Revision f88db8a3b74851d311b59bde8278553ff1558174 authored by Brian F. Feldman on 20 September 2000, 23:59:22 UTC, committed by Brian F. Feldman on 20 September 2000, 23:59:22 UTC
PR: 21203 Submitted by: Peter Pentchev <roam@orbitel.bg>
1 parent 2d6598d
configure
#!/bin/sh
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
# Configuration script
# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 1997
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# This file was originally written by K. Richard Pixley.
#
# Shell script to create proper links to machine-dependent files in
# preparation for compilation.
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo,
# config.status is removed.
#
export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$)
remove=rm
hard_link=ln
symbolic_link='ln -s'
#for Test
#remove="echo rm"
#hard_link="echo ln"
#symbolic_link="echo ln -s"
# clear some things potentially inherited from environment.
Makefile=Makefile
Makefile_in=Makefile.in
arguments=
build_alias=
cache_file=config.cache
cache_file_option=
configdirs=
extraconfigdirs=
diroptions=
exec_prefix=
exec_prefixoption=
fatal=
floating_point=default
gas=default
gcc_version=
gcc_version_trigger=
host_alias=NOHOST
host_makefile_frag=
moveifchange=
norecursion=
other_options=
package_makefile_frag=
package_makefile_rules_frag=
prefix=/usr/local
progname=
program_prefix=
program_prefixoption=
program_suffix=
program_suffixoption=
program_transform_name=
program_transform_nameoption=
redirect=
removing=
site=
site_makefile_frag=
site_option=
srcdir=
srctrigger=
subdirs=
target_alias=NOTARGET
target_makefile_frag=
undefs=NOUNDEFS
version="$Revision: 1.270 $"
x11=default
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
### we might need to use some other shell than /bin/sh for running subshells
### If we are on Windows, search for the shell. This will permit people
### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
### without also having to set CONFIG_SHELL. This code will work when
### using bash, which sets OSTYPE.
case "${OSTYPE}" in
*win32*)
if [ x${CONFIG_SHELL} = x ]; then
if [ ! -f /bin/sh ]; then
if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then
CONFIG_SHELL=${SHELL}
export CONFIG_SHELL
else
for prog in sh sh.exe bash bash.exe; do
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/$prog; then
CONFIG_SHELL=$dir/$prog
export CONFIG_SHELL
break
fi
done
IFS="$save_ifs"
test -n "${CONFIG_SHELL}" && break
done
fi
fi
fi
;;
esac
config_shell=${CONFIG_SHELL-/bin/sh}
NO_EDIT="This file was generated automatically by configure. Do not edit."
## this is a little touchy and won't always work, but...
##
## if the argv[0] starts with a slash then it is an absolute name that can (and
## must) be used as is.
##
## otherwise, if argv[0] has no slash in it, we can assume that it is on the
## path. Since PATH might include "." we also add `pwd` to the end of PATH.
##
progname=$0
# if PWD already has a value, it is probably wrong.
if [ -n "$PWD" ]; then PWD=`pwd`; fi
case "${progname}" in
/*) ;;
*/*) ;;
*)
PATH=$PATH:${PWD=`pwd`} ; export PATH
;;
esac
# Loop over all args
while :
do
# Break out if there are no more args
case $# in
0)
break
;;
esac
# Get the first arg, and shuffle
option=$1
shift
# Make all options have two hyphens
orig_option=$option # Save original for error messages
case $option in
--*) ;;
-*) option=-$option ;;
esac
# Split out the argument for options that take them
case $option in
--*=*)
optarg=`echo $option | sed -e 's/^[^=]*=//'`
arguments="$arguments $option"
;;
# These options have mandatory values. Since we didn't find an = sign,
# the value must be in the next argument
--bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*)
optarg=$1
shift
arguments="$arguments $option=$optarg"
;;
--v)
arguments="$arguments -v"
;;
--*)
arguments="$arguments $option"
;;
esac
# Now, process the options
case $option in
--bi*)
bindir=$optarg
diroptions="$diroptions --bindir=$optarg"
;;
--build* | --bu*)
case "$build_alias" in
"") build_alias=$optarg ;;
*) echo '***' Can only configure for one build machine at a time. 1>&2
fatal=yes
;;
esac
;;
--cache*)
cache_file=$optarg
;;
--da*)
