f56aa8a | Felix Ruess | 02 July 2013, 09:51:33 UTC | [math] fix ecef_of_[ned|enu]_i | 02 July 2013, 11:18:12 UTC |
5dac597 | Stephen Dwyer | 27 June 2013, 16:38:00 UTC | [dfu] Small fix to finddevs timeout | 02 July 2013, 11:17:38 UTC |
0dee842 | Christophe De Wagter | 21 June 2013, 19:31:22 UTC | [fix] logging wrong channels | 22 June 2013, 23:24:03 UTC |
85c75a1 | Christophe De Wagter | 21 June 2013, 19:19:01 UTC | [fix] Yaw command was overwritten by trim. | 22 June 2013, 23:24:03 UTC |
7d70cf9 | Felix Ruess | 20 June 2013, 12:03:23 UTC | [imu] fixes for imu_drotek_10dof_v2 - fix copying of unscaled gyro/accel data - make i2c addresses of mpu and hmc configurable - change orientation so z-axis is down when chips face up: define IMU_DROTEK_2_ORIENTATION_IC_UP - silence some warnings | 22 June 2013, 23:24:02 UTC |
aae9841 | Felix Ruess | 21 June 2013, 07:53:02 UTC | [peripherals] mpu60x0_i2c: only copy ext data if i2c_bypass is false | 22 June 2013, 23:24:02 UTC |
b5512d6 | Felix Ruess | 20 June 2013, 20:54:39 UTC | [nps] make radio_control type datalink work | 22 June 2013, 23:24:02 UTC |
0d5001a | Felix Ruess | 10 June 2013, 13:36:21 UTC | [ground_segment] add joystick hat to input2ivy You can use the Hat<Position>(<hat_name>) function to trigger events, where <Position> is one of Centered/Up/Right/Down/Left/RightUp/RightDown/LeftUp/LeftDown Only one hat can be used, but the interface will allow multiple ones in the future. | 22 June 2013, 23:23:58 UTC |
8a90143 | Felix Ruess | 19 June 2013, 19:19:07 UTC | [rotorcraft] settings and rough example for float ahrs/stabilization | 22 June 2013, 23:21:44 UTC |
1ab2636 | Felix Ruess | 19 June 2013, 18:52:43 UTC | [rotorcraft] add missing include so stabilization_attitude_euler_int can be used standalone | 22 June 2013, 23:21:31 UTC |
9c4637f | Felix Ruess | 19 June 2013, 16:40:19 UTC | [conf] add pcre lib to NPS For some reason this needs to be explicitly specified for Ubuntu 13.04, while it was working without it on 12.04. | 22 June 2013, 23:21:22 UTC |
22d79c7 | Felix Ruess | 17 June 2013, 22:43:01 UTC | [dox] doxygen file header fixes | 17 June 2013, 23:01:20 UTC |
877963e | Felix Ruess | 16 June 2013, 22:38:22 UTC | [release] v5.0 stable version | 16 June 2013, 22:53:43 UTC |
f1b8499 | Dino Hensen | 16 June 2013, 22:46:12 UTC | [conf] update example sessions for ARDrone2 Removed Logitech Joystick because users are not going to have it and it will cause error messages when they launch it. Adding notes in Wiki on how to add joystick yourself. We now only need one session for ardrone2 | 16 June 2013, 22:51:52 UTC |
cf0dba8 | Dino Hensen | 16 June 2013, 22:11:25 UTC | [rotorcraft] check_in_flight without RC Closes #464 Changes to make ARDrone2 SDK fly without joystick Still needs to be properly solved as per issue #201 | 16 June 2013, 22:25:45 UTC |
1931ec6 | Felix Ruess | 14 June 2013, 21:22:54 UTC | cleanup some trailing whitespace | 14 June 2013, 21:22:54 UTC |
20588e8 | fvantienen | 14 June 2013, 17:49:48 UTC | [rotorcraft ]Added ardrone2 sdk version gps, fixed some bugs. The GPS receiver from parrot is added for the SDK version of the ardrone2. This new gps receiver is the flightrecorde from parrot. Also fixed some bugs in the navdata receive of the SDK version, and added some comments to the INS. Closes #463 | 14 June 2013, 21:20:46 UTC |
0195a94 | Gautier Hattenberger | 14 June 2013, 16:22:32 UTC | [airframe] updating some ENAC airframes | 14 June 2013, 16:22:32 UTC |
dab1d0e | Ewoud | 14 June 2013, 13:04:56 UTC | [rotorcraft] rc euler read in fixed point closes #462 | 14 June 2013, 13:27:01 UTC |
