sort by:
Revision Author Date Message Commit Date
fb3ff69 Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Fix host userspace gsbase corruption KVM: Correct ordering of ldt reload wrt fs/gs reload 18 November 2010, 17:45:47 UTC
2d42dc3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,ppc: Fix regression in evr register handling kgdb,x86: fix regression in detach handling kdb: fix crash when KDB_BASE_CMD_MAX is exceeded kdb: fix memory leak in kdb_main.c 18 November 2010, 16:24:58 UTC
70b99ef Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Update a BKL related comment powerpc/mm: Fix module instruction tlb fault handling on Book-E 64 powerpc: Fix call to subpage_protection() powerpc: Set CONFIG_32BIT on ppc32 powerpc/mm: Fix build error in setup_initial_memory_limit powerpc/pseries: Don't override CONFIG_PPC_PSERIES_DEBUG powerpc: Fix div64 in bootloader 18 November 2010, 15:38:58 UTC
0f6b77c powerpc: Update a BKL related comment The commit 5e3d20a remove bkl from startup code so setup_arch() it isn't called with bkl held anymore. Update the comment on top of that function. Fix also a typo. This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:24 UTC
82ae5ea powerpc/mm: Fix module instruction tlb fault handling on Book-E 64 We were seeing oops like the following when we did an rmmod on a module: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0x8000000000008010 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P5020 DS last sysfs file: /sys/devices/qman-portals.2/qman-pool.9/uevent Modules linked in: qman_tester(-) NIP: 8000000000008010 LR: c000000000074858 CTR: 8000000000008010 REGS: c00000002e29bab0 TRAP: 0400 Not tainted (2.6.34.6-00744-g2d21f14) MSR: 0000000080029000 <EE,ME,CE> CR: 24000448 XER: 00000000 TASK = c00000007a8be600[4987] 'rmmod' THREAD: c00000002e298000 CPU: 1 GPR00: 8000000000008010 c00000002e29bd30 8000000000012798 c00000000035fb28 GPR04: 0000000000000002 0000000000000002 0000000024022428 c000000000009108 GPR08: fffffffffffffffe 800000000000a618 c0000000003c13c8 0000000000000000 GPR12: 0000000022000444 c00000000fffed00 0000000000000000 0000000000000000 GPR16: 00000000100c0000 0000000000000000 00000000100dabc8 0000000010099688 GPR20: 0000000000000000 00000000100cfc28 0000000000000000 0000000010011a44 GPR24: 00000000100017b2 0000000000000000 0000000000000000 0000000000000880 GPR28: c00000000035fb28 800000000000a7b8 c000000000376d80 c0000000003cce50 NIP [8000000000008010] .test_exit+0x0/0x10 [qman_tester] LR [c000000000074858] .SyS_delete_module+0x1f8/0x2f0 Call Trace: [c00000002e29bd30] [c0000000000748b4] .SyS_delete_module+0x254/0x2f0 (unreliable) [c00000002e29be30] [c000000000000580] syscall_exit+0x0/0x2c Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX 38600000 4e800020 60000000 60000000 <4e800020> 60000000 60000000 60000000 ---[ end trace 4f57124939a84dc8 ]--- This appears to be due to checking the wrong permission bits in the instruction_tlb_miss handling if the address that faulted was in vmalloc space. We need to look at the supervisor execute (_PAGE_BAP_SX) bit and not the user bit (_PAGE_BAP_UX/_PAGE_EXEC). Also removed a branch level since it did not appear to be used. Reported-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:23 UTC
1c2c25c powerpc: Fix call to subpage_protection() In: powerpc/mm: Fix pgtable cache cleanup with CONFIG_PPC_SUBPAGE_PROT commit d28513bc7f675d28b479db666d572e078ecf182d Author: David Gibson <david@gibson.dropbear.id.au> subpage_protection() was changed to to take an mm rather a pgdir but it didn't change calling site in hashpage_preload(). The change wasn't noticed at compile time since hashpage_preload() used a void* as the parameter to subpage_protection(). This is obviously wrong and can trigger the following crash when CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_PPC_64K_PAGES CONFIG_PPC_SUBPAGE_PROT are enabled. Freeing unused kernel memory: 704k freed Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6c49b7 Faulting instruction address: 0xc0000000000410f4 cpu 0x2: Vector: 300 (Data Access) at [c00000004233f590] pc: c0000000000410f4: .hash_preload+0x258/0x338 lr: c000000000041054: .hash_preload+0x1b8/0x338 sp: c00000004233f810 msr: 8000000000009032 dar: 6b6b6b6b6b6c49b7 dsisr: 40000000 current = 0xc00000007e2c0070 paca = 0xc000000007fe0500 pid = 1, comm = init enter ? for help [c00000004233f810] c000000000041020 .hash_preload+0x184/0x338 (unreliable) [c00000004233f8f0] c00000000003ed98 .update_mmu_cache+0xb0/0xd0 [c00000004233f990] c000000000157754 .__do_fault+0x48c/0x5dc [c00000004233faa0] c000000000158fd0 .handle_mm_fault+0x508/0xa8c [c00000004233fb90] c0000000006acdd4 .do_page_fault+0x428/0x6ac [c00000004233fe30] c000000000005260 handle_page_fault+0x20/0x74 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:23 UTC
