| f21b807 | Linus Torvalds | 11 June 2021, 19:33:38 UTC | Merge tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Another week of fixes, nothing too crazy, but a few all over the place. Two locking fixes in the core/ttm area, a couple of small driver fixes (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes each, mostly for smaller things, though the msm has a DSI fix for a black screen. I haven't seen any intel fixes this week so they may have a few that may or may not wait for next week. drm: - auth locking fix ttm: - locking fix amdgpu: - Use kvzmalloc in amdgu_bo_create - Use drm_dbg_kms for reporting failure to get a GEM FB - Fix some register offsets for Sienna Cichlid - Fix fall-through warning radeon: - memcpy_to/from_io fixes msm: - NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix sun4i: - hdmi output probing fix mcde: - DSI pipeline calc fix vc4: - out of bounds fix" * tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm: drm/msm/dsi: Stash away calculated vco frequency on recalc drm: Lock pointer access in drm_master_release() drm/mcde: Fix off by 10^3 in calculation drm/msm/a6xx: avoid shadow NULL reference in failure path drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650 drm/msm/a6xx: update/fix CP_PROTECT initialization radeon: use memcpy_to/fromio for UVD fw upload drm/amd/pm: Fix fall-through warning for Clang drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create drm/msm: Init mm_list before accessing it for use_vram path drm: Fix use-after-free read in drm_getunique() drm/vc4: fix vc4_atomic_commit_tail() logic drm/ttm: fix deref of bo->ttm without holding the lock v2 drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device | 11 June 2021, 19:33:38 UTC |
| 929d931 | Linus Torvalds | 11 June 2021, 18:02:56 UTC | Merge tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fix from Rob Herring: "A single fix for broken media/renesas,drif.yaml binding schema" * tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: media: dt-bindings: media: renesas,drif: Fix fck definition | 11 June 2021, 18:02:56 UTC |
| d17bcc5 | Linus Torvalds | 11 June 2021, 17:53:43 UTC | Merge tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a problematic recent commit and fix a regression introduced during the 5.12 development cycle. Specifics: - Revert recent commit that attempted to fix the FACS table reference counting but introduced a problem with accessing the hardware signature after hibernation (Zhang Rui). - Fix regression in the _OSC handling that broke the loading of ACPI tables on some systems (Mika Westerberg)" * tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Pass the same capabilities to the _OSC regardless of the query flag Revert "ACPI: sleep: Put the FACS table after using it" | 11 June 2021, 17:53:43 UTC |
| fd2cd56 | Linus Torvalds | 11 June 2021, 17:47:10 UTC | Merge tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bit more commits than expected at this time, but likely it's the last shot before the final. Many of changes are device-specific fix-ups for various ASoC drivers, while a few usual HD-audio quirks and a FireWire fix, as well as a couple of ALSA / ASoC core fixes. All look nice and small, and nothing to scare much" * tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix race of snd_seq_timer_open() ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8 ALSA: hda/realtek: headphone and mic don't work on an Acer laptop ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun() ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2 ASoC: rt5682: Fix the fast discharge for headset unplugging in soundwire mode ASoC: tas2562: Fix TDM_CFG0_SAMPRATE values ASoC: meson: gx-card: fix sound-dai dt schema ASoC: AMD Renoir: Remove fix for DMI entry on Lenovo 2020 platforms ASoC: AMD Renoir - add DMI entry for Lenovo 2020 AMD platforms ASoC: SOF: reset enabled_cores state at suspend ASoC: fsl-asoc-card: Set .owner attribute when registering card. ASoC: topology: Fix spelling mistake "vesion" -> "version" ASoC: rt5659: Fix the lost powers for the HDA header ASoC: core: Fix Null-point-dereference in fmt_single_name() | 11 June 2021, 17:47:10 UTC |
| 4244b5d | Linus Torvalds | 11 June 2021, 17:07:50 UTC | Merge tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes for tps23861, scpi-hwmon, and corsair-psu drivers, plus a bindings fix for TI ADS7828" * tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tps23861) correct shunt LSB values hwmon: (tps23861) set current shunt value hwmon: (tps23861) define regmap max register hwmon: (scpi-hwmon) shows the negative temperature properly hwmon: (corsair-psu) fix suspend behavior dt-bindings: hwmon: Fix typo in TI ADS7828 bindings | 11 June 2021, 17:07:50 UTC |
| f30dc8f | Linus Torvalds | 11 June 2021, 17:02:30 UTC | Merge tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes to the Renesas SDHI driver: - Fix HS400 on R-Car M3-W+ - Abort tuning when timeout detected" * tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+ mmc: renesas_sdhi: abort tuning when timeout detected | 11 June 2021, 17:02:30 UTC |
| bc8865a | Rafael J. Wysocki | 11 June 2021, 15:57:24 UTC | Merge branch 'acpi-bus' * acpi-bus: ACPI: Pass the same capabilities to the _OSC regardless of the query flag | 11 June 2021, 15:57:24 UTC |
| 7de5c0d | Dave Airlie | 11 June 2021, 01:17:09 UTC | Merge tag 'amd-drm-fixes-5.13-2021-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-09: amdgpu: - Use kvzmalloc in amdgu_bo_create - Use drm_dbg_kms for reporting failure to get a GEM FB - Fix some register offsets for Sienna Cichlid - Fix fall-through warning radeon: - memcpy_to/from_io fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610035631.3943-1-alexander.deucher@amd.com | 11 June 2021, 01:17:10 UTC |
| 750643a | Dave Airlie | 11 June 2021, 00:59:49 UTC | Merge tag 'drm-misc-fixes-2021-06-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One fix for snu4i that prevents it from probing, two locking fixes for ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to prevent an out-of-bounds access. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour | 11 June 2021, 00:59:55 UTC |
| 43f44f5 | Dave Airlie | 11 June 2021, 00:45:27 UTC | Merge tag 'drm-msm-fixes-2021-06-10' of https://gitlab.freedesktop.org/drm/msm into drm-fixes - NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvbcz0=QxGYnX9u7cD1SCvFSx20dzrZuOccjtRRBTJd5Q@mail.gmail.com | 11 June 2021, 00:46:01 UTC |
| 06af867 | Eric W. Biederman | 10 June 2021, 20:11:11 UTC | coredump: Limit what can interrupt coredumps Olivier Langlois has been struggling with coredumps being incompletely written in processes using io_uring. Olivier Langlois <olivier@trillion01.com> writes: > io_uring is a big user of task_work and any event that io_uring made a > task waiting for that occurs during the core dump generation will > generate a TIF_NOTIFY_SIGNAL. > > Here are the detailed steps of the problem: > 1. io_uring calls vfs_poll() to install a task to a file wait queue > with io_async_wake() as the wakeup function cb from io_arm_poll_handler() > 2. wakeup function ends up calling task_work_add() with TWA_SIGNAL > 3. task_work_add() sets the TIF_NOTIFY_SIGNAL bit by calling > set_notify_signal() The coredump code deliberately supports being interrupted by SIGKILL, and depends upon prepare_signal to filter out all other signals. Now that signal_pending includes wake ups for TIF_NOTIFY_SIGNAL this hack in dump_emitted by the coredump code no longer works. Make the coredump code more robust by explicitly testing for all of the wakeup conditions the coredump code supports. This prevents new wakeup conditions from breaking the coredump code, as well as fixing the current issue. The filesystem code that the coredump code uses already limits itself to only aborting on fatal_signal_pending. So it should not develop surprising wake-up reasons either. v2: Don't remove the now unnecessary code in prepare_signal. Cc: stable@vger.kernel.org Fixes: 12db8b690010 ("entry: Add support for TIF_NOTIFY_SIGNAL") Reported-by: Olivier Langlois <olivier@trillion01.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 June 2021, 21:02:29 UTC |
| f09eacc | Linus Torvalds | 10 June 2021, 19:01:22 UTC | Merge branch 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "This is a high priority but low risk fix for a cgroup1 bug where rename(2) can change a cgroup's name to something which can break parsing of /proc/PID/cgroup" * 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup1: don't allow '\n' in renaming | 10 June 2021, 19:01:22 UTC |
| 29a877d | Linus Torvalds | 10 June 2021, 17:53:04 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "A mixture of small bug fixes and a small security issue: - WARN_ON when IPoIB is automatically moved between namespaces - Long standing bug where mlx5 would use the wrong page for the doorbell recovery memory if fork is used - Security fix for mlx4 that disables the timestamp feature - Several crashers for mlx5 - Plug a recent mlx5 memory leak for the sig_mr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix initializing CQ fragments buffer RDMA/mlx5: Delete right entry from MR signature database RDMA: Verify port when creating flow rule RDMA/mlx5: Block FDB rules when not in switchdev mode RDMA/mlx4: Do not map the core_clock page to user space unless enabled RDMA/mlx5: Use different doorbell memory for different processes RDMA/ipoib: Fix warning caused by destroying non-initial netns | 10 June 2021, 17:53:04 UTC |