b97d8c2 | Felix Ruess | 09 May 2013, 23:04:06 UTC | [peripherals][imu] i2c slaves for the mpu60x0 new IMU drivers using the mpu60x0 peripheral with slave support - aspirin 2 (spi) driver with mag as real slave - drotek 10dof v2 with mag as passthrough slave (untested and axes might be wrong) closes #450 closes #190 | 14 June 2013, 13:04:56 UTC |
65d0889 | Felix Ruess | 14 June 2013, 11:59:31 UTC | [rotorcraft] fix stabilization_attitude_read_rc_setpoint_eulers Reported by Ewoud. The constants max_phi_scale etc. were zero because it is an integer divide where the denominator is larger (depending on STABILIZATION_ATTITUDE_SP_MAX_PHI). This causes the euler setpoint to always be zero. Closes #461 | 14 June 2013, 12:49:01 UTC |
eda1ea3 | Felix Ruess | 14 June 2013, 10:29:08 UTC | [boards] add missing defines for lisa/l board | 14 June 2013, 10:48:20 UTC |
272cb37 | Felix Ruess | 13 June 2013, 19:49:38 UTC | [stm32][ppm] config cleanup | 13 June 2013, 20:47:11 UTC |
4222a3a | Felix Ruess | 13 June 2013, 15:36:43 UTC | [stm32] i2c3 for stm32f4, untested | 13 June 2013, 20:47:11 UTC |
c3e2582 | Felix Ruess | 13 June 2013, 20:44:20 UTC | [stm32][conf] fix UART1_GPIO_RX on lisa/m | 13 June 2013, 20:47:01 UTC |
a3c87b0 | Felix Ruess | 13 June 2013, 15:23:30 UTC | [conf][stm32] spektrum defines for Lisa/L | 13 June 2013, 15:23:30 UTC |
10006e9 | Felix Ruess | 13 June 2013, 15:13:13 UTC | [stm32][i2c] pin configuration in board files Use the gpio_enable_clock helper function. Also remove the unused scl_pin and sda_pin variables in the i2c struct. | 13 June 2013, 15:13:13 UTC |
e7bca1f | Felix Ruess | 13 June 2013, 14:08:55 UTC | [stm32] spektrum for F4 Not tested on an actual F4 board! Using some of the new gpio helper functions. Also removed seemingly useless DebugInit. | 13 June 2013, 14:08:55 UTC |
42d11fb | Felix Ruess | 13 June 2013, 07:25:44 UTC | [conf] fix some example GLS_APPROACH defines | 13 June 2013, 07:25:44 UTC |
09d5bcc | Tobias Muench | 21 May 2013, 03:15:33 UTC | GLS (new) implemented a new intercept that takes into account wind on final and APP_Angle fixed desired altitude to match the actual setpoint should work now with any type of vertical control since all control parameters have been removed closes #453 | 12 June 2013, 22:57:19 UTC |
bc64049 | Felix Ruess | 12 June 2013, 22:19:04 UTC | [mcu_periph] gpio helper functions also removed the old gpio1 that was used on lpc and fixedwing firmware | 12 June 2013, 22:42:06 UTC |
d72934e | Dino Hensen | 09 June 2013, 20:20:29 UTC | Fixing issue that arised after commit 1de769b6f20679419e0baf41b1ab87413f7972c6, compiles fine. Test flight needed. | 09 June 2013, 21:27:14 UTC |
87abc44 | Dino Hensen | 09 June 2013, 14:06:52 UTC | Renamed wifi to udp and started using PprzTransport again | 09 June 2013, 21:27:10 UTC |
0dc71e3 | Felix Ruess | 08 June 2013, 18:49:56 UTC | [stm32][uart] refactor pin configuration UART pins on F1 boards now also defined in board files | 08 June 2013, 18:49:56 UTC |
d19bdcd | Felix Ruess | 08 June 2013, 15:44:02 UTC | [stm32] fix init for UART6 | 08 June 2013, 15:44:02 UTC |
572ba12 | Felix Ruess | 02 May 2013, 22:20:35 UTC | [rotorcraft] fix STAB_ATTITUDE telemetry | 08 June 2013, 12:58:54 UTC |
8d2781e | Felix Ruess | 02 May 2013, 22:05:45 UTC | [rotorcraft] horizontal guidance mode switching If swtiching to HOVER or NAV mode: reset attitude stabilization if previous mode was not using it | 08 June 2013, 12:58:54 UTC |