datadir=$optarg
diroptions="$diroptions --datadir=$optarg"
;;
--disable-*)
enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
eval $enableopt=no
disableoptions="$disableoptions $option"
;;
--enable-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
eval "$enableopt='$optarg'"
enableoptions="$enableoptions '$option'"
;;
--exec-prefix* | --ex*)
exec_prefix=$optarg
exec_prefixoption="--exec-prefix=$optarg"
;;
--gas | --g*)
gas=yes
;;
--help | --he*)
fatal=yes
;;
--host* | --ho*)
case $host_alias in
NOHOST) host_alias=$optarg ;;
*) echo '***' Can only configure for one host at a time. 1>&2
fatal=yes
;;
esac
;;
--inc*)
includedir=$optarg
diroptions="$diroptions --includedir=$optarg"
;;
--inf*)
infodir=$optarg
diroptions="$diroptions --infodir=$optarg"
;;
--libd*)
libdir=$optarg
diroptions="$diroptions --libdir=$optarg"
;;
--libe*)
libexecdir=$optarg
diroptions="$diroptions --libexecdir=$optarg"
;;
--lo*)
localstatedir=$optarg
diroptions="$diroptions --localstatedir=$optarg"
;;
--ma*)
mandir=$optarg
diroptions="$diroptions --mandir=$optarg"
;;
--nfp | --nf*)
floating_point=no
floating_pointoption="--nfp"
;;
--norecursion | --no*)
norecursion=yes
;;
--ol*)
oldincludedir=$optarg
diroptions="$diroptions --oldincludedir=$optarg"
;;
--prefix* | --pre*)
prefix=$optarg
prefixoption="--prefix=$optarg"
;;
--program-prefix* | --program-p*)
program_prefix=$optarg
program_prefixoption="--program-prefix=$optarg"
;;
--program-suffix* | --program-s*)
program_suffix=$optarg
program_suffixoption="--program-suffix=$optarg"
;;
--program-transform-name* | --program-t*)
# Double any backslashes or dollar signs in the argument
program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
;;
--rm)
removing=--rm
;;
--sb*)
sbindir=$optarg
diroptions="$diroptions --sbindir=$optarg"
;;
--sh*)
sharedstatedir=$optarg
diroptions="$diroptions --sharedstatedir=$optarg"
;;
--silent | --sil* | --quiet | --q*)
redirect=">/dev/null"
verbose=--silent
;;
--site* | --sit*)
site=$optarg
site_option="--site=$optarg"
;;
--srcdir*/ | --sr*/)
# Remove trailing slashes. Otherwise, when the file name gets
# bolted into an object file as debug info, it has two slashes
# in it. Ordinarily this is ok, but emacs takes double slash
# to mean "forget the first part".
srcdir=`echo $optarg | sed -e 's:/$::'`
;;
--srcdir* | --sr*)
srcdir=$optarg
;;
--sy*)
sysconfdir=$optarg
diroptions="$diroptions --sysconfdir=$optarg"
;;
--target* | --ta*)
case $target_alias in
NOTARGET) target_alias=$optarg ;;
*) echo '***' Can only configure for one target at a time. 1>&2
fatal=yes
;;
esac
;;
--tmpdir* | --tm*)
TMPDIR=$optarg
tmpdiroption="--tmpdir=$optarg"
;;
--verbose | --v | --verb*)
redirect=
verbose=--verbose
;;
--version | --V | --vers*)
echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
exit 0
;;
--with-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
eval $withopt="$optarg"
withoptions="$withoptions $option"
;;
--without-*)
withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
eval $withopt=no
withoutoptions="$withoutoptions $option"
;;
--x) with_x=yes
withoptions="$withoptions --with-x"
;;
--x-i* | --x-l*) other_options="$other_options $orig_option"
;;
--*)
echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2
exit 1
;;
*)
case $undefs in
NOUNDEFS) undefs=$option ;;
*) echo '***' Can only configure for one host and one target at a time. 1>&2
fatal=yes
;;
esac
;;
esac
done
# process host and target
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET UNDEFS
#
# The rules are:
# 1. You aren't allowed to specify --host, --target, and undefs at the
# same time.
# 2. Host defaults to undefs.
# 3. If undefs is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target defaults to undefs.
# 5. If undefs is not specified, then target defaults to host.
case "${fatal}" in
"")
# Make sure that host, target & undefs aren't all specified at the
# same time.
case $host_alias---$target_alias---$undefs in
NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
;;
*) echo '***' Can only configure for one host and one target at a time. 1>&2
fatal=yes
break 2
;;
esac
# Now, do defaulting for host.
case $host_alias in
NOHOST)
case $undefs in
NOUNDEFS)