| e13d112 | Robert Marko | 09 June 2021, 22:07:28 UTC | hwmon: (tps23861) correct shunt LSB values Current shunt LSB values got reversed during in the original driver commit. So, correct the current shunt LSB values according to the datasheet. This caused reading slightly skewed current values. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-3-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 10 June 2021, 15:40:09 UTC |
| b325d35 | Robert Marko | 09 June 2021, 22:07:27 UTC | hwmon: (tps23861) set current shunt value TPS23861 has a configuration bit for setting of the current shunt value used on the board. Its bit 0 of the General Mask 1 register. According to the datasheet bit values are: 0 for 255 mOhm (Default) 1 for 250 mOhm So, configure the bit before registering the hwmon device according to the value passed in the DTS or default one if none is passed. This caused potentially reading slightly skewed values due to max current value being 1.02A when 250mOhm shunt is used instead of 1.0A when 255mOhm is used. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 10 June 2021, 15:38:52 UTC |
| fb8543f | Robert Marko | 09 June 2021, 22:07:26 UTC | hwmon: (tps23861) define regmap max register Define the max register address the device supports. This allows reading the whole register space via regmap debugfs, without it only register 0x0 is visible. This was forgotten in the original driver commit. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 10 June 2021, 15:36:19 UTC |
| 83e197a | Takashi Iwai | 10 June 2021, 15:20:59 UTC | ALSA: seq: Fix race of snd_seq_timer_open() The timer instance per queue is exclusive, and snd_seq_timer_open() should have managed the concurrent accesses. It looks as if it's checking the already existing timer instance at the beginning, but it's not right, because there is no protection, hence any later concurrent call of snd_seq_timer_open() may override the timer instance easily. This may result in UAF, as the leftover timer instance can keep running while the queue itself gets closed, as spotted by syzkaller recently. For avoiding the race, add a proper check at the assignment of tmr->timeri again, and return -EBUSY if it's been already registered. Reported-by: syzbot+ddc1260a83ed1cbf6fb5@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000dce34f05c42f110c@google.com Link: https://lore.kernel.org/r/20210610152059.24633-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 June 2021, 15:21:30 UTC |
| 170b763 | Stephen Boyd | 08 June 2021, 19:55:19 UTC | drm/msm/dsi: Stash away calculated vco frequency on recalc A problem was reported on CoachZ devices where the display wouldn't come up, or it would be distorted. It turns out that the PLL code here wasn't getting called once dsi_pll_10nm_vco_recalc_rate() started returning the same exact frequency, down to the Hz, that the bootloader was setting instead of 0 when the clk was registered with the clk framework. After commit 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll structure") we use a hardcoded value for the parent clk frequency, i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS, instead of getting it from the config structure. This combination of changes to the recalc function allows us to properly calculate the frequency of the PLL regardless of whether or not the PLL has been clk_prepare()d or clk_set_rate()d. That's a good improvement. Unfortunately, this means that now we won't call down into the PLL clk driver when we call clk_set_rate() because the frequency calculated in the framework matches the frequency that is set in hardware. If the rate is the same as what we want it should be OK to not call the set_rate PLL op. The real problem is that the prepare op in this driver uses a private struct member to stash away the vco frequency so that it can call the set_rate op directly during prepare. Once the set_rate op is never called because recalc_rate told us the rate is the same, we don't set this private struct member before the prepare op runs, so we try to call the set_rate function directly with a frequency of 0. This effectively kills the PLL and configures it for a rate that won't work. Calling set_rate from prepare is really quite bad and will confuse any downstream clks about what the rate actually is of their parent. Fixing that will be a rather large change though so we leave that to later. For now, let's stash away the rate we calculate during recalc so that the prepare op knows what frequency to set, instead of 0. This way things keep working and the display can enable the PLL properly. In the future, we should remove that code from the prepare op so that it doesn't even try to call the set rate function. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll structure") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org> | 10 June 2021, 14:57:48 UTC |
| b7e24eb | Alexander Kuznetsov | 09 June 2021, 07:17:19 UTC | cgroup1: don't allow '\n' in renaming cgroup_mkdir() have restriction on newline usage in names: $ mkdir $'/sys/fs/cgroup/cpu/test\ntest2' mkdir: cannot create directory '/sys/fs/cgroup/cpu/test\ntest2': Invalid argument But in cgroup1_rename() such check is missed. This allows us to make /proc/<pid>/cgroup unparsable: $ mkdir /sys/fs/cgroup/cpu/test $ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2' $ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2' $ cat /proc/self/cgroup 11:pids:/ 10:freezer:/ 9:hugetlb:/ 8:cpuset:/ 7:blkio:/user.slice 6:memory:/user.slice 5:net_cls,net_prio:/ 4:perf_event:/ 3:devices:/user.slice 2:cpu,cpuacct:/test test2 1:name=systemd:/ 0::/ Signed-off-by: Alexander Kuznetsov <wwfq@yandex-team.ru> Reported-by: Andrey Krasichkov <buglloc@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> | 10 June 2021, 13:58:50 UTC |
| 2ba0aa2 | Alaa Hleihel | 10 June 2021, 07:34:27 UTC | IB/mlx5: Fix initializing CQ fragments buffer The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter. Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)") Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 10 June 2021, 11:59:34 UTC |
| 6466f03 | Aharon Landau | 10 June 2021, 07:34:26 UTC | RDMA/mlx5: Delete right entry from MR signature database The value mr->sig is stored in the entry upon mr allocation, however, ibmr is wrongly entered here as "old", therefore, xa_cmpxchg() does not replace the entry with NULL, which leads to the following trace: WARNING: CPU: 28 PID: 2078 at drivers/infiniband/hw/mlx5/main.c:3643 mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Modules linked in: nvme_rdma nvme_fabrics nvme_core 8021q garp mrp bonding bridge stp llc rfkill rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_tad CPU: 28 PID: 2078 Comm: reboot Tainted: G X --------- --- 5.13.0-0.rc2.19.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.9.1 12/07/2018 RIP: 0010:mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Code: 8d bb 70 1f 00 00 be 00 01 00 00 e8 9d 94 ce da 48 3d 00 01 00 00 75 02 5b c3 0f 0b 5b c3 0f 0b 48 83 bb b0 20 00 00 00 74 d5 <0f> 0b eb d1 4 RSP: 0018:ffffa8db06d33c90 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff97f890a44000 RCX: ffff97f900ec0160 RDX: 0000000000000000 RSI: 0000000080080001 RDI: ffff97f890a44000 RBP: ffffffffc0c189b8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000300 R12: ffff97f890a44000 R13: ffffffffc0c36030 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f0d5a8a3b40(0000) GS:ffff98077fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555acbf4f450 CR3: 00000002a6f56002 CR4: 00000000001706e0 Call Trace: mlx5r_remove+0x39/0x60 [mlx5_ib] auxiliary_bus_remove+0x1b/0x30 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x3e0 mlx5_detach_device+0x59/0x90 [mlx5_core] mlx5_unload_one+0x22/0x60 [mlx5_core] shutdown+0x31/0x3a [mlx5_core] pci_device_shutdown+0x34/0x60 device_shutdown+0x15b/0x1c0 __do_sys_reboot.cold+0x2f/0x5b ? vfs_writev+0xc7/0x140 ? handle_mm_fault+0xc5/0x290 ? do_writev+0x6b/0x110 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()") Link: https://lore.kernel.org/r/f3f585ea0db59c2a78f94f65eedeafc5a2374993.1623309971.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 10 June 2021, 11:59:34 UTC |
| 2adcb4c | Maor Gottlieb | 10 June 2021, 07:34:25 UTC | RDMA: Verify port when creating flow rule Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 10 June 2021, 11:59:33 UTC |