e28f7ff | Felix Ruess | 02 May 2013, 21:27:27 UTC | [rotorcraft] remove unused STICKS_RMAT312 hack | 08 June 2013, 12:58:54 UTC |
1de769b | Felix Ruess | 02 May 2013, 20:09:41 UTC | [rotorcraft] big fat attempt to clean stabilization and guidance - No more STABILIZATION_ATTITUDE_FLOAT_x in airframe file. - Hopefully seamlessly switch between int and float. - Also make it possible to not use a reference at all, e.g. for passthrough | 08 June 2013, 12:58:53 UTC |
2556e6e | Felix Ruess | 08 June 2013, 12:09:54 UTC | [conf] add ms-sidewinder joystick | 08 June 2013, 12:09:54 UTC |
e313b55 | Dino Hensen | 07 June 2013, 22:35:16 UTC | added Esky EK2-0905A joystick to play with | 07 June 2013, 23:13:38 UTC |
e42e2dd | Dino Hensen | 07 June 2013, 22:25:47 UTC | Enabled usage of magnetometer again and changed back SP_MAX_R to 90 deg/s | 07 June 2013, 23:13:38 UTC |
f89ab73 | Dino Hensen | 07 June 2013, 22:16:30 UTC | [datalink] Fixed a bug in wifi.c The buffer was not cleared resulting in a constant reparsing of the same message when no other message was sent to the drone during idling time. Big thanks to Freek for helping out with this | 07 June 2013, 23:12:52 UTC |
a7b46f4 | Gautier Hattenberger | 06 June 2013, 21:42:50 UTC | [supervision] reload targets when changing airframe fix #233 | 06 June 2013, 21:42:50 UTC |
1c6aec3 | Gautier Hattenberger | 06 June 2013, 15:19:59 UTC | [dfu] remove verbose mode (not useful) | 06 June 2013, 15:19:59 UTC |
35f87c0 | Gautier Hattenberger | 06 June 2013, 15:13:06 UTC | [hmc] fix telemetry report for hmc58xx module | 06 June 2013, 15:13:06 UTC |
6350452 | Felix Ruess | 06 June 2013, 09:22:04 UTC | [stm32] specify PPM_IRQ_CCIF for lisa boards closes #451 | 06 June 2013, 09:22:08 UTC |
d9c68f9 | Felix Ruess | 05 June 2013, 20:45:54 UTC | make TELEMETRY_FREQUENCY changeable, still defaults to 60Hz | 05 June 2013, 20:45:54 UTC |
04fe432 | Gautier Hattenberger | 05 June 2013, 15:48:02 UTC | [fix] c and h files were swapped | 05 June 2013, 15:48:02 UTC |
a2b0fde | Gautier Hattenberger | 05 June 2013, 12:51:13 UTC | [dfu] add dfu-util support to flash stm32 display in paparazzi center is still confusing. It seems the verbose mode is not on stdout and the information status are red (dfuERROR status) while they are not errors | 05 June 2013, 12:51:13 UTC |
a4e6748 | Felix Ruess | 04 June 2013, 21:59:35 UTC | [ins] USE_INS_NAV_INIT now defaults to TRUE | 04 June 2013, 21:59:35 UTC |
4b32701 | Felix Ruess | 04 June 2013, 20:12:52 UTC | [ext] update luftboot for latest libopencm3 | 04 June 2013, 21:00:01 UTC |
058e4c1 | Felix Ruess | 04 June 2013, 17:37:24 UTC | Merge initial stm32f4 support - apogee board working, including IMU - KroozSD board files, IMU driver still missing - not all peripherls have f4 support yet - configuration cleanup, e.g. pin assignments in board header files - mpu60x0 peripheral (without slave support so far) - uart_periph_set_mode with separate tx,rx enable - update libopencm3 for uart6 and timer fixes and other stuff.... | 04 June 2013, 17:37:24 UTC |
211187a | Felix Ruess | 04 June 2013, 17:25:17 UTC | [mcu_periph] fix UART2SetBaudrate | 04 June 2013, 17:25:17 UTC |
ed489f5 | Felix Ruess | 04 June 2013, 17:21:26 UTC | [stm32] fix ppm for LisaL | 04 June 2013, 17:21:26 UTC |
b084e20 | Felix Ruess | 04 June 2013, 17:00:01 UTC | [stm32] fix ADC sample rate after libopencm3 update | 04 June 2013, 17:00:38 UTC |
fb272f4 | Felix Ruess | 04 June 2013, 16:44:58 UTC | [ext] update libopencm3 to get timer_ic_set_polarity on F1 again | 04 June 2013, 17:00:35 UTC |
