapid_map' ceph: pass ino# instead of old_dentry if it's disconnected ceph: fix potential use-after-free bug when trimming caps ceph: implement writeback livelock avoidance using page tagging ceph: do not print the whole xattr value if it's too long | 04 May 2023, 21:48:02 UTC |
8e15605 | Linus Torvalds | 04 May 2023, 21:37:53 UTC | Merge tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: "This includes a number of patches that didn't quite make the cut last merge window while we addressed some outstanding issues and review comments. It includes some new caching modes for those that only want readahead caches and reworks how we do writeback caching so we are not keeping extra references around which both causes performance problems and uses lots of additional resources on the server. It also includes a new flag to force disabling of xattrs which can also cause major performance issues, particularly if the underlying filesystem on the server doesn't support them. Finally it adds a couple of additional mount options to better support directio and enabling caches when the server doesn't support qid.version. There was one late-breaking bug report that has also been included as its own patch where I forgot to propagate an embarassing bit-logic fix to the various variations of open" * tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Fix bit operation logic error fs/9p: Rework cache modes and add new options to Documentation fs/9p: remove writeback fid and fix per-file modes fs/9p: Add new mount modes 9p: Add additional debug flags and open modes fs/9p: allow disable of xattr support on mount fs/9p: Remove unnecessary superblock flags fs/9p: Consolidate file operations and add readahead and writeback | 04 May 2023, 21:37:53 UTC |
d7385ba | Jason Andryuk | 04 May 2023, 19:47:23 UTC | 9p: Remove INET dependency 9pfs can run over assorted transports, so it doesn't have an INET dependency. Drop it and remove the includes of linux/inet.h. NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over plain file descriptors. However, tcp and unix functionality is still built and would generate runtime failures if used. Add imply INET and UNIX to NET_9P_FD, so functionality is enabled by default but can still be explicitly disabled. This allows configuring 9pfs over Xen with INET and UNIX disabled. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 04 May 2023, 20:46:57 UTC |
a1fd058 | Linus Torvalds | 04 May 2023, 20:21:16 UTC | Merge tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hitfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two for this -rc cycle" * tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: change per-VMA lock statistics to be disabled by default MAINTAINERS: update Michal Simek's email mm/mempolicy: correctly update prev when policy is equal on mbind relayfs: fix out-of-bounds access in relay_file_read kasan: hw_tags: avoid invalid virt_to_page() | 04 May 2023, 20:21:16 UTC |
37f225e | Michal Simek | 03 May 2023, 08:40:55 UTC | dt-bindings: xilinx: Remove Naga from memory and mtd bindings Naga is no longer works for AMD/Xilinx and there is no activity from him to continue to maintain Xilinx related drivers. Two drivers have Miquel as maintainer and for the last one add myself instead to be kept in a loop if there is any change required. Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/6b4cdc7158599b4a38409a03eda56e38975b6233.1683103250.git.michal.simek@amd.com Signed-off-by: Rob Herring <robh@kernel.org> | 04 May 2023, 20:13:12 UTC |
15fb96a | Linus Torvalds | 04 May 2023, 20:09:43 UTC | Merge tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout() | 04 May 2023, 20:09:43 UTC |
671e148 | Linus Torvalds | 04 May 2023, 19:45:32 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A few arm64 fixes that came in during the merge window for -rc1. The main thing is restoring the pointer authentication hwcaps, which disappeared during some recent refactoring - Fix regression in CPU erratum workaround when disabling the MMU - Fix detection of pointer authentication hwcaps - Avoid writeable, executable ELF sections in vmlinux" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: lds: move .got section out of .text arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text arm64: cpufeature: Fix pointer auth hwcaps arm64: Fix label placement in record_mmu_state() | 04 May 2023, 19:45:32 UTC |
611c9d8 | Linus Torvalds | 04 May 2023, 19:40:16 UTC | Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Better backtraces for humanization - Relay BCE exceptions to userland as SIGSEGV - Provide kernel fpu functions - Optimize memory ops (memset/memcpy/memmove) - Optimize checksum and crc32(c) calculation - Add ARCH_HAS_FORTIFY_SOURCE selection - Add function error injection support - Add ftrace with direct call support - Add basic perf tools support * tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) tools/perf: Add basic support for LoongArch LoongArch: ftrace: Add direct call trampoline samples support LoongArch: ftrace: Add direct call support LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses LoongArch: Add support for function error injection LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection LoongArch: crypto: Add crc32 and crc32c hw acceleration LoongArch: Add checksum optimization for 64-bit system LoongArch: Optimize memory ops (memset/memcpy/memmove) LoongArch: Provide kernel fpu functions LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs() LoongArch: Humanize the ESTAT line when showing registers LoongArch: Humanize the ECFG line when showing registers LoongArch: Humanize the EUEN line when showing registers LoongArch: Humanize the PRMD line when showing registers LoongArch: Humanize the CRMD line when showing registers LoongArch: Fix format of CSR lines during show_regs() ... | 04 May 2023, 19:40:16 UTC |
a1f749d | Linus Torvalds | 04 May 2023, 19:25:05 UTC | Merge tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux Pull arch/csky updates from Guo Ren: - Remove CPU_TLB_SIZE config - Prevent spurious page faults * tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux: csky: mmu: Prevent spurious page faults csky: remove obsolete config CPU_TLB_SIZE | 04 May 2023, 19:25:05 UTC |
b5d68f8 | Srinivas Pandruvada | 03 May 2023, 23:38:50 UTC | thermal: intel: powerclamp: Fix NULL pointer access issue If cur_state for the powerclamp cooling device is set to the default minimum state of 0, without setting first to cur_state > 0, this results in NULL pointer access. This NULL pointer access happens in the powercap core idle-inject function idle_inject_set_duration() as there is no NULL check for idle_inject_device pointer. This pointer must be allocated by calling idle_inject_register() or idle_inject_register_full(). In the function powerclamp_set_cur_state(), idle_inject_device pointer is allocated only when the cur_state > 0. But setting 0 without changing to any other state, idle_inject_set_duration() will be called with a NULL idle_inject_device pointer. To address this, just return from powerclamp_set_cur_state() if the current cooling device state is the same as the last one. Since the power-up default cooling device state is 0, changing the state to 0 again here will return without calling idle_inject_set_duration(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386 Tested-by: Risto A. Paju <teknohog@iki.fi> Cc: 6.3+ <stable@kernel.org> # 6.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 04 May 2023, 18:30:18 UTC |
3db6662 | Hans de Goede | 28 April 2023, 13:23:50 UTC | ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530 Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530. This was intended to help users of the (unsupported) Nvidia binary driver, but this has been reported to cause backlight control issues for users who have the gfx configured in hybrid (dual-GPU) mode, so drop this. The Nvidia binary driver should call acpi_video_register_backlight() when necessary and this has been reported to Nvidia. Until this is fixed Nvidia binary driver users can work around this by passing "acpi_backlight=video" on the kernel commandline (with the latest 6.1.y or newer stable series, kernels < 6.1.y don't need this). Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530") Reported-by: Русев Путин <rockeraliexpress@gmail.com> Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/ Cc: 6.1+ <stable@vger.kernel.org> # 6.1+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 04 May 2023, 18:23:41 UTC |