| c336a5e | Desmond Cheong Zhi Xi | 09 June 2021, 09:21:19 UTC | drm: Lock pointer access in drm_master_release() This patch eliminates the following smatch warning: drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex' The 'file_priv->master' field should be protected by the mutex lock to '&dev->master_mutex'. This is because other processes can concurrently modify this field and free the current 'file_priv->master' pointer. This could result in a use-after-free error when 'master' is dereferenced in subsequent function calls to 'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'. An example of a scenario that would produce this error can be seen from a similar bug in 'drm_getunique()' that was reported by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the Syzbot report, another process concurrently acquired the device's master mutex in 'drm_setmaster_ioctl()', then overwrote 'fpriv->master' in 'drm_new_set_master()'. The old value of 'fpriv->master' was subsequently freed before the mutex was unlocked. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com | 10 June 2021, 10:22:02 UTC |
| cd1245d | Linus Torvalds | 09 June 2021, 22:23:32 UTC | Merge tag 'platform-drivers-x86-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Assorted pdx86 bug-fixes and some hardware-id additions for 5.13. The mlxreg-hotplug revert is a regression-fix" * tag 'platform-drivers-x86-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/mellanox: mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag" platform/surface: dtx: Add missing mutex_destroy() call in failure path platform/surface: aggregator: Fix event disable function platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support platform/surface: aggregator_registry: Add support for 13" Intel Surface Laptop 4 platform/surface: aggregator_registry: Update comments for 15" AMD Surface Laptop 4 | 09 June 2021, 22:23:32 UTC |
| a4c30b8 | Linus Torvalds | 09 June 2021, 21:48:29 UTC | Merge tag 'compiler-attributes-for-linus-v5.13-rc6' of git://github.com/ojeda/linux Pull compiler attribute update from Miguel Ojeda: "A trivial update to the compiler attributes: Add 'continue' keyword to documentation in comment (from Wei Ming Chen)" * tag 'compiler-attributes-for-linus-v5.13-rc6' of git://github.com/ojeda/linux: Compiler Attributes: Add continue in comment | 09 June 2021, 21:48:29 UTC |
| a25b088 | Linus Torvalds | 09 June 2021, 21:47:16 UTC | Merge tag 'clang-format-for-linus-v5.13-rc6' of git://github.com/ojeda/linux Pull clang-format update from Miguel Ojeda: "The usual update for `clang-format`" * tag 'clang-format-for-linus-v5.13-rc6' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list | 09 June 2021, 21:47:16 UTC |
| cc6cf82 | Linus Torvalds | 09 June 2021, 20:34:48 UTC | Merge tag 'for-5.13-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes that people hit during testing. Zoned mode fix: - fix 32bit value wrapping when calculating superblock offsets Error handling fixes: - properly check filesystema and device uuids - properly return errors when marking extents as written - do not write supers if we have an fs error" * tag 'for-5.13-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: promote debugging asserts to full-fledged checks in validate_super btrfs: return value from btrfs_mark_extent_written() in case of error btrfs: zoned: fix zone number to sector/physical calculation btrfs: do not write supers if we have an fs error | 09 June 2021, 20:34:48 UTC |
| 2f67381 | Linus Torvalds | 09 June 2021, 20:09:57 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Bugfixes, including a TLB flush fix that affects processors without nested page tables" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: fix previous commit for 32-bit builds kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message selftests: kvm: Add support for customized slot0 memory size KVM: selftests: introduce P47V64 for s390x KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior KVM: X86: MMU: Use the correct inherited permissions to get shadow page KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821cee | 09 June 2021, 20:09:57 UTC |
| 78d1355 | Riwen Lu | 04 June 2021, 03:09:59 UTC | hwmon: (scpi-hwmon) shows the negative temperature properly The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Tested-by: Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 09 June 2021, 18:51:30 UTC |
| 7656cd2 | Wilken Gottwalt | 03 June 2021, 11:51:02 UTC | hwmon: (corsair-psu) fix suspend behavior During standby some PSUs turn off the microcontroller. A re-init is required during resume or the microcontroller stays unresponsive. Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YLjCJiVtu5zgTabI@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 09 June 2021, 18:51:30 UTC |
| faffc5d | Nobuhiro Iwamatsu | 31 May 2021, 13:46:55 UTC | dt-bindings: hwmon: Fix typo in TI ADS7828 bindings Fix typo in example for DT binding, changed from 'comatible' to 'compatible'. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20210531134655.720462-1-iwamatsu@nigauri.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 09 June 2021, 18:51:30 UTC |
| 159d8c2 | Mika Westerberg | 09 June 2021, 10:25:33 UTC | ACPI: Pass the same capabilities to the _OSC regardless of the query flag Commit 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") makes acpi_bus_osc_negotiate_platform_control() not only query the platforms capabilities but it also commits the result back to the firmware to report which capabilities are supported by the OS back to the firmware On certain systems the BIOS loads SSDT tables dynamically based on the capabilities the OS claims to support. However, on these systems the _OSC actually clears some of the bits (under certain conditions) so what happens is that now when we call the _OSC twice the second time we pass the cleared values and that results errors like below to appear on the system log: ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330) ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529) In addition the ACPI 6.4 spec says following [1]: If the OS declares support of a feature in the Support Field in one call to _OSC, then it must preserve the set state of that bit (declaring support for that feature) in all subsequent calls. Based on the above we can fix the issue by passing the same set of capabilities to the platform wide _OSC in both calls regardless of the query flag. While there drop the context.ret.length checks which were wrong to begin with (as the length is number of bytes not elements). This is already checked in acpi_run_osc() that also returns an error in that case. Includes fixes by Hans de Goede. [1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717 Fixes: 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") Cc: 5.12+ <stable@vger.kernel.org> # 5.12+ Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 June 2021, 12:20:11 UTC |
| c8a5704 | Linus Walleij | 08 June 2021, 21:33:18 UTC | drm/mcde: Fix off by 10^3 in calculation The calclulation of how many bytes we stuff into the DSI pipeline for video mode panels is off by three orders of magnitude because we did not account for the fact that the DRM mode clock is in kilohertz rather than hertz. This used to be: drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal which would become for example for s6e63m0: 60 x 514 x 831 = 25628040 Hz, but mode->clock is 25628 as it is in kHz. This affects only the Samsung GT-I8190 "Golden" phone right now since it is the only MCDE device with a video mode display. Curiously some specimen work with this code and wild settings in the EOL and empty packets at the end of the display, but I have noticed an eeire flicker until now. Others were not so lucky and got black screens. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Stephan Gerhold <stephan@gerhold.net> Fixes: 920dd1b1425b ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org | 09 June 2021, 12:03:29 UTC |
| 4422829 | Paolo Bonzini | 09 June 2021, 05:49:13 UTC | kvm: fix previous commit for 32-bit builds array_index_nospec does not work for uint64_t on 32-bit builds. However, the size of a memory slot must be less than 20 bits wide on those system, since the memory slot must fit in the user address space. So just store it in an unsigned long. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 09 June 2021, 05:49:13 UTC |
| 8929ef8 | Fabrizio Castro | 08 April 2021, 20:24:36 UTC | media: dt-bindings: media: renesas,drif: Fix fck definition dt_binding_check reports the below error with the latest schema: Documentation/devicetree/bindings/media/renesas,drif.yaml: properties:clock-names:maxItems: False schema does not allow 1 Documentation/devicetree/bindings/media/renesas,drif.yaml: ignoring, error in schema: properties: clock-names: maxItems This patch fixes the problem. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210408202436.3706-1-fabrizio.castro.jz@renesas.com | 09 June 2021, 01:03:57 UTC |
| da27a83 | Paolo Bonzini | 08 June 2021, 19:31:42 UTC | kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com> Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 21:12:05 UTC |