234a71a powerpc: Set CONFIG_32BIT on ppc32 commit ffe8018c3424892c9590048fc36caa6c3e0c8a76 of the -mm tree fixes the initramfs size calculation for e.g. s390 but breaks it for 32bit architectures which do not define CONFIG_32BIT. This patch fix the problem for PPC32 which will elsewise end up with a __initramfs_size of 0. Signed-off-by: Kerstin Jonsson <kerstin.jonsson@ericsson.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:23 UTC
4a89261 powerpc/mm: Fix build error in setup_initial_memory_limit arch/powerpc/mm/tlb_nohash.c: In function 'setup_initial_memory_limit': arch/powerpc/mm/tlb_nohash.c:588:29: error: 'ppc64_memblock_base' undeclared (first use in this function) arch/powerpc/mm/tlb_nohash.c:588:29: note: each undeclared identifier is reported only once for each function it appears in Due to a copy/paste typo with the following commit: commit cd3db0c4ca3d237e7ad20f7107216e575705d2b0 Author: Benjamin Herrenschmidt <benh@kernel.crashing.org> Date: Tue Jul 6 15:39:02 2010 -0700 memblock: Remove rmo_size, burry it in arch/powerpc where it belongs Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:22 UTC
01cf6fe powerpc/pseries: Don't override CONFIG_PPC_PSERIES_DEBUG EEH and pci_dlpar #undef DEBUG, but I think they were added before the ability to control this from Kconfig. It's really annoying to only get some of the debug messages from these files. Leave the lpar.c #undef alone as it produces so much output as to make the kernel unusable. Update the Kconfig text to indicate this particular quirk :) Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:54:22 UTC
acbfd58 powerpc: Fix div64 in bootloader The code is missing a fix that went into the main kernel variant (we should try to share that code again at some stage) Reported-by: Albert Cahalan <acahalan@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 18 November 2010, 03:39:24 UTC
0a5b871 hardirq.h: remove now-empty #ifdef/#endif pair Commit 451a3c24b013 ("BKL: remove extraneous #include <smp_lock.h>") removed the #include line that was the only thing that was surrounded by the #ifdef/#endif. So now that #ifdef is guarding nothing at all. Just remove it. Reported-by: Byeong-ryeol Kim <brofkims@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2010, 02:36:25 UTC
7957f0a Fix build failure due to hwirq.h needing smp_lock.h Arnd Bergmann did an automated scripting run to find left-over instances of <linux/smp_lock.h>, and had made it trigger it on the normal BKL use of lock_kernel and unlock_lernel (and apparently release_kernel_lock and reacquire_kernel_lock too, used by the scheduler). That resulted in commit 451a3c24b013 ("BKL: remove extraneous #include <smp_lock.h>"). However, hardirq.h was the only remaining user of the old 'kernel_locked()' interface, and Arnd's script hadn't checked for that. So depending on your configuration and what header files had been included, you would get errors like "implicit declaration of function 'kernel_locked'" during the build. The right fix is not to just re-instate the smp_lock.h include - it is to just remove 'kernel_locked()' entirely, since the only use was this one special low-level detail. Just make hardirq.h do it directly. In fact this simplifies and clarifies the code, because some trivial analysis makes it clear that hardirq.h only ever used _one_ of the two definitions of kernel_locked(), so we can remove the other one entirely. Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 November 2010, 22:58:36 UTC
c8770e7 KVM: VMX: Fix host userspace gsbase corruption We now use load_gs_index() to load gs safely; unfortunately this also changes MSR_KERNEL_GS_BASE, which we managed separately. This resulted in confusion and breakage running 32-bit host userspace on a 64-bit kernel. Fix by - saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs - doing the host save/load unconditionally, instead of only when in guest long mode Things can be cleaned up further, but this is the minmal fix for now. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 17 November 2010, 21:48:05 UTC
0a77fe4 KVM: Correct ordering of ldt reload wrt fs/gs reload If fs or gs refer to the ldt, they must be reloaded after the ldt. Reorder the code to that effect. Userspace code that uses the ldt with kvm is nonexistent, so this doesn't fix a user-visible bug. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 17 November 2010, 21:47:59 UTC
e3839ed kgdb,ppc: Fix regression in evr register handling Commit ff10b88b5a05c8f1646dd15fb9f6093c1384ff6d (kgdb,ppc: Individual register get/set for ppc) introduced a problem where memcpy was used incorrectly to read and write the evr registers with a kernel that has: CONFIG_FSL_BOOKE=y CONFIG_SPE=y CONFIG_KGDB=y This patch also fixes the following compilation problems: arch/powerpc/kernel/kgdb.c: In function 'dbg_get_reg': arch/powerpc/kernel/kgdb.c:341: error: passing argument 2 of 'memcpy' makes pointer from integer without a cast arch/powerpc/kernel/kgdb.c: In function 'dbg_set_reg': arch/powerpc/kernel/kgdb.c:366: error: passing argument 1 of 'memcpy' makes pointer from integer without a cast [jason.wessel@windriver.com: Remove void * casts and fix patch header] Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: linuxppc-dev@lists.ozlabs.org 17 November 2010, 19:54:58 UTC
