Skip to main content

Browse the archive

Revision f3d56144c86beb25c7d206efa66d6efba908371c authored by Daniel Walker on 24 May 2010, 17:15:00 UTC, committed by Daniel Walker on 09 June 2010, 15:51:31 UTC 
mmc: msm: fix compile error on MSM7x30
 
MSM7x30 isn't supported in this driver yet. If ones tried to compile it in
with MSM7x30 configure you get,

linux-2.6/drivers/mmc/host/msm_sdcc.c: In function 'msmsdcc_fifo_addr':
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: 'MSM_SDC1_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: (Each undeclared identifier is reported only once
linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: for each function it appears in.)
linux-2.6/drivers/mmc/host/msm_sdcc.c:167: error: 'MSM_SDC2_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:169: error: 'MSM_SDC3_PHYS' undeclared (first use in this function)
linux-2.6/drivers/mmc/host/msm_sdcc.c:171: error: 'MSM_SDC4_PHYS' undeclared (first use in this function)

So we add a Kconfig check to prevent this.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
1 parent 6d7b7d5
Raw File
video-output.txt 

		Video Output Switcher Control
		~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
		2006 luming.yu@intel.com

The output sysfs class driver provides an abstract video output layer that
can be used to hook platform specific methods to enable/disable video output
device through common sysfs interface. For example, on my IBM ThinkPad T42
laptop, The ACPI video driver registered its output devices and read/write
method for 'state' with output sysfs class. The user interface under sysfs is:

linux:/sys/class/video_output # tree .
.
|-- CRT0
|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
|   |-- state
|   |-- subsystem -> ../../../class/video_output
|   `-- uevent
|-- DVI0
|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
|   |-- state
|   |-- subsystem -> ../../../class/video_output
|   `-- uevent
|-- LCD0
|   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
|   |-- state
|   |-- subsystem -> ../../../class/video_output
|   `-- uevent
`-- TV0
   |-- device -> ../../../devices/pci0000:00/0000:00:01.0
   |-- state
   |-- subsystem -> ../../../class/video_output
   `-- uevent
back to top