| b53e84e | Lai Jiangshan | 31 May 2021, 17:22:56 UTC | KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync When using shadow paging, unload the guest MMU when emulating a guest TLB flush to ensure all roots are synchronized. From the guest's perspective, flushing the TLB ensures any and all modifications to its PTEs will be recognized by the CPU. Note, unloading the MMU is overkill, but is done to mirror KVM's existing handling of INVPCID(all) and ensure the bug is squashed. Future cleanup can be done to more precisely synchronize roots when servicing a guest TLB flush. If TDP is enabled, synchronizing the MMU is unnecessary even if nested TDP is in play, as a "legacy" TLB flush from L1 does not invalidate L1's TDP mappings. For EPT, an explicit INVEPT is required to invalidate guest-physical mappings; for NPT, guest mappings are always tagged with an ASID and thus can only be invalidated via the VMCB's ASID control. This bug has existed since the introduction of KVM_VCPU_FLUSH_TLB. It was only recently exposed after Linux guests stopped flushing the local CPU's TLB prior to flushing remote TLBs (see commit 4ce94eabac16, "x86/mm/tlb: Flush remote and local TLBs concurrently"), but is also visible in Windows 10 guests. Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Fixes: f38a7b75267f ("KVM: X86: support paravirtualized help for TLB shootdowns") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> [sean: massaged comment and changelog] Message-Id: <20210531172256.2908-1-jiangshanlai@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 21:10:21 UTC |
| edc0b0b | Mark Bloch | 07 June 2021, 08:03:12 UTC | RDMA/mlx5: Block FDB rules when not in switchdev mode Allow creating FDB steering rules only when in switchdev mode. The only software model where a userspace application can manipulate FDB entries is when it manages the eswitch. This is only possible in switchdev mode where we expose a single RDMA device with representors for all the vports that are connected to the eswitch. Fixes: 52438be44112 ("RDMA/mlx5: Allow inserting a steering rule to the FDB") Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 08 June 2021, 20:02:15 UTC |
| ce86c23 | Jonathan Marek | 13 May 2021, 17:14:00 UTC | drm/msm/a6xx: avoid shadow NULL reference in failure path If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend code referencing it will crash. Change the condition to one that avoids this problem (note: creation of shadow_bo is behind this same condition) Fixes: e8b0b994c3a5 ("drm/msm/a6xx: Clear shadow on suspend") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org> | 08 June 2021, 18:26:45 UTC |
| b4387ea | Jonathan Marek | 13 May 2021, 17:13:58 UTC | drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650 Value was shifted in the wrong direction, resulting in the field always being zero, which is incorrect for A650. Fixes: d0bac4e9cd66 ("drm/msm/a6xx: set ubwc config for A640 and A650") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org> | 08 June 2021, 18:26:45 UTC |
| 4084340 | Jonathan Marek | 13 May 2021, 17:13:59 UTC | drm/msm/a6xx: update/fix CP_PROTECT initialization Update CP_PROTECT register programming based on downstream. A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned and also be more clear about what it does. Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the GMU counter is not accessible from the cmdstream. Which also means using the CPU counter for the msm_gpu_submit_flush() tracepoint (as catapult depends on being able to compare this to the start/end values captured in cmdstream). This may need to be revisited when IFPC is enabled. Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the userspace performance tooling (fdperf and pps-producer) expect to be able to configure the CP counters. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca [switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff up commit msg] Signed-off-by: Rob Clark <robdclark@chromium.org> | 08 June 2021, 18:26:45 UTC |
| ab8363d | Chen Li | 04 June 2021, 08:43:02 UTC | radeon: use memcpy_to/fromio for UVD fw upload I met a gpu addr bug recently and the kernel log tells me the pc is memcpy/memset and link register is radeon_uvd_resume. As we know, in some architectures, optimized memcpy/memset may not work well on device memory. Trival memcpy_toio/memset_io can fix this problem. BTW, amdgpu has already done it in: commit ba0b2275a678 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"), that's why it has no this issue on the same gpu and platform. Signed-off-by: Chen Li <chenli@uniontech.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 June 2021, 18:05:11 UTC |
| 924f41e | Gustavo A. R. Silva | 04 June 2021, 05:06:13 UTC | drm/amd/pm: Fix fall-through warning for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 June 2021, 18:04:46 UTC |
| c247c02 | Rohit Khaire | 04 June 2021, 15:02:56 UTC | drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid RLC_CP_SCHEDULERS and RLC_SPARE_INT0 have different offsets for Sienna Cichlid Signed-off-by: Rohit Khaire <rohit.khaire@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 June 2021, 18:03:55 UTC |
| b71a52f | Michel Dänzer | 02 June 2021, 09:53:05 UTC | drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB drm_err meant broken user space could spam dmesg. Fixes: f258907fdd835e "drm/amdgpu: Verify bo size can fit framebuffer size on init." Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 June 2021, 18:03:09 UTC |
| 2a48b59 | Changfeng | 02 June 2021, 13:25:56 UTC | drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create It will cause error when alloc memory larger than 128KB in amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc. Call Trace: alloc_pages_current+0x6a/0xe0 kmalloc_order+0x32/0xb0 kmalloc_order_trace+0x1e/0x80 __kmalloc+0x249/0x2d0 amdgpu_bo_create+0x102/0x500 [amdgpu] ? xas_create+0x264/0x3e0 amdgpu_bo_create_vm+0x32/0x60 [amdgpu] amdgpu_vm_pt_create+0xf5/0x260 [amdgpu] amdgpu_vm_init+0x1fd/0x4d0 [amdgpu] Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 June 2021, 18:01:56 UTC |
| f31500b | Sean Christopherson | 07 June 2021, 17:57:48 UTC | KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: 380e0055bc7e ("KVM: nVMX: trace nested VM-Enter failures detected by H/W") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Message-Id: <20210607175748.674002-1-seanjc@google.com> | 08 June 2021, 17:30:49 UTC |
| 368094d | Linus Torvalds | 08 June 2021, 17:29:39 UTC | Merge tag 'for-linus-5.13b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A single patch fixing a Xen related security bug: a malicious guest might be able to trigger a 'use after free' issue in the xen-netback driver" * tag 'for-linus-5.13b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-netback: take a reference to the RX task thread | 08 June 2021, 17:29:39 UTC |
| f53b16a | Zhenzhong Duan | 08 June 2021, 23:38:16 UTC | selftests: kvm: Add support for customized slot0 memory size Until commit 39fe2fc96694 ("selftests: kvm: make allocation of extra memory take effect", 2021-05-27), parameter extra_mem_pages was used only to calculate the page table size for all the memory chunks, because real memory allocation happened with calls of vm_userspace_mem_region_add() after vm_create_default(). Commit 39fe2fc96694 however changed the meaning of extra_mem_pages to the size of memory slot 0. This makes the memory allocation more flexible, but makes it harder to account for the number of pages needed for the page tables. For example, memslot_perf_test has a small amount of memory in slot 0 but a lot in other slots, and adding that memory twice (both in slot 0 and with later calls to vm_userspace_mem_region_add()) causes an error that was fixed in commit 000ac4295339 ("selftests: kvm: fix overlapping addresses in memslot_perf_test", 2021-05-29) Since both uses are sensible, add a new parameter slot0_mem_pages to vm_create_with_vcpus() and some comments to clarify the meaning of slot0_mem_pages and extra_mem_pages. With this change, memslot_perf_test can go back to passing the number of memory pages as extra_mem_pages. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20210608233816.423958-4-zhenzhong.duan@intel.com> [Squashed in a single patch and rewrote the commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 17:29:10 UTC |
| 374aeb9 | Linus Torvalds | 08 June 2021, 17:25:20 UTC | Merge tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull orphan section fixes from Kees Cook: "These two corner case fixes have been in -next for about a week: - Avoid orphan section in ARM cpuidle (Arnd Bergmann) - Avoid orphan section with !SMP (Nathan Chancellor)" * tag 'orphans-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: vmlinux.lds.h: Avoid orphan section with !SMP ARM: cpuidle: Avoid orphan section warning | 08 June 2021, 17:25:20 UTC |
| 591a22c | Kees Cook | 08 June 2021, 17:12:21 UTC | proc: Track /proc/$pid/attr/ opener mm_struct Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") tried to make sure that there could not be a confusion between the opener of a /proc/$pid/attr/ file and the writer. It used struct cred to make sure the privileges didn't change. However, there were existing cases where a more privileged thread was passing the opened fd to a differently privileged thread (during container setup). Instead, use mm_struct to track whether the opener and writer are still the same process. (This is what several other proc files already do, though for different reasons.) Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Andrea Righi <andrea.righi@canonical.com> Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 June 2021, 17:24:09 UTC |