10a6e67 kgdb,x86: fix regression in detach handling The fix from ba773f7c510c0b252145933926c636c439889207 (x86,kgdb: Fix hw breakpoint regression) was not entirely complete. The kgdb_remove_all_hw_break() function also needs to call the hw_break_release_slot() or else a breakpoint can get activated again after the debugger has detached. The kgdb test suite exposes the behavior in the form of either a hang or repetitive failure. The kernel config that exposes the problem contains all of the following: CONFIG_DEBUG_RODATA=y CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100" Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> 17 November 2010, 19:54:57 UTC
5450d90 kdb: fix crash when KDB_BASE_CMD_MAX is exceeded When the number of dyanmic kdb commands exceeds KDB_BASE_CMD_MAX, the kernel will fault. Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 17 November 2010, 19:54:57 UTC
85e76ab kdb: fix memory leak in kdb_main.c Call kfree in the error path as well as the success path in kdb_ll(). Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 17 November 2010, 19:54:57 UTC
460781b BKL: remove references to lock_kernel from comments Lock_kernel is gone from the code, so the comments should be updated, too. nfsd now uses lock_flocks instead of lock_kernel to protect against posix file locks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: J. Bruce Fields <bfields@redhat.com> Cc: linux-nfs@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 November 2010, 16:59:32 UTC
451a3c2 BKL: remove extraneous #include <smp_lock.h> The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 November 2010, 16:59:32 UTC
55f6561 staging/stradis: mark as "depends on BKL" The stradis driver is on its way out, but it should still be marked correctly as depending on the big kernel lock. It could easily be changed to not require it if someone decides to revive the driver and port it to v4l2 in the process. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Sedat Dilek <sedat.dilek@googlemail.com> Cc: Nathan Laredo <laredo@gnu.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 November 2010, 16:59:32 UTC
59365d1 kernel: make /proc/kallsyms mode 400 to reduce ease of attacking Making /proc/kallsyms readable only for root by default makes it slightly harder for attackers to write generic kernel exploits by removing one source of knowledge where things are in the kernel. This is the second submit, discussion happened on this on first submit and mostly concerned that this is just one hole of the sieve ... but one of the bigger ones. Changing the permissions of at least System.map and vmlinux is also required to fix the same set, but a packaging issue. Target of this starter patch and follow ups is removing any kind of kernel space address information leak from the kernel. [ Side note: the default of root-only reading is the "safe" value, and it's easy enough to then override at any time after boot. The /proc filesystem allows root to change the permissions with a regular chmod, so you can "revert" this at run-time by simply doing chmod og+r /proc/kallsyms as root if you really want regular users to see the kernel symbols. It does help some tools like "perf" figure them out without any setup, so it may well make sense in some situations. - Linus ] Signed-off-by: Marcus Meissner <meissner@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Eugene Teo <eugeneteo@kernel.org> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 November 2010, 03:06:01 UTC
1d66365 Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: nfs: Ignore kmemleak false positive in nfs_readdir_make_qstr SUNRPC: Simplify rpc_alloc_iostats by removing pointless local variable nfs: trivial: remove unused nfs_wait_event macro NFS: readdir shouldn't read beyond the reply returned by the server NFS: Fix a couple of regressions in readdir. Revert "NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR" Regression: fix mounting NFS when NFSv3 support is not compiled NLM: Fix a regression in lockd 17 November 2010, 02:46:28 UTC
d33fdee Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix cross-sched-class wakeup preemption sched: Fix runnable condition for stoptask sched: Use group weight, idle cpu metrics to fix imbalances during idle 16 November 2010, 23:20:05 UTC
1e8703b Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / PM QoS: Fix reversed min and max PM / OPP: Hide OPP configuration when SoCs do not provide an implementation PM: Allow devices to be removed during late suspend and early resume 16 November 2010, 23:18:17 UTC
4531491 Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Address compiler warnings in exit_robust_list 16 November 2010, 22:31:03 UTC