3328dfb | Felix Ruess | 04 June 2013, 16:26:04 UTC | fix test_rc_spektrum, remove unused USE_TIM6_IRQ | 04 June 2013, 17:00:30 UTC |
6cbe186 | Felix Ruess | 03 June 2013, 13:25:29 UTC | Merge pull request #440 from EwoudSmeur/switch_sticks Added possibility to switch sticks The reason for this commit is that the sticks in rate control are 'quadcopter sticks'. This is because the default (IMU_TO_BODY) configuration is hover. The only way to get the sticks naturally right is to have the BODY_TO_IMU orientation as airplane. The easier way is to just switch roll and yaw when in rate control, if the user defined this in his airframe of course. | 03 June 2013, 13:25:29 UTC |
e1df2e5 | Felix Ruess | 03 June 2013, 13:08:50 UTC | [ardrone2] merge remaining ardrone2 support closes #396 | 03 June 2013, 13:08:50 UTC |
f623864 | Felix Ruess | 01 June 2013, 11:43:23 UTC | [multimon] use -fPIC for all arch except 32bit i686 | 01 June 2013, 11:43:23 UTC |
922ee37 | Christophe De Wagter | 31 May 2013, 15:43:04 UTC | Merge pull request #449 from EwoudSmeur/autonomous_transition Added example airframe file for Quadshot on master | 31 May 2013, 15:43:04 UTC |
580a3b2 | Ewoud | 31 May 2013, 15:35:28 UTC | updated Quadshot airframe file | 31 May 2013, 15:35:28 UTC |
c1f2b91 | Gautier Hattenberger | 31 May 2013, 13:50:21 UTC | [fix] bug fix in sht25 module | 31 May 2013, 13:50:21 UTC |
64549e0 | Ewoud | 31 May 2013, 13:08:23 UTC | Added example airframe file for Quadshot on master | 31 May 2013, 13:08:23 UTC |
f105fd9 | Felix Ruess | 30 May 2013, 16:25:03 UTC | [ext] don't build libopencm3 stm32f2 as it is not used atm | 30 May 2013, 16:25:03 UTC |
92f94e5 | Christophe De Wagter | 29 May 2013, 12:48:25 UTC | [fix] Silent warning | 29 May 2013, 12:48:25 UTC |
e599975 | Christophe De Wagter | 29 May 2013, 12:39:20 UTC | [shortcut] Solve compiler path issues while flashing LuftBoot | 29 May 2013, 12:39:20 UTC |
0c02be4 | Christophe De Wagter | 29 May 2013, 12:01:42 UTC | [warning] Missing initializer | 29 May 2013, 12:01:42 UTC |
e90cee5 | Gautier Hattenberger | 28 May 2013, 16:15:45 UTC | [gcs] use correctly "visible" attribute for link page this should solve #445 | 28 May 2013, 16:17:22 UTC |
11ce753 | Gautier Hattenberger | 28 May 2013, 14:11:26 UTC | Merge pull request #447 from TobiasMue/energy_ctrl fix v_ctl_climb_loop and v_ctl_altitude_loop are called by different fre... | 28 May 2013, 14:11:26 UTC |
e5d0371 | Gautier Hattenberger | 28 May 2013, 14:09:30 UTC | Merge pull request #446 from TobiasMue/amsys Amsys | 28 May 2013, 14:09:30 UTC |
d6a2f6f | Christophe De Wagter | 20 May 2013, 07:54:07 UTC | [fix] circle-count without rewinding when flying in opposite direction | 21 May 2013, 13:23:32 UTC |
73aad01 | Christophe De Wagter | 20 May 2013, 13:22:19 UTC | [ins] xsens_mtig700 | 21 May 2013, 13:11:48 UTC |
63a527c | Christophe De Wagter | 20 May 2013, 13:37:33 UTC | [trim] rudder-trim | 21 May 2013, 13:11:10 UTC |
542148e | Tobias Muench | 21 May 2013, 06:55:48 UTC | fix v_ctl_climb_loop and v_ctl_altitude_loop are called by different frequencies therefor they need different time increments dt_navigation (4Hz) and dt_attitude (60Hz) | 21 May 2013, 06:57:23 UTC |
7ab792f | Tobias Muench | 20 May 2013, 18:24:16 UTC | fix corrected i2c adress to match wiki 74-E8 72-E4 it s the first bit that is ignored! not the last one | 20 May 2013, 18:58:21 UTC |
9f208ff | Tobias Muench | 20 May 2013, 16:05:47 UTC | fix for SITL | 20 May 2013, 18:55:06 UTC |
45e46d9 | Felix Ruess | 19 May 2013, 23:08:15 UTC | [math] use double in ecef_of_lla_d | 19 May 2013, 23:08:15 UTC |