| 1bc603a | Christian Borntraeger | 08 June 2021, 12:39:54 UTC | KVM: selftests: introduce P47V64 for s390x s390x can have up to 47bits of physical guest and 64bits of virtual address bits. Add a new address mode to avoid errors of testcases going beyond 47bits. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210608123954.10991-1-borntraeger@de.ibm.com> Fixes: ef4c9f4f6546 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 17:19:19 UTC |
| af3511f | Lai Jiangshan | 31 May 2021, 17:46:28 UTC | KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior In record_steal_time(), st->preempted is read twice, and trace_kvm_pv_tlb_flush() might output result inconsistent if kvm_vcpu_flush_tlb_guest() see a different st->preempted later. It is a very trivial problem and hardly has actual harm and can be avoided by reseting and reading st->preempted in atomic way via xchg(). Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20210531174628.10265-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 17:15:20 UTC |
| 45f5669 | Alexey Minnekhanov | 18 May 2021, 10:26:24 UTC | drm/msm: Init mm_list before accessing it for use_vram path Fix NULL pointer dereference caused by update_inactive() trying to list_del() an uninitialized mm_list who's prev/next pointers are NULL. Fixes: 64fcbde772c7 ("drm/msm: Track potentially evictable objects") Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210518102624.1193955-1-alexeymin@postmarketos.org Signed-off-by: Rob Clark <robdclark@chromium.org> | 08 June 2021, 17:08:04 UTC |
| 4c8684f | Linus Torvalds | 08 June 2021, 16:45:00 UTC | Merge tag 'spi-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of SPI fixes that have come up since the merge window, all fairly small fixes for rare cases" * tag 'spi-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd() spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code spi: Cleanup on failure of initial setup spi: bcm2835: Fix out-of-bounds access with more than 4 slaves | 08 June 2021, 16:45:00 UTC |
| 9b1111f | Linus Torvalds | 08 June 2021, 16:41:16 UTC | Merge tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A collection of fixes for the regulator API that have come up since the merge window, including a big batch of fixes from Axel Lin's usual careful and detailed review. The one stand out fix here is Dmitry Baryshkov's fix for an issue where we fail to power on the parents of always on regulators during system startup if they weren't already powered on" * tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits) regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL regulator: hi6421v600: Fix .vsel_mask setting regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837 regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges regulator: rtmv20: Fix to make regcache value first reading back from HW regulator: mt6315: Fix function prototype for mt6315_map_mode regulator: rtmv20: Add Richtek to Kconfig text regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks regulator: hisilicon: use the correct HiSilicon copyright regulator: bd71828: Fix .n_voltages settings regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting regulator: max77620: Silence deferred probe error regulator: max77620: Use device_set_of_node_from_dev() regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting regulator: core: resolve supply for boot-on/always-on regulators regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap regulator: fan53880: Fix missing n_voltages setting regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode regulator: fan53555: fix TCS4525 voltage calulation ... | 08 June 2021, 16:41:16 UTC |
| b1bd5cb | Lai Jiangshan | 03 June 2021, 05:24:55 UTC | KVM: X86: MMU: Use the correct inherited permissions to get shadow page When computing the access permissions of a shadow page, use the effective permissions of the walk up to that point, i.e. the logic AND of its parents' permissions. Two guest PxE entries that point at the same table gfn need to be shadowed with different shadow pages if their parents' permissions are different. KVM currently uses the effective permissions of the last non-leaf entry for all non-leaf entries. Because all non-leaf SPTEs have full ("uwx") permissions, and the effective permissions are recorded only in role.access and merged into the leaves, this can lead to incorrect reuse of a shadow page and eventually to a missing guest protection page fault. For example, here is a shared pagetable: pgd[] pud[] pmd[] virtual address pointers /->pmd1(u--)->pte1(uw-)->page1 <- ptr1 (u--) /->pud1(uw-)--->pmd2(uw-)->pte2(uw-)->page2 <- ptr2 (uw-) pgd-| (shared pmd[] as above) \->pud2(u--)--->pmd1(u--)->pte1(uw-)->page1 <- ptr3 (u--) \->pmd2(uw-)->pte2(uw-)->page2 <- ptr4 (u--) pud1 and pud2 point to the same pmd table, so: - ptr1 and ptr3 points to the same page. - ptr2 and ptr4 points to the same page. (pud1 and pud2 here are pud entries, while pmd1 and pmd2 here are pmd entries) - First, the guest reads from ptr1 first and KVM prepares a shadow page table with role.access=u--, from ptr1's pud1 and ptr1's pmd1. "u--" comes from the effective permissions of pgd, pud1 and pmd1, which are stored in pt->access. "u--" is used also to get the pagetable for pud1, instead of "uw-". - Then the guest writes to ptr2 and KVM reuses pud1 which is present. The hypervisor set up a shadow page for ptr2 with pt->access is "uw-" even though the pud1 pmd (because of the incorrect argument to kvm_mmu_get_page in the previous step) has role.access="u--". - Then the guest reads from ptr3. The hypervisor reuses pud1's shadow pmd for pud2, because both use "u--" for their permissions. Thus, the shadow pmd already includes entries for both pmd1 and pmd2. - At last, the guest writes to ptr4. This causes no vmexit or pagefault, because pud1's shadow page structures included an "uw-" page even though its role.access was "u--". Any kind of shared pagetable might have the similar problem when in virtual machine without TDP enabled if the permissions are different from different ancestors. In order to fix the problem, we change pt->access to be an array, and any access in it will not include permissions ANDed from child ptes. The test code is: https://lore.kernel.org/kvm/20210603050537.19605-1-jiangshanlai@gmail.com/ Remember to test it with TDP disabled. The problem had existed long before the commit 41074d07c78b ("KVM: MMU: Fix inherited permissions for emulated guest pte updates"), and it is hard to find which is the culprit. So there is no fixes tag here. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20210603052455.21023-1-jiangshanlai@gmail.com> Cc: stable@vger.kernel.org Fixes: cea0f0e7ea54 ("[PATCH] KVM: MMU: Shadow page table caching") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 16:29:53 UTC |
| e898da7 | Wanpeng Li | 07 June 2021, 07:19:43 UTC | KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer According to the SDM 10.5.4.1: A write of 0 to the initial-count register effectively stops the local APIC timer, in both one-shot and periodic mode. However, the lapic timer oneshot/periodic mode which is emulated by vmx-preemption timer doesn't stop by writing 0 to TMICT since vmx->hv_deadline_tsc is still programmed and the guest will receive the spurious timer interrupt later. This patch fixes it by also cancelling the vmx-preemption timer when writing 0 to the initial-count register. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1623050385-100988-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 16:22:26 UTC |
| 4f13d47 | Ashish Kalra | 07 June 2021, 06:15:32 UTC | KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821cee Commit 238eca821cee ("KVM: SVM: Allocate SEV command structures on local stack") uses the local stack to allocate the structures used to communicate with the PSP, which were earlier being kzalloced. This breaks SEV live migration for computing the SEND_START session length and SEND_UPDATE_DATA query length as session_len and trans_len and hdr_len fields are not zeroed respectively for the above commands before issuing the SEV Firmware API call, hence the firmware returns incorrect session length and update data header or trans length. Also the SEV Firmware API returns SEV_RET_INVALID_LEN firmware error for these length query API calls, and the return value and the firmware error needs to be passed to the userspace as it is, so need to remove the return check in the KVM code. Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-Id: <20210607061532.27459-1-Ashish.Kalra@amd.com> Fixes: 238eca821cee ("KVM: SVM: Allocate SEV command structures on local stack") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 June 2021, 16:21:55 UTC |
| b436acd | Desmond Cheong Zhi Xi | 08 June 2021, 11:04:36 UTC | drm: Fix use-after-free read in drm_getunique() There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex. An example can be seen in the crash report of the use-after-free error found by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked. To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test. Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com | 08 June 2021, 16:18:58 UTC |