# Neither --host option nor undefs were present.
# Call config.guess.
guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
if host_alias=`${config_shell} ${guesssys}`
then
# If the string we are going to use for
# the target is a prefix of the string
# we just guessed for the host, then
# assume we are running native, and force
# the same string for both target and host.
case $target_alias in
NOTARGET) ;;
*)
if expr $host_alias : $target_alias >/dev/null
then
host_alias=$target_alias
fi
;;
esac
echo "Configuring for a ${host_alias} host." 1>&2
arguments="--host=$host_alias $arguments"
else
echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
fatal=yes
fi
;;
*)
host_alias=$undefs
arguments="--host=$host_alias $arguments"
undefs=NOUNDEFS
;;
esac
esac
# Do defaulting for target. If --target option isn't present, default
# to undefs. If undefs isn't present, default to host.
case $target_alias in
NOTARGET)
case $undefs in
NOUNDEFS)
target_alias=$host_alias
;;
*)
target_alias=$undefs
arguments="--target=$target_alias $arguments"
;;
esac
esac
;;
*) ;;
esac
if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
exec 1>&2
echo Usage: configure [OPTIONS] [HOST]
echo
echo Options: [defaults in brackets]
echo ' --prefix=MYDIR install into MYDIR [/usr/local]'
echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]'
echo ' --help print this message [normal config]'
echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]'
echo ' --host=HOST configure for HOST [determined via config.guess]'
echo ' --norecursion configure this directory only [recurse]'
echo ' --program-prefix=FOO prepend FOO to installed program names [""]'
echo ' --program-suffix=FOO append FOO to installed program names [""]'
echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
echo ' --site=SITE configure with site-specific makefile for SITE'
echo ' --srcdir=DIR find the sources in DIR [. or ..]'
echo ' --target=TARGET configure for TARGET [TARGET=HOST]'
echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]'
echo ' --nfp configure for software floating point [hard float]'
echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
echo ' --without-FOO package FOO is NOT available'
echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
echo ' --disable-FOO do not include feature FOO'
echo
echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
echo
if [ -r config.status ] ; then
cat config.status
fi
exit 1
fi
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
topsrcdir=`cd \`dirname ${progname}\`; pwd`
# this is a hack. sun4 must always be a valid host alias or this will fail.
if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then
true
else
echo '***' cannot find config.sub. 1>&2
exit 1
fi
touch config.junk
if ${config_shell} ${moveifchange} config.junk config.trash ; then
true
else
echo '***' cannot find move-if-change. 1>&2
exit 1
fi
rm -f config.junk config.trash
case "${srcdir}" in
"")
if [ -r configure.in ] ; then
srcdir=.
else
if [ -r ${progname}.in ] ; then
srcdir=`echo ${progname} | sed 's:/configure$::'`
else
echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2
exit 1
fi
fi
;;
*)
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
if [ ! -d ${srcdir} ] ; then
echo "Invalid source directory ${srcdir}" >&2
exit 1
fi
pwd=`pwd`
srcpwd=`cd ${srcdir} ; pwd`
if [ "${pwd}" = "${srcpwd}" ] ; then
srcdir=.
fi
esac
### warn about some conflicting configurations.
case "${srcdir}" in
".") ;;
*)
if [ -f ${srcdir}/config.status ] ; then
echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
exit 1
fi
esac
# default exec_prefix
case "${exec_prefixoption}" in
"") exec_prefix="\$(prefix)" ;;
*) ;;
esac
# Define the trigger file to make sure configure will re-run whenever
# the gcc version number changes.
if [ "${with_gcc_version_trigger+set}" = set ]; then
gcc_version_trigger="$with_gcc_version_trigger"
gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${with_gcc_version_trigger}`
else
# If gcc's sources are available, define the trigger file.
if [ -f ${topsrcdir}/gcc/version.c ] ; then
gcc_version_trigger=${topsrcdir}/gcc/version.c
gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
case "$arguments" in
*--with-gcc-version-trigger=$gcc_version_trigger* )
;;
* )
# Make sure configure.in knows about this.
arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments"
;;
esac
withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions"
fi
fi
### break up ${srcdir}/configure.in.
case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
"")
echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
# Check for a directory that's been converted to use autoconf since
# it was last configured.
if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then
echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2
if [ -r ${srcdir}/configure ] ; then
echo '***' Running the local configure script. 1>&2
case "${cache_file}" in
"") cache_file_option= ;;
*) cache_file_option="--cache-file=${cache_file}" ;;
esac
srcdiroption="--srcdir=${srcdir}"
case "${build_alias}" in
"") buildopt= ;;
*) buildopt="--build=${build_alias}" ;;
esac
eval exec ${config_shell} ${srcdir}/configure ${verbose} \
${buildopt} --host=${host_alias} --target=${target_alias} \
${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
${srcdiroption} ${diroptions} \
${program_prefixoption} ${program_suffixoption} \
${program_transform_nameoption} ${site_option} \
${withoptions} ${withoutoptions} \
${enableoptions} ${disableoptions} ${floating_pointoption} \
${cache_file_option} ${removing} ${other_options} ${redirect}
else
echo '***' There is no configure script present though. 1>&2
fi
fi
exit 1
;;
*) ;;
esac
case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
"")
echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
exit 1
;;
*) ;;
esac
case "${TMPDIR}" in
"") TMPDIR=/tmp ; export TMPDIR ;;
*) ;;
esac
# keep this filename short for &%*%$*# 14 char file names
tmpfile=${TMPDIR}/cONf$$
# Note that under many versions of sh a trap handler for 0 will *override* any
# exit status you explicitly specify! At this point, the only non-error exit
# is at the end of the script; these actions are duplicated there, minus
# the "exit 1". Don't use "exit 0" anywhere after this without resetting the
# trap handler, or you'll lose.
trap "rm -f Makefile.tem ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15
# split ${srcdir}/configure.in into common, per-host, per-target,
# and post-target parts. Post-target is optional.
sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com
sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst
if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then
sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt
sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos
else
sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt
echo >${tmpfile}.pos
fi
### do common part of configure.in
# If the language specific compiler does not exist, but the "gcc" directory does,
# we will skip this directory; in this case the sub-directory's common part
# of configure.in will create a small shell script "skip-this-dir" containing
# commands to completely clean up any temporary or created files.
. ${tmpfile}.com
if test -f skip-this-dir; then
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.
trap 0
rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
# Execute the final clean-up actions
${config_shell} skip-this-dir
# and stop configuring this directory.
exit 0
fi
# some sanity checks on configure.in
case "${srctrigger}" in
"")
echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2
exit 1
;;
*) ;;
esac
case "${build_alias}" in
"")
if result=`${config_shell} ${configsub} ${host_alias}` ; then
build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
build=${build_cpu}-${build_vendor}-${build_os}
build_alias=${host_alias}
fi
;;
*)
if result=`${config_shell} ${configsub} ${build_alias}` ; then
buildopt="--build=${build_alias}"
build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
build=${build_cpu}-${build_vendor}-${build_os}
else
echo "Unrecognized build system name ${build_alias}." 1>&2
exit 1
fi
;;
esac
if result=`${config_shell} ${configsub} ${host_alias}` ; then
true
else
echo "Unrecognized host system name ${host_alias}." 1>&2
exit 1
fi
host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
host=${host_cpu}-${host_vendor}-${host_os}
. ${tmpfile}.hst
if result=`${config_shell} ${configsub} ${target_alias}` ; then
true
else
echo "Unrecognized target system name ${target_alias}." 1>&2
exit 1
fi
target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
target=${target_cpu}-${target_vendor}-${target_os}
. ${tmpfile}.tgt
# Find the source files, if location was not specified.
case "${srcdir}" in
"")
srcdirdefaulted=1
srcdir=.
if [ ! -r ${srctrigger} ] ; then
srcdir=..
fi
;;
*) ;;
esac
if [ ! -r ${srcdir}/${srctrigger} ] ; then
case "${srcdirdefaulted}" in
"") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
*) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
esac
echo '***' \(At least ${srctrigger} is missing.\) 1>&2
exit 1
fi
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='$(exec_prefix)'/${target_alias}
if [ "${host_alias}" != "${target_alias}" ] ; then
if [ "${program_prefixoption}" = "" ] ; then
if [ "${program_suffixoption}" = "" ] ; then
if [ "${program_transform_nameoption}" = "" ] ; then
program_prefix=${target_alias}- ;