f281233 SCSI host lock push-down Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 November 2010, 21:33:23 UTC
bdbd01a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix offset check for sysfs mmapped files 16 November 2010, 18:51:56 UTC
2ebc8ec Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] kprobes: Fix the return address of multiple kretprobes [S390] kprobes: disable interrupts throughout [S390] ftrace: build without frame pointers on s390 [S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking [S390] vmlogrdr: purge after recording is switched off [S390] cio: fix incorrect ccw_device_init_count [S390] tape: add medium state notifications [S390] fix get_user_pages_fast 16 November 2010, 17:27:13 UTC
8c05cd0 PCI: fix offset check for sysfs mmapped files I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts. Running an strace of the X server shows that it's doing this: open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10 mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument) This code seems to be asking for a shared read/write mapping of 16MB worth of BAR0 starting at file offset 0, and letting the kernel assign a starting address. Unfortunately, this -EINVAL causes X not to start. Looking into dmesg, there's a complaint like so: process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x 96000000, size 0x 1000000) ...with the following code in pci_mmap_fits: pci_start = (mmap_api == PCI_MMAP_SYSFS) ? pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; if (start >= pci_start && start < pci_start + size && start + nr <= pci_start + size) It looks like the logic here is set up such that when the mmap call comes via sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the resource's start and end address, and the end of the vma to be no farther than the end. However, the sysfs PCI resource files always start at offset zero, which means that this test always fails for programs that mmap the sysfs files. Given the comment in the original commit 3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files require that the file offset be equal to the resource's base address when mmapping. I think what we want here is for pci_start to be 0 when mmap_api == PCI_MMAP_PROCFS. The following patch makes that change, after which the Matrox and Mach64 X drivers work again. Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 16 November 2010, 17:15:39 UTC
04e4bd1 nfs: Ignore kmemleak false positive in nfs_readdir_make_qstr Strings allocated via kmemdup() in nfs_readdir_make_qstr() are referenced from the nfs_cache_array which is stored in a page cache page. Kmemleak does not scan such pages and it reports several false positives. This patch annotates the string->name pointer so that kmemleak does not consider it a real leak. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 17:03:14 UTC
94f58df SUNRPC: Simplify rpc_alloc_iostats by removing pointless local variable Hi, We can simplify net/sunrpc/stats.c::rpc_alloc_iostats() a bit by getting rid of the unneeded local variable 'new'. Please CC me on replies. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 16:58:51 UTC
5685b97 nfs: trivial: remove unused nfs_wait_event macro Nothing uses this macro anymore. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 16:56:24 UTC
df6e61d kernel/sysctl.c: Fix build failure with !CONFIG_PRINTK Sigh... Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 November 2010, 15:56:09 UTC
e53beac Linux 2.6.37-rc2 16 November 2010, 02:31:02 UTC
ac39612 NFS: readdir shouldn't read beyond the reply returned by the server Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 01:44:29 UTC
8cd51a0 NFS: Fix a couple of regressions in readdir. Fix up the issue that array->eof_index needs to be able to be set even if array->size == 0. Ensure that we catch all important memory allocation error conditions and/or kmap() failures. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 01:44:28 UTC
23ebbd9 Revert "NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR" This reverts commit 80e60639f1b7c121a7fea53920c5a4b94009361a. This change requires further fixes to ensure that the open doesn't succeed if the lookup later results in a regular file being created. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 01:44:27 UTC
1e657bd Regression: fix mounting NFS when NFSv3 support is not compiled Trying to mount NFS (root partition in my case) fails if CONFIG_NFS_V3 is not selected. nfs_validate_mount_data() returns EPROTONOSUPPORT, because of this check: #ifndef CONFIG_NFS_V3 if (args->version == 3) goto out_v3_not_compiled; #endif /* !CONFIG_NFS_V3 */ and args->version was always initialized to 3. It was working in 2.6.36 Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 01:44:27 UTC