| 8a11e84 | Mark Rutland | 08 June 2021, 08:55:12 UTC | drm/vc4: fix vc4_atomic_commit_tail() logic In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have: * `i` - the index of the CRTC * `channel` - the channel a CRTC is using When we check the channel state, we consult: old_hvs_state->fifo_state[channel].in_use ... but when we wait for the channel, we erroneously wait on: old_hvs_state->fifo_state[i].pending_commit ... rather than: old_hvs_state->fifo_state[channel].pending_commit ... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index. I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN. Trimmed KASAN splat: | ================================================================== | BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910 | Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7 | CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3 | | Hardware name: Raspberry Pi 3 Model B (DT) | Workqueue: events_unbound deferred_probe_work_func | Call trace: | dump_backtrace+0x0/0x2b4 | show_stack+0x1c/0x30 | dump_stack+0xfc/0x168 | print_address_description.constprop.0+0x2c/0x2c0 | kasan_report+0x1dc/0x240 | __asan_load8+0x98/0xd4 | vc4_atomic_commit_tail+0x1cc/0x910 | commit_tail+0x100/0x210 | ... | | Allocated by task 7: | kasan_save_stack+0x2c/0x60 | __kasan_kmalloc+0x90/0xb4 | vc4_hvs_channels_duplicate_state+0x60/0x1a0 | drm_atomic_get_private_obj_state+0x144/0x230 | vc4_atomic_check+0x40/0x73c | drm_atomic_check_only+0x998/0xe60 | drm_atomic_commit+0x34/0x94 | drm_client_modeset_commit_atomic+0x2f4/0x3a0 | drm_client_modeset_commit_locked+0x8c/0x230 | drm_client_modeset_commit+0x38/0x60 | drm_fb_helper_set_par+0x104/0x17c | fbcon_init+0x43c/0x970 | visual_init+0x14c/0x1e4 | ... | | The buggy address belongs to the object at ffff000007360400 | which belongs to the cache kmalloc-128 of size 128 | The buggy address is located 64 bytes inside of | 128-byte region [ffff000007360400, ffff000007360480) | The buggy address belongs to the page: | page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360 | flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff) | raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300 | raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 | page dumped because: kasan: bad access detected | | Memory state around the buggy address: | ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc | ^ | ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ================================================================== Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Will Deacon <will@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com | 08 June 2021, 15:02:17 UTC |
| a0309c3 | Takashi Iwai | 08 June 2021, 14:59:19 UTC | Merge tag 'asoc-fix-v5.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.13 A collection of fixes and device ID updates that have come up in the past few -rcs, none of which stand out particularly. | 08 June 2021, 14:59:19 UTC |
| 6687cd7 | Geert Uytterhoeven | 04 June 2021, 12:59:43 UTC | mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+ R-Car M3-W ES3.0 is marketed as R-Car M3-W+ (R8A77961), and has its own compatible value "renesas,r8a77961". Hence using soc_device_match() with soc_id = "r8a7796" and revision = "ES3.*" does not actually match running on an R-Car M3-W+ SoC. Fix this by matching with soc_id = "r8a77961" instead. Fixes: a38c078fea0b1393 ("mmc: renesas_sdhi: Avoid bad TAP in HS400") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/ee8af5d631f5331139ffea714539030d97352e93.1622811525.git.geert+renesas@glider.be Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> | 08 June 2021, 12:56:54 UTC |
| 2c9017d | Wolfram Sang | 02 June 2021, 07:34:35 UTC | mmc: renesas_sdhi: abort tuning when timeout detected We have to bring the eMMC from sending-data state back to transfer state once we detected a CRC error (timeout) during tuning. So, send a stop command via mmc_abort_tuning(). Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support") Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210602073435.5955-1-wsa+renesas@sang-engineering.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> | 08 June 2021, 12:34:27 UTC |
| 600dd2a | Jeremy Szu | 08 June 2021, 11:47:48 UTC | ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8 The HP ZBook Power G8 using ALC236 codec which using 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608114750.32009-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 June 2021, 12:01:18 UTC |
| 57c9e21 | Hui Wang | 08 June 2021, 02:46:00 UTC | ALSA: hda/realtek: headphone and mic don't work on an Acer laptop There are 2 issues on this machine, the 1st one is mic's plug/unplug can't be detected, that is because the mic is set to manual detecting mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto detecting mode. The other one is headphone's plug/unplug can't be detected by pulseaudio, that is because the pulseaudio will use ucm2/sof-hda-dsp on this machine, and the ucm2 only handle 'Headphone Jack', but on this machine the headphone's pincfg sets the location to Front, then the alsa mixer name is "Front Headphone Jack" instead of "Headphone Jack", so override the pincfg to change location to Left. BugLink: http://bugs.launchpad.net/bugs/1930188 Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 June 2021, 12:00:41 UTC |
| 2d2ddb5 | Christian König | 28 May 2021, 12:34:38 UTC | drm/ttm: fix deref of bo->ttm without holding the lock v2 We need to grab the resv lock first before doing that check. v2 (chk): simplify the change for -fixes Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210528130041.1683-1-christian.koenig@amd.com | 08 June 2021, 11:24:15 UTC |
| dc25573 | Marc Dionne | 06 June 2021, 20:21:27 UTC | afs: Fix partial writeback of large files on fsync and close In commit e87b03f5830e ("afs: Prepare for use of THPs"), the return value for afs_write_back_from_locked_page was changed from a number of pages to a length in bytes. The loop in afs_writepages_region uses the return value to compute the index that will be used to find dirty pages in the next iteration, but treats it as a number of pages and wrongly multiplies it by PAGE_SIZE. This gives a very large index value, potentially skipping any dirty data that was not covered in the first pass, which is limited to 256M. This causes fsync(), and indirectly close(), to only do a partial writeback of a large file's dirty data. The rest is eventually written back by background threads after dirty_expire_centisecs. Fixes: e87b03f5830e ("afs: Prepare for use of THPs") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20210604175504.4055-1-marc.c.dionne@gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 June 2021, 19:56:05 UTC |
| c8a4556 | Srinivasa Rao Mandadapu | 04 June 2021, 15:45:45 UTC | ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin This patch fixes PoP noise of around 15ms observed during audio capture begin. Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for introducing some delay before capture start. (am from https://patchwork.kernel.org/patch/12276369/) (also found at https://lore.kernel.org/r/20210524142114.18676-1-srivasam@codeaurora.org) Co-developed-by: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210604154545.1198337-1-judyhsiao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> | 07 June 2021, 14:54:08 UTC |
| 107866a | Roger Pau Monne | 07 June 2021, 13:13:15 UTC | xen-netback: take a reference to the RX task thread Do this in order to prevent the task from being freed if the thread returns (which can be triggered by the frontend) before the call to kthread_stop done as part of the backend tear down. Not taking the reference will lead to a use-after-free in that scenario. Such reference was taken before but dropped as part of the rework done in 2ac061ce97f4. Reintroduce the reference taking and add a comment this time explaining why it's needed. This is XSA-374 / CVE-2021-28691. Fixes: 2ac061ce97f4 ('xen/netback: cleanup init and deinit code') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: stable@vger.kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> | 07 June 2021, 13:13:15 UTC |
| f1ffa9d | Zhang Rui | 03 June 2021, 02:34:14 UTC | Revert "ACPI: sleep: Put the FACS table after using it" Commit 95722237cb2a ("ACPI: sleep: Put the FACS table after using it") puts the FACS table during initialization. But the hardware signature bits in the FACS table need to be accessed, after every hibernation, to compare with the original hardware signature. So there is no reason to release the FACS table mapping after initialization. This reverts commit 95722237cb2ae4f7b73471058cdb19e8f4057c93. An alternative solution is to use acpi_gbl_FACS variable instead, which is mapped by the ACPICA core and never released. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212277 Reported-by: Stephan Hohe <sth.dev@tejp.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: 5.8+ <stable@vger.kernel.org> # 5.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 07 June 2021, 13:00:52 UTC |