fi
fi
fi
fi
# Merge program_prefix and program_suffix onto program_transform_name.
# (program_suffix used to use $, but it's hard to preserve $ through both
# make and sh.)
if [ "${program_suffix}" != "" ] ; then
program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
fi
if [ "${program_prefix}" != "" ] ; then
program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
fi
# If CC and CXX are not set in the environment, and the Makefile
# exists, try to extract them from it. This is to handle running
# ./config.status by hand.
if [ -z "${CC}" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
t loop
/^CC[ ]*=/ s/CC[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
CC=`tail -1 Makefile.cc`
rm -f Makefile.cc
fi
if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
t loop
/^CFLAGS[ ]*=/ s/CFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
CFLAGS=`tail -1 Makefile.cc`
rm -f Makefile.cc
fi
if [ -z "${CXX}" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
t loop
/^CXX[ ]*=/ s/CXX[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
CXX=`tail -1 Makefile.cc`
rm -f Makefile.cc
fi
if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
t loop
/^CXXFLAGS[ ]*=/ s/CXXFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc
CXXFLAGS=`tail -1 Makefile.cc`
rm -f Makefile.cc
fi
# Generate a default definition for YACC. This is used if the makefile can't
# locate bison or byacc in objdir.
for prog in 'bison -y' byacc yacc
do
set dummy $prog; tmp=$2
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/$tmp; then
DEFAULT_YACC="$prog"
break
fi
done
IFS="$save_ifs"
test -n "$DEFAULT_YACC" && break
done
# Generate a default definition for M4. This is used if the makefile can't
# locate m4 in objdir.
for prog in gm4 gnum4 m4
do
set dummy $prog; tmp=$2
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/$tmp; then
DEFAULT_M4="$prog"
break
fi
done
IFS="$save_ifs"
test -n "$DEFAULT_M4" && break
done
# Generate a default definition for LEX. This is used if the makefile can't
# locate flex in objdir.
for prog in flex lex
do
set dummy $prog; tmp=$2
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/$tmp; then
DEFAULT_LEX="$prog"
break
fi
done
IFS="$save_ifs"
test -n "$DEFAULT_LEX" && break
done
if [ "${build}" != "${host}" ]; then
# If we are doing a Canadian Cross, in which the host and build systems
# are not the same, we set reasonable default values for the tools.
tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET"
tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
for var in ${tools}; do
if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
t loop
/^'"${var}"'[ ]*=/ s/'"${var}"'[ ]*=[ ]*\(.*\)/\1/p' \
< Makefile > Makefile.v
t=`tail -1 Makefile.v`
if [ -n "${t}" ]; then
eval "${var}='${t}'"
fi
rm -f Makefile.v
fi
done
AR=${AR-${host_alias}-ar}
AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar}
AS=${AS-${host_alias}-as}
AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as}
BISON=${BISON-bison}
CC=${CC-${host_alias}-gcc}
CFLAGS=${CFLAGS-"-g -O2"}
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
HOST_PREFIX=${build_alias}-
HOST_PREFIX_1=${build_alias}-
LD=${LD-${host_alias}-ld}
LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
MAKEINFO=${MAKEINFO-makeinfo}
NM=${NM-${host_alias}-nm}
NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm}
RANLIB=${RANLIB-${host_alias}-ranlib}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
WINDRES=${WINDRES-${host_alias}-windres}
WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
if [ -z "${YACC}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/bison; then
YACC="bison -y"
break
fi
if test -f $dir/byacc; then
YACC=byacc
break
fi
if test -f $dir/yacc; then
YACC=yacc
break
fi
done
IFS="$save_ifs"
if [ -z "${YACC}" ]; then
YACC="bison -y"
fi
fi
if [ -z "${LEX}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/flex; then
LEX=flex
break
fi
if test -f $dir/lex; then
LEX=lex
break
fi
done
IFS="$save_ifs"
LEX=${LEX-flex}
fi
# Export variables which autoconf might try to set.
export AS
export AR
export CC_FOR_BUILD
export DLLTOOL
export LD
export NM
export RANLIB
export WINDRES
else
# If CC is still not set, try to get gcc.
if [ -z "${CC}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
for dir in $PATH; do
test -z "$dir" && dir=.
if test -f $dir/gcc; then
CC="gcc"
echo 'void f(){}' > conftest.c
if test -z "`${CC} -g -c conftest.c 2>&1`"; then
CFLAGS=${CFLAGS-"-g -O2"}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
else
CFLAGS=${CFLAGS-"-O2"}
CXXFLAGS=${CXXFLAGS-"-O2"}
fi
rm -f conftest*
break
fi
done
IFS="$save_ifs"
CC=${CC-cc}
else
if test -z "${CFLAGS}"; then
# Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
# is set to a version of gcc.
case "${CC}" in
*gcc)
echo 'void f(){}' > conftest.c
if test -z "`${CC} -g -c conftest.c 2>&1`"; then
CFLAGS=${CFLAGS-"-g -O2"}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
else
CFLAGS=${CFLAGS-"-O2"}
CXXFLAGS=${CXXFLAGS-"-O2"}
fi
rm -f conftest*
;;
esac
fi
fi
CXX=${CXX-"c++"}
CFLAGS=${CFLAGS-"-g"}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
fi
export CC
export CXX
export CFLAGS
export CXXFLAGS
for subdir in . ${subdirs} ; do
# ${subdir} is relative path from . to the directory we're currently
# configuring.
# ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
### figure out what to do with srcdir
case "${srcdir}" in
".") # no -srcdir option. We're building in place.