c84095b | Gautier Hattenberger | 18 May 2013, 14:01:44 UTC | [gcs] the map can be scrolled using the mouse even without the tiles displayed | 18 May 2013, 14:01:44 UTC |
3710206 | Ewoud | 17 May 2013, 16:25:41 UTC | Added possibility to switch sticks | 17 May 2013, 16:25:41 UTC |
31b35f1 | Gautier Hattenberger | 17 May 2013, 14:52:57 UTC | Merge pull request #429 from uaarg/redundant_comms Redundant comms | 17 May 2013, 14:52:57 UTC |
c4b9070 | Christophe De Wagter | 16 May 2013, 13:30:06 UTC | Merge pull request #439 from RoboticaTUDelft/new_joystick [joystick] Added Logitech Extreme 3D Pro joystick | 16 May 2013, 13:30:06 UTC |
b79972b | Sergey Krukovski | 11 May 2013, 15:24:36 UTC | [boards] Porting KroozSD | 12 May 2013, 21:47:31 UTC |
3e689f0 | Sergey Krukovski | 12 May 2013, 21:24:23 UTC | [tools] update dfu script - add a timeout so you have time to connect the device - less verbose, don't print all addresses | 12 May 2013, 21:30:24 UTC |
cf6b179 | Dino Hensen | 10 May 2013, 16:34:01 UTC | [omap] All OMAP aditions add during ardrone development | 11 May 2013, 07:52:50 UTC |
5d866e1 | Tobias Muench | 07 May 2013, 04:51:19 UTC | safety feature for energy_ctrl adjustment of v_ctl_climb_setpoint to assure safe airspeed i case of a deficiency in energy | 11 May 2013, 07:52:44 UTC |
a5b09be | Felix Ruess | 09 May 2013, 16:59:45 UTC | [conf] update MentorEnergy example after energy_ctrl update | 09 May 2013, 16:59:45 UTC |
a511891 | Dino Hensen | 30 April 2013, 16:18:05 UTC | [telemetry_wifi] Added telemetry wifi: - wifi.[ch] for communication over wifi - telemetry_wifi makefile - adjustments to fms_network for doing a network_read - wifi including in downlink - wifi implementing datalink macro structure - fixed some trailing empty lines - radio_control_datalink makefile moved from fixedwing to shared | 09 May 2013, 15:11:53 UTC |
61512c2 | Tobias Muench | 06 May 2013, 16:18:17 UTC | fixedwing energy_ctrl rate limiter with GS protect rate limiter now in m/s/s (AIRSPEED_SETPOINT_SLEW) fix in init | 06 May 2013, 16:18:17 UTC |
841dfe8 | Tobias Muench | 05 May 2013, 23:45:38 UTC | [modules] baro_ets: fix for SITL | 07 May 2013, 11:26:09 UTC |
9f368f2 | Felix Ruess | 07 May 2013, 10:15:00 UTC | [ahrs] float_cmpl: more precise warning | 07 May 2013, 10:15:00 UTC |
eaf52da | Felix Ruess | 07 May 2013, 09:35:22 UTC | [modules] baro_ets: BARO_ETS_TELEMETRY not only in SITL | 07 May 2013, 09:35:22 UTC |
62f918a | Felix Ruess | 06 May 2013, 21:59:24 UTC | [dox] fix comment about initial value of adaptive hover thrust estimation | 06 May 2013, 21:59:24 UTC |
2517243 | Felix Ruess | 06 May 2013, 18:55:36 UTC | [fixedwing] ins_alt_float fixes/updates - correct sign for altitude from baro pressure - set initial altitude to ground_alt - also update altitude after baro update - make GPS_DT defineable in airframe file | 06 May 2013, 19:03:14 UTC |
e57d0f7 | Felix Ruess | 06 May 2013, 18:18:29 UTC | [fixedwing] ins_alt_float: hopefully fix baro altitude | 06 May 2013, 18:18:29 UTC |
1074765 | Felix Ruess | 06 May 2013, 18:07:22 UTC | [ins] rename estimator_z to ins_alt to avoid confusion with old stuff | 06 May 2013, 18:08:08 UTC |
534fe5e | Felix Ruess | 06 May 2013, 13:02:40 UTC | [rotorcraft] navigation_carrot calulation in separate function | 06 May 2013, 13:02:40 UTC |
49059f0 | Felix Ruess | 06 May 2013, 11:58:06 UTC | [stm32] initialize SpektrumState.ReSync in impl_init | 06 May 2013, 11:58:06 UTC |
4f04d85 | Felix Ruess | 06 May 2013, 11:48:32 UTC | [rotorcraft] remove global waypoints_float | 06 May 2013, 11:48:32 UTC |