| 9bf3797 | Saravana Kannan | 07 June 2021, 08:58:36 UTC | drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203 Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com | 07 June 2021, 11:41:31 UTC |
| 614124b | Linus Torvalds | 06 June 2021, 22:47:27 UTC | Linux 5.13-rc5 | 06 June 2021, 22:47:27 UTC |
| 90d56a3 | Linus Torvalds | 06 June 2021, 22:39:56 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small and fairly minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V scsi: ufs: ufs-mediatek: Fix HCI version in some platforms scsi: qedf: Do not put host in qedf_vport_create() unconditionally scsi: lpfc: Fix failure to transmit ABTS on FC link scsi: target: core: Fix warning on realtime kernels | 06 June 2021, 22:39:56 UTC |
| 20e41d9 | Linus Torvalds | 06 June 2021, 21:24:13 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Only advertise encrypted_casefold when encryption and unicode are enabled ext4: fix no-key deletion for encrypt+casefold ext4: fix memory leak in ext4_fill_super ext4: fix fast commit alignment issues ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed ext4: fix accessing uninit percpu counter variable with fast_commit ext4: fix memory leak in ext4_mb_init_backend on error path. | 06 June 2021, 21:24:13 UTC |
| decad3e | Linus Torvalds | 06 June 2021, 20:00:36 UTC | Merge tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have been coming in over the last few weeks, the usual mix of fixes: - DT fixups for TI K3 - SATA drive detection fix for TI DRA7 - Power management fixes and a few build warning removals for OMAP - OP-TEE fix to use standard API for UUID exporting - DT fixes for a handful of i.MX boards And a few other smaller items" * tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable optee: use export_uuid() to copy client UUID arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges ... | 06 June 2021, 20:00:36 UTC |
| bd7b12a | Linus Torvalds | 06 June 2021, 19:39:36 UTC | Merge tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix our KVM reverse map real-mode handling since we enabled huge vmalloc (in some configurations). Revert a recent change to our IOMMU code which broke some devices. Fix KVM handling of FSCR on P7/P8, which could have possibly let a guest crash it's Qemu. Fix kprobes validation of prefixed instructions across page boundary. Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas, Frederic Barrat, Naveen N. Rao, and Nicholas Piggin" * tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs" KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path powerpc: Fix reverse map real-mode address lookup with huge vmalloc powerpc/kprobes: Fix validation of prefixed instructions across page boundary | 06 June 2021, 19:39:36 UTC |
| 773ac53 | Linus Torvalds | 06 June 2021, 19:25:43 UTC | Merge tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "A bunch of x86/urgent stuff accumulated for the last two weeks so lemme unload it to you. It should be all totally risk-free, of course. :-) - Fix out-of-spec hardware (1st gen Hygon) which does not implement MSR_AMD64_SEV even though the spec clearly states so, and check CPUID bits first. - Send only one signal to a task when it is a SEGV_PKUERR si_code type. - Do away with all the wankery of reserving X amount of memory in the first megabyte to prevent BIOS corrupting it and simply and unconditionally reserve the whole first megabyte. - Make alternatives NOP optimization work at an arbitrary position within the patched sequence because the compiler can put single-byte NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our previous assumption that the NOPs are only appended. - Force-disable ENQCMD[S] instructions support and remove update_pasid() because of insufficient protection against FPU state modification in an interrupt context, among other xstate horrors which are being addressed at the moment. This one limits the fallout until proper enablement. - Use cpu_feature_enabled() in the idxd driver so that it can be build-time disabled through the defines in disabled-features.h. - Fix LVT thermal setup for SMI delivery mode by making sure the APIC LVT value is read before APIC initialization so that softlockups during boot do not happen at least on one machine. - Mark all legacy interrupts as legacy vectors when the IO-APIC is disabled and when all legacy interrupts are routed through the PIC" * tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Check SME/SEV support in CPUID first x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR x86/setup: Always reserve the first 1M of RAM x86/alternative: Optimize single-byte NOPs at an arbitrary position x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid() dmaengine: idxd: Use cpu_feature_enabled() x86/thermal: Fix LVT thermal setup for SMI delivery mode x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing | 06 June 2021, 19:25:43 UTC |
| e71f99f | Daniel Rosenberg | 03 June 2021, 09:48:49 UTC | ext4: Only advertise encrypted_casefold when encryption and unicode are enabled Encrypted casefolding is only supported when both encryption and casefolding are both enabled in the config. Fixes: 471fbbea7ff7 ("ext4: handle casefolding with encryption") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210603094849.314342-1-drosen@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 06 June 2021, 14:10:23 UTC |
| 63e7f12 | Daniel Rosenberg | 22 May 2021, 00:41:32 UTC | ext4: fix no-key deletion for encrypt+casefold commit 471fbbea7ff7 ("ext4: handle casefolding with encryption") is missing a few checks for the encryption key which are needed to support deleting enrypted casefolded files when the key is not present. This bug made it impossible to delete encrypted+casefolded directories without the encryption key, due to errors like: W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key Repro steps in kvm-xfstests test appliance: mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc mount /vdc mkdir /vdc/dir chattr +F /vdc/dir keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}') xfs_io -c "set_encpolicy $keyid" /vdc/dir for i in `seq 1 100`; do mkdir /vdc/dir/$i done xfs_io -c "rm_enckey $keyid" /vdc rm -rf /vdc/dir # fails with the bug Fixes: 471fbbea7ff7 ("ext4: handle casefolding with encryption") Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 06 June 2021, 14:10:23 UTC |
| afd09b6 | Alexey Makhalov | 21 May 2021, 07:55:33 UTC | ext4: fix memory leak in ext4_fill_super Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed. Fixes: ce40733ce93d ("ext4: Check for return value from sb_set_blocksize") Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 06 June 2021, 14:10:23 UTC |
| a7ba36b | Harshad Shirwadkar | 19 May 2021, 21:59:20 UTC | ext4: fix fast commit alignment issues Fast commit recovery data on disk may not be aligned. So, when the recovery code reads it, this patch makes sure that fast commit info found on-disk is first memcpy-ed into an aligned variable before accessing it. As a consequence of it, we also remove some macros that could resulted in unaligned accesses. Cc: stable@kernel.org Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 06 June 2021, 14:10:23 UTC |
| 082cd4e | Ye Bin | 06 May 2021, 14:10:42 UTC | ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)." Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 06 June 2021, 14:09:55 UTC |
| f5b6eb1 | Linus Torvalds | 05 June 2021, 22:45:11 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some more bugfixes from I2C for v5.13. Usual stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops i2c: qcom-geni: Add shutdown callback for i2c i2c: tegra-bpmp: Demote kernel-doc abuses i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers | 05 June 2021, 22:45:11 UTC |
| b9c112f | Olof Johansson | 05 June 2021, 22:43:46 UTC | Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes Devicetree fixes for TI K3 platforms for v5.13 merge window: These minor fixes include: * Fixups for device tree discovered during yaml conversion * Fixups for missing dma-coherent property in j7200 * Removal of camera sensor node from am65 evm dts to overlay as camera sensor boards are variable. * tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges arm64: dts: ti: k3-*: Rename the TI-SCI node arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent arm64: dts: ti: k3-am654-base-board: remove ov5640 Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituary Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:43:48 UTC |
| 7468bed | Olof Johansson | 05 June 2021, 22:43:10 UTC | Merge tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE use export_uuid() to copy UUID * tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: use export_uuid() to copy client UUID Link: https://lore.kernel.org/r/20210518100712.GA449561@jade Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:43:11 UTC |