makesrcdir=. ;;
/*) # absolute path
makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
;;
*) # otherwise relative
case "${subdir}" in
.) makesrcdir=${srcdir} ;;
*) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
esac
;;
esac
if [ "${subdir}/" != "./" ] ; then
Makefile=${subdir}/Makefile
fi
if [ ! -d ${subdir} ] ; then
if mkdir ${subdir} ; then
true
else
echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
exit 1
fi
fi
case "${removing}" in
"")
case "${subdir}" in
.) ;;
*) eval echo Building in ${subdir} ${redirect} ;;
esac
# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
# Set up the list of links to be made.
# ${links} is the list of link names, and ${files} is the list of names to link to.
# Make the links.
configlinks="${links}"
if [ -r ${subdir}/config.status ] ; then
mv -f ${subdir}/config.status ${subdir}/config.back
fi
while [ -n "${files}" ] ; do
# set file to car of files, files to cdr of files
set ${files}; file=$1; shift; files=$*
set ${links}; link=$1; shift; links=$*
if [ ! -r ${srcdir}/${file} ] ; then
if [ ! -r ${file} ] ; then
echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
exit 1
else
srcfile=${file}
fi
else
srcfile=${srcdir}/${file}
fi
${remove} -f ${link}
# Make a symlink if possible, otherwise try a hard link
if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
true
else
# We need to re-remove the file because Lynx leaves a
# very strange directory there when it fails an NFS symlink.
${remove} -r -f ${link}
${hard_link} ${srcfile} ${link}
fi
if [ ! -r ${link} ] ; then
echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
exit 1
fi
echo "Linked \"${link}\" to \"${srcfile}\"."
done
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
case ${srcdir} in
.) ;;
*) cat > ${subdir}/.gdbinit <<EOF
# ${NO_EDIT}
dir ${makesrcdir}
dir .
source ${makesrcdir}/.gdbinit
EOF
;;
esac
fi
# Install a makefile, and make it set VPATH
# if necessary so that the sources are found.
# Also change its value of srcdir.
# NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
# been somewhat optimized and is perhaps a bit twisty.
# code is order so as to try to sed the smallest input files we know.
# so do these separately because I don't trust the order of sed -e expressions.
# the five makefile fragments MUST end up in the resulting Makefile in this order:
# package macros, target, host, site, and package rules.
if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
# Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
rm -f ${subdir}/${Makefile}.tem
case "${package_makefile_rules_frag}" in
"") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
*)
if [ ! -f ${package_makefile_rules_frag} ] ; then
package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
fi
if [ -f ${package_makefile_rules_frag} ] ; then
sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
else
echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
echo '***' is missing in ${PWD=`pwd`}. 1>&2
cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
fi
esac
# working copy now in ${Makefile}.tem
# Conditionalize for this site.
rm -f ${Makefile}
case "${site}" in
"") mv ${subdir}/Makefile.tem ${Makefile} ;;
*)
site_makefile_frag=${srcdir}/config/ms-${site}
if [ -f ${site_makefile_frag} ] ; then
sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \
> ${Makefile}
else
mv ${subdir}/Makefile.tem ${Makefile}
site_makefile_frag=
fi
;;
esac
# working copy now in ${Makefile}
# Conditionalize the makefile for this host.
rm -f ${subdir}/Makefile.tem
case "${host_makefile_frag}" in
"") mv ${Makefile} ${subdir}/Makefile.tem ;;
*)
if [ ! -f ${host_makefile_frag} ] ; then
host_makefile_frag=${srcdir}/${host_makefile_frag}
fi
if [ -f ${host_makefile_frag} ] ; then
sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
else
echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
echo '***' is missing in ${PWD=`pwd`}. 1>&2
mv ${Makefile} ${subdir}/Makefile.tem
fi
esac
# working copy now in ${subdir)/Makefile.tem
# Conditionalize the makefile for this target.
rm -f ${Makefile}
case "${target_makefile_frag}" in
"") mv ${subdir}/Makefile.tem ${Makefile} ;;
*)
if [ ! -f ${target_makefile_frag} ] ; then
target_makefile_frag=${srcdir}/${target_makefile_frag}
fi
if [ -f ${target_makefile_frag} ] ; then
sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
else
mv ${subdir}/Makefile.tem ${Makefile}
target_makefile_frag=
fi
;;