8e35f8e NLM: Fix a regression in lockd Nick Bowler reports: There are no unusual messages on the client... but I just logged into the server and I see lots of messages of the following form: nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! Bisected to commit 9247685088398cf21bcb513bd2832b4cd42516c4 (SUNRPC: Properly initialize sock_xprt.srcaddr in all cases) Apparently, removing the 'transport->srcaddr.ss_family = family' from xs_create_sock() triggers this due to nlmclnt_lookup_host() incorrectly initialising the srcaddr family to AF_UNSPEC. Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 16 November 2010, 01:44:26 UTC
12b3052 capabilities/syslog: open code cap_syslog logic to fix build failure The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build failure when CONFIG_PRINTK=n. This is because the capabilities code which used the new option was built even though the variable in question didn't exist. The patch here fixes this by moving the capabilities checks out of the LSM and into the caller. All (known) LSMs should have been calling the capabilities hook already so it actually makes the code organization better to eliminate the hook altogether. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 November 2010, 23:40:01 UTC
6800e4c Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap1: devices: need to return with a value OMAP1: camera.h: add missing include omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts OMAP2: Devkit8000: Fix mmc regulator failure 15 November 2010, 22:06:11 UTC
477d4e4 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch 15 November 2010, 22:05:44 UTC
fe9d115 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata 15 November 2010, 22:03:17 UTC
e5c1353 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area 15 November 2010, 22:01:33 UTC
00fafcd PM / PM QoS: Fix reversed min and max pm_qos_get_value had min and max reversed, causing all pm_qos requests to have no effect. Signed-off-by: Colin Cross <ccross@android.com> Acked-by: mark <markgross@thegnar.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org 15 November 2010, 21:45:22 UTC
2236baa i2c: Sanity checks on adapter registration Make sure I2C adapters being registered have the required struct fields set. If they don't, problems will happen later. Signed-off-by: Jean Delvare <khali@linux-fr.org> 15 November 2010, 21:40:38 UTC
e1e18ee i2c: Mark i2c_adapter.id as deprecated It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> 15 November 2010, 21:40:38 UTC
f3dc65d i2c: Drivers shouldn't include <linux/i2c-id.h> Drivers don't need to include <linux/i2c-id.h>, especially not when they don't use anything that header file provides. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Hunold <michael@mihu.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> 15 November 2010, 21:40:38 UTC
dfdee5f i2c: Delete unused adapter IDs Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> 15 November 2010, 21:40:38 UTC
dc6641b i2c: Remove obsolete cleanup for clientdata A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> 15 November 2010, 21:40:38 UTC
968ab18 include/linux/kernel.h: Move logging bits to include/linux/printk.h Move the logging bits from kernel.h into printk.h so that there is a bit more logical separation of the generic from the printk logging specific parts. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 November 2010, 21:37:37 UTC
22d3243 Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again) The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets clobbered") to work around the gcc miscompiling i8k.c to add "+m (*regs)" caused register pressure problems and a build failure. Changing the 'asm' statement to 'asm volatile' instead should prevent that and works around the gcc bug as well, so we can remove the "+m". [ Background on the gcc bug: a memory clobber fails to mark the function the asm resides in as non-pure (aka "__attribute__((const))"), so if the function does nothing else that triggers the non-pure logic, gcc will think that that function has no side effects at all. As a result, callers will be mis-compiled. Adding the "+m" made gcc see that it's not a pure function, and so does "asm volatile". The problem was never really the need to mark "*regs" as changed, since the memory clobber did that part - the problem was just a bug in the gcc "pure" function analysis - Linus ] Signed-off-by: Jim Bos <jim876@xs4all.nl> Acked-by: Jakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 November 2010, 21:27:06 UTC
52d159e hwmon: (w83795) Check for BEEP pin availability On the W83795ADG, there's a single pin for BEEP and OVT#, so you can't have both. Check the configuration and don't create beep attributes when BEEP pin is not available. The W83795G has a dedicated BEEP pin so the functionality is always available there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:57 UTC