| 2f3e4eb | Olof Johansson | 05 June 2021, 22:41:40 UTC | Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes PM and build warning fixes for omaps While chasing system suspend related regressions, I noticed few other issues related to PM would be good to have fixed: - UART idling does not always work for hardware autoidle features - am335x resume works only the first time unless musb module is loaded Then there are three patches for omap1 related warnings caused by the gpio changes, and one build warning fix for legacy mmc platform code when mmc is built as a loadable module. These can all be merged whenever suitable naturally. I've sent the more urgent SATA regression fix separately although it appears in this pull request too because of the branches merged. * tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:41:44 UTC |
| 94277cb | Olof Johansson | 05 June 2021, 22:39:55 UTC | Merge tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Regression fix for TI dra7 SATA not detecting drives The SATA quirk flags are no missing With recent removal of legacy platform data and we need to add the quirk flags to detect drives. * tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing quirk flags for sata Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:39:58 UTC |
| 3091a9e | Olof Johansson | 05 June 2021, 22:39:22 UTC | Merge tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic fixes for v5.13-rc1 - arm64: meson: select COMMON_CLK to select a proper implementation of the clock API - soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() * tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() Link: https://lore.kernel.org/r/73e76706-f3f4-bebf-10dd-d2ec9106a234@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:39:23 UTC |
| 3a2d3ae | Olof Johansson | 05 June 2021, 22:24:10 UTC | Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.13: - Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform pm code. - A couple of patches from Fabio Estevam to fix 'tuning-step' property in imx7d-meerkat96 and imx7d-pico DT. - Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT. - A couple of patches from Lucas Stach to fix regulator and voltage for imx8mq-zii-ultra board. - Add missing regulators for imx6q-dhcom to avoid possible instability issues. - Fix memory-controller settings for fsl-ls1028a DT. - Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28 boards. - Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board. * tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon Signed-off-by: Olof Johansson <olof@lixom.net> | 05 June 2021, 22:24:12 UTC |
| e5220dd | Linus Torvalds | 05 June 2021, 17:55:41 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: mips, mm (kfence, debug, pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc, lib, ocfs2, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: use private address for Michel Lespinasse ocfs2: fix data corruption by fallocate lib: crc64: fix kernel-doc warning mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY mm/kasan/init.c: fix doc warning proc: add .gitignore for proc-subset-pid selftest hugetlb: pass head page to remove_hugetlb_page() drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64 mm/page_alloc: fix counting of free pages after take off from buddy mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests() pid: take a reference when initializing `cad_pid` kfence: use TASK_IDLE when awaiting allocation Revert "MIPS: make userspace mapping young by default" | 05 June 2021, 17:55:41 UTC |
| af8d9eb | Linus Torvalds | 05 June 2021, 17:45:13 UTC | Merge tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - Build with '-mno-relax' when using LLVM's linker, which doesn't support linker relaxation. - A fix to build without SiFive's errata. - A fix to use PAs during init_resources() - A fix to avoid W+X mappings during boot. * tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix memblock_free() usages in init_resources() riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled riscv: mm: Fix W+X mappings at boot riscv: Use -mno-relax when using lld linker | 05 June 2021, 17:45:13 UTC |
| 2eff057 | Michel Lespinasse | 05 June 2021, 03:01:45 UTC | mailmap: use private address for Michel Lespinasse Link: https://lkml.kernel.org/r/20210602221225.49446-1-michel@lespinasse.org Signed-off-by: Michel Lespinasse <michel@lespinasse.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:12 UTC |
| 6bba447 | Junxiao Bi | 05 June 2021, 03:01:42 UTC | ocfs2: fix data corruption by fallocate When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/ Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:12 UTC |
| 415f0c8 | YueHaibing | 05 June 2021, 03:01:39 UTC | lib: crc64: fix kernel-doc warning Fix W=1 kernel build warning: lib/crc64.c:40: warning: bad line: or the previous crc64 value if computing incrementally. Link: https://lkml.kernel.org/r/20210601135851.15444-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Coly Li <colyli@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:12 UTC |
| d84cf06 | Mina Almasry | 05 June 2021, 03:01:36 UTC | mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on an index for which we already have a page in the cache. When this happens, we allocate a second page, double consuming the reservation, and then fail to insert the page into the cache and return -EEXIST. To fix this, we first check if there is a page in the cache which already consumed the reservation, and return -EEXIST immediately if so. There is still a rare condition where we fail to copy the page contents AND race with a call for hugetlb_no_page() for this index and again we will underflow resv_huge_pages. That is fixed in a more complicated patch not targeted for -stable. Test: Hacked the code locally such that resv_huge_pages underflows produce a warning, then: ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success ./tools/testing/selftests/vm/userfaultfd hugetlb 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success Both tests succeed and produce no warnings. After the test runs number of free/resv hugepages is correct. [mike.kravetz@oracle.com: changelog fixes] Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:12 UTC |
| 7b6889f | Yu Kuai | 05 June 2021, 03:01:33 UTC | mm/kasan/init.c: fix doc warning Fix gcc W=1 warning: mm/kasan/init.c:228: warning: Function parameter or member 'shadow_start' not described in 'kasan_populate_early_shadow' mm/kasan/init.c:228: warning: Function parameter or member 'shadow_end' not described in 'kasan_populate_early_shadow' Link: https://lkml.kernel.org/r/20210603140700.3045298-1-yukuai3@huawei.com Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:11 UTC |
| 263e88d | David Matlack | 05 June 2021, 03:01:30 UTC | proc: add .gitignore for proc-subset-pid selftest This new selftest needs an entry in the .gitignore file otherwise git will try to track the binary. Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com Fixes: 268af17ada5855 ("selftests: proc: test subset=pid") Signed-off-by: David Matlack <dmatlack@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:11 UTC |
| 0c5da35 | Naoya Horiguchi | 05 June 2021, 03:01:27 UTC | hugetlb: pass head page to remove_hugetlb_page() When memory_failure() or soft_offline_page() is called on a tail page of some hugetlb page, "BUG: unable to handle page fault" error can be triggered. remove_hugetlb_page() dereferences page->lru, so it's assumed that the page points to a head page, but one of the caller, dissolve_free_huge_page(), provides remove_hugetlb_page() with 'page' which could be a tail page. So pass 'head' to it, instead. Link: https://lkml.kernel.org/r/20210526235257.2769473-1-nao.horiguchi@gmail.com Fixes: 6eb4e88a6d27 ("hugetlb: create remove_hugetlb_page() to separate functionality") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:11 UTC |
| 9281305 | David Hildenbrand | 05 June 2021, 03:01:24 UTC | drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64 offline_pages() properly checks for memory holes and bails out. However, we do a page_zone(pfn_to_page(start_pfn)) before calling offline_pages() when offlining a memory block. We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on aarch64 in offlining code, otherwise we can trigger a BUG when hitting a memory hole: kernel BUG at include/linux/mm.h:1383! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4 Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020 pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) pc : memory_subsys_offline+0x1f8/0x250 lr : memory_subsys_offline+0x1f8/0x250 Call trace: memory_subsys_offline+0x1f8/0x250 device_offline+0x154/0x1d8 online_store+0xa4/0x118 dev_attr_store+0x44/0x78 sysfs_kf_write+0xe8/0x138 kernfs_fop_write_iter+0x26c/0x3d0 new_sync_write+0x2bc/0x4f8 vfs_write+0x718/0xc88 ksys_write+0xf8/0x1e0 __arm64_sys_write+0x74/0xa8 invoke_syscall.constprop.0+0x78/0x1e8 do_el0_svc+0xe4/0x298 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x178/0x180 Kernel panic - not syncing: Oops - BUG: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x00000251,20000846 Memory Limit: none If nr_vmemmap_pages is set, we know that we are dealing with hotplugged memory that doesn't have any holes. So call page_zone(pfn_to_page(start_pfn)) only when really necessary -- when nr_vmemmap_pages is set and we actually adjust the present pages. Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Qian Cai (QUIC) <quic_qiancai@quicinc.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 June 2021, 15:58:11 UTC |