esac
# working copy now in ${Makefile}
# Emit the default values of this package's macros.
rm -f ${subdir}/Makefile.tem
case "${package_makefile_frag}" in
"") mv ${Makefile} ${subdir}/Makefile.tem ;;
*)
if [ ! -f ${package_makefile_frag} ] ; then
package_makefile_frag=${srcdir}/${package_makefile_frag}
fi
if [ -f ${package_makefile_frag} ] ; then
sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
else
echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
echo '***' is missing in ${PWD=`pwd`}. 1>&2
mv ${Makefile} ${subdir}/Makefile.tem
fi
esac
# real copy now in ${subdir}/Makefile.tem
# prepend warning about editting, and a bunch of variables.
rm -f ${Makefile}
cat > ${Makefile} <<EOF
# ${NO_EDIT}
VPATH = ${makesrcdir}
links = ${configlinks}
host_alias = ${host_alias}
host_cpu = ${host_cpu}
host_vendor = ${host_vendor}
host_os = ${host_os}
host_canonical = ${host_cpu}-${host_vendor}-${host_os}
target_alias = ${target_alias}
target_cpu = ${target_cpu}
target_vendor = ${target_vendor}
target_os = ${target_os}
target_canonical = ${target_cpu}-${target_vendor}-${target_os}
EOF
case "${build}" in
"") ;;
*) cat >> ${Makefile} << EOF
build_alias = ${build_alias}
build_cpu = ${build_cpu}
build_vendor = ${build_vendor}
build_os = ${build_os}
build_canonical = ${build_cpu}-${build_vendor}-${build_os}
EOF
esac
case "${package_makefile_frag}" in
"") ;;
/*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
*) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
esac
case "${target_makefile_frag}" in
"") ;;
/*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
*) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
esac
case "${host_makefile_frag}" in
"") ;;
/*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
*) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
esac
if [ "${site_makefile_frag}" != "" ] ; then
echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
fi
# provide a proper gxx_include_dir to all subdirs.
# Note, if you change the default, make sure to fix both here
# and in the gcc subdirectory.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
case "${with_gxx_include_dir}" in
yes )
echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2
exit 1
;;
no )
;;
* )
gxx_include_dir=${with_gxx_include_dir}
;;
esac
fi
if test x${gxx_include_dir} = x; then
if test x${enable_version_specific_runtime_libs} = xyes; then
echo gxx_include_dir = '${libsubdir}/include/g++' >> ${Makefile}
else
. ${topsrcdir}/config.if
echo gxx_include_dir = '${prefix}/include/g++'-${libstdcxx_interface} >> ${Makefile}