793c51d hwmon: (w83795) Clear intrusion alarm immediately When asked to clear the intrusion alarm, do so immediately. We have to invalidate the cache to make sure the new status will be read. But we also have to read from the status register once to clear the pending alarm, as writing to CLR_CHS surprising won't clear it automatically. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:57 UTC
cf6b9ea hwmon: (w83795) Read the intrusion state properly We can't read the intrusion state from the real-time alarm registers as we do for all other alarm flags, because real-time alarm bits don't stick (by definition) and the intrusion state has to stick until explicitly cleared (otherwise it has little value.) So we have to use the interrupt status register instead, which is read from the same address but with a configuration bit flipped in another register. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:56 UTC
2a2d27d hwmon: (w83795) Print the actual temperature channels as sources Don't expose raw register values to user-space. Decode and encode temperature channels selected as temperature sources as needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:56 UTC
edff2f8 hwmon: (w83795) List all usable temperature sources Temperature sources are not correlated directly with temperature channels. A look-up table is required to find out which temperature sources can be used depending on which temperature channels (both analog and digital) are enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:56 UTC
d5ab845 hwmon: (w83795) Expose fan control method Expose fan control method (DC vs. PWM) using the standard sysfs attributes. I've made it read-only as the board should be wired for a given mode, the BIOS should have set up the chip for this mode, and you shouldn't have to change it. But it would be easy enough to make it changeable if someone comes up with a use case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:56 UTC
ae51cd9 hwmon: (w83795) Fix fan control mode attributes There were two bugs: * Speed cruise mode was improperly reported for all fans but fan1. * Fan control method (PWM vs. DC) was mixed with the control mode. It will be added back as a separate attribute, as per the standard sysfs interface. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> 15 November 2010, 20:38:56 UTC
61ec2da hwmon: (lm95241) Check validity of input values This clears the following build-time warnings I was seeing: drivers/hwmon/lm95241.c: In function "set_interval": drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max2": drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max1": drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min2": drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min1": drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type2": drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type1": drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result This also fixes a small race in set_interval() as a side effect: by working with a temporary local variable we prevent data->interval from being accessed at a time it contains the interval value in the wrong unit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Davide Rizzo <elpa.rizzo@gmail.com> 15 November 2010, 20:38:56 UTC
2aa25c2 hwmon: Change mail address of Hans J. Koch My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> 15 November 2010, 20:38:56 UTC
e25cd06 PCI: sysfs: fix printk warnings Cast pci_resource_start() and pci_resource_len() to u64 for printk. drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t' drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 15 November 2010, 17:34:44 UTC
620751a Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix inode deallocation race 15 November 2010, 16:43:29 UTC
f187a45 Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings 15 November 2010, 16:43:04 UTC
7023166 Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fsl-diu-fb: drop dead ioctl define MAINTAINERS: Add an fbdev git tree entry. OMAP: DSS: Fix documentation regarding 'vram' kernel parameter OMAP: VRAM: Fix boot-time memory allocation OMAP: VRAM: improve VRAM error prints sisfb: limit POST memory test according to PCI resource length fbdev: sh_mobile_lcdc: use correct number of modes, when using the default fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug 15 November 2010, 16:42:07 UTC
58e89c2 Merge branches 'sh-fixes-for-linus' and 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: intc: Fix up build failure introduced by radix tree changes. MAINTAINERS: update the sh git tree entry. sh: clkfwk: fix up compiler warnings. sh: intc: Fix up initializers for gcc 4.5. rtc: rtc-sh - fix a memory leak * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate MAINTAINERS: update the ARM SH-Mobile git tree entry. ARM: mach-shmobile: ap4evb: Mark NOR boot loader partitions read-only. ARM: mach-shmobile: intc-sh7372: fix interrupt number 15 November 2010, 16:41:30 UTC