fi
else
echo gxx_include_dir = ${gxx_include_dir} >> ${Makefile}
fi
# record if we want to build shared libs.
if test -z "${enable_shared}"; then
echo enable_shared = no >> ${Makefile}
else
echo enable_shared = ${enable_shared} >> ${Makefile}
fi
# record if we want to rumtime library stuff installed in libsubdir.
if test -z "${enable_version_specific_runtime_libs}"; then
echo enable_version_specific_runtime_libs = no >> ${Makefile}
else
echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
fi
# Emit a macro which describes the file containing gcc's
# version number.
echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
# And emit a macro defining gcc's version number.
echo gcc_version = ${gcc_version} >> ${Makefile}
# reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
# remove any form feeds.
if [ -z "${subdirs}" ]; then
rm -f ${subdir}/Makefile.tm2
sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
-e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
rm -f ${subdir}/Makefile.tem
mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
fi
sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \
-e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \
-e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \
-e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \
-e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \
-e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \
-e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \
-e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
-e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \
-e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \
-e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \
-e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
-e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
-e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
-e "/^CC[ ]*=/{
:loop1
/\\\\$/ N
s/\\\\\\n//g
t loop1
s%^CC[ ]*=.*$%CC = ${CC}%
}" \
-e "/^CXX[ ]*=/{
:loop2
/\\\\$/ N
s/\\\\\\n//g
t loop2
s%^CXX[ ]*=.*$%CXX = ${CXX}%
}" \
-e "/^CFLAGS[ ]*=/{
:loop3
/\\\\$/ N
s/\\\\\\n//g
t loop3
s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
}" \
-e "/^CXXFLAGS[ ]*=/{
:loop4
/\\\\$/ N
s/\\\\\\n//g
t loop4
s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
}" \
-e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
-e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
-e "s///" \
-e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
-e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
-e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
-e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
-e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
-e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
${subdir}/Makefile.tem >> ${Makefile}
# If this is a Canadian Cross, preset the values of many more
# tools.
if [ "${build}" != "${host}" ]; then
for var in ${tools}; do
val=`eval 'echo $'"${var}"`
sed -e "/^${var}[ ]*=/{
:loop1
/\\\\$/ N
/\\\\$/ b loop1
s/\\\\\\n//g
s%^${var}[ ]*=.*$%${var} = ${val}%
}" ${Makefile} > ${Makefile}.tem
mv -f ${Makefile}.tem ${Makefile}
done
fi
# final copy now in ${Makefile}
else
echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
fi
rm -f ${subdir}/Makefile.tem
case "${host_makefile_frag}" in
"") using= ;;
*) using="and \"${host_makefile_frag}\"" ;;
esac
case "${target_makefile_frag}" in
"") ;;
*) using="${using} and \"${target_makefile_frag}\"" ;;
esac
case "${site_makefile_frag}" in
"") ;;
*) using="${using} and \"${site_makefile_frag}\"" ;;
esac
newusing=`echo "${using}" | sed 's/and/using/'`
using=${newusing}
echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
. ${tmpfile}.pos
# describe the chosen configuration in config.status.
# Make that file a shellscript which will reestablish
# the same configuration. Used in Makefiles to rebuild
# Makefiles.
case "${norecursion}" in
"") arguments="${arguments} --norecursion" ;;
*) ;;
esac
if [ ${subdir} = . ] ; then
echo "#!/bin/sh
# ${NO_EDIT}
# This directory was configured as follows:
${progname}" ${arguments} "
# ${using}" > ${subdir}/config.new
else
echo "#!/bin/sh
# ${NO_EDIT}
# This directory was configured as follows:
cd ${invsubdir}
${progname}" ${arguments} "
# ${using}" > ${subdir}/config.new
fi
chmod a+x ${subdir}/config.new
if [ -r ${subdir}/config.back ] ; then
mv -f ${subdir}/config.back ${subdir}/config.status
fi
${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
;;
*) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
esac
done
# If there are subdirectories, then recur.
if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then
for configdir in ${configdirs} ${extraconfigdirs} ; do
# If configdir contains ',' it is
# srcdir,builddir,target_alias
# These come from extraconfigdirs.
case ${configdir} in
*,*)
eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'`
;;
*)
cfg_dir=${configdir}
bld_dir=${configdir}
tgt_alias=${target_alias}
;;
esac
if [ -d ${srcdir}/${cfg_dir} ] ; then
eval echo Configuring ${configdir}... ${redirect}
case "${srcdir}" in
".") ;;
*)
if [ ! -d ./${bld_dir} ] ; then
if mkdir ./${bld_dir} ; then
true
else
echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2
exit 1
fi
fi
;;
esac
POPDIR=${PWD=`pwd`}
cd ${bld_dir}
### figure out what to do with srcdir
case "${srcdir}" in
".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
/*) # absolute path
newsrcdir=${srcdir}/${cfg_dir}
srcdiroption="--srcdir=${newsrcdir}"
;;
?:*) # absolute path on win32
newsrcdir=${srcdir}/${cfg_dir}
srcdiroption="--srcdir=${newsrcdir}"
;;
*) # otherwise relative
newsrcdir=../${srcdir}/${cfg_dir}
srcdiroption="--srcdir=${newsrcdir}"
;;
esac
# Handle --cache-file=../XXX
case "${cache_file}" in
"") # empty
;;
/*) # absolute path
cache_file_option="--cache-file=${cache_file}"
;;
?:*) # absolute path on win32
cache_file_option="--cache-file=${cache_file}"
;;
*) # relative path
cache_file_option="--cache-file=../${cache_file}"
;;
esac
### check for guested configure, otherwise fix possibly relative progname
if [ -f ${newsrcdir}/configure ] ; then
recprog=${newsrcdir}/configure
elif [ -f ${newsrcdir}/configure.in ] ; then
case "${progname}" in
/*) recprog=${progname} ;;
?:*) recprog=${progname} ;;
*) recprog=../${progname} ;;
esac
else
eval echo No configuration information in ${cfg_dir} ${redirect}
recprog=
fi
### The recursion line is here.
if [ ! -z "${recprog}" ] ; then
if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
true
else
echo Configure in `pwd` failed, exiting. 1>&2
exit 1
fi
fi
cd ${POPDIR}
fi
done
fi
# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
# and reset the trap handler.
rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
trap 0
exit 0
#
# Local Variables:
# fill-column: 131
# End:
#
# end of configure
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...