044b941 GFS2: Fix inode deallocation race This area of the code has always been a bit delicate due to the subtleties of lock ordering. The problem is that for "normal" alloc/dealloc, we always grab the inode locks first and the rgrp lock later. In order to ensure no races in looking up the unlinked, but still allocated inodes, we need to hold the rgrp lock when we do the lookup, which means that we can't take the inode glock. The solution is to borrow the technique already used by NFS to solve what is essentially the same problem (given an inode number, look up the inode carefully, checking that it really is in the expected state). We cannot do that directly from the allocation code (lock ordering again) so we give the job to the pre-existing delete workqueue and carry on with the allocation as normal. If we find there is no space, we do a journal flush (required anyway if space from a deallocation is to be released) which should block against the pending deallocations, so we should always get the space back. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 15 November 2010, 12:44:42 UTC
c8f3678 Merge branch 'rmobile/core' into rmobile-fixes-for-linus 15 November 2010, 05:47:16 UTC
574490e ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate Tested-by: Tony SIM <chinyeow.sim.xt@renesas.com> Tested-by: TAKEI Mitsuharu <takei.andr@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 15 November 2010, 05:46:38 UTC
6318af9 sh: intc: Fix up build failure introduced by radix tree changes. The radix tree retry logic got a bit of an overhaul and subsequently broke the virtual IRQ subgroup build. Simply switch over to radix_tree_deref_retry() as per the filemap changes, which the virq lookup logic was modelled after in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 15 November 2010, 05:30:30 UTC
344ac14 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/urgent 15 November 2010, 04:54:00 UTC
dce1431 fsl-diu-fb: drop dead ioctl define The fsl-diu-fb driver no longer uses this define, and we have a common one to cover this already (FBIO_WAITFORVSYNC). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 15 November 2010, 04:49:51 UTC
fc5fef5 MAINTAINERS: Add an fbdev git tree entry. Now that there's an fbdev git tree (this is also what is pulled in to -next), stub it in to the MAINTAINERS entry. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 15 November 2010, 04:25:31 UTC
2744b88 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix slub_lock down/up imbalance 14 November 2010, 21:06:37 UTC
1ca7318 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Change some lock status member in ocfs2_lock_res to char. 14 November 2010, 21:04:53 UTC
68cee4f slub: Fix slub_lock down/up imbalance There are two places, that do not release the slub_lock. Respective bugs were introduced by sysfs changes ab4d5ed5 (slub: Enable sysfs support for !CONFIG_SLUB_DEBUG) and 2bce6485 ( slub: Allow removal of slab caches during boot). Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> 14 November 2010, 14:53:11 UTC
0143832 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: drivers/pcmcia/soc_common.c: Use printf extension %pV pcmcia: fix warning in synclink driver pcmcia/sa1100: don't put machine specific init functions in .init.text pcmcia/cm4000: fix error code pd6729: Coding Style fixes 13 November 2010, 18:00:15 UTC
f8b372a Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang" This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd. Crashes any x86 serial console bootup: Console: colour VGA+ 80x25 BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 ... Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 November 2010, 17:59:19 UTC
c0caf7b Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - Fix AES-CBC handling on odd-block-sized input crypto: n2 - dubious error check 13 November 2010, 17:55:56 UTC
c22cff0 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] soc-camera: Compile fixes for mx2-camera [media] SoC Camera: ov6650: minor cleanups [media] SOC Camera: OMAP1: typo fix [media] SoC Camera: OMAP1: update for recent videobuf changes [media] SoC Camera: OMAP1: update for recent framework changes [media] ARM mx3_camera: check for DMA engine type [media] tm6000: bugfix set tv standards [media] cafe_ccic: fix subdev configuration [media] saa7134: Fix autodetect for Behold A7 and H7 TV cards [media] v4l: kill the BKL [media] BZ#22292: dibx000_common: Restore i2c algo pointer 13 November 2010, 17:55:19 UTC
6b4e81d i8k: Tell gcc that *regs gets clobbered More recent GCC caused the i8k driver to stop working, on Slackware compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't work anymore, meaning the driver didn't load or gave total nonsensical output. As it turned out the asm(..) statement forgot to mention it modifies the *regs variable. Credits to Andi Kleen and Andreas Schwab for providing the fix. Signed-off-by: Jim Bos <jim876@xs4all.nl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 November 2010, 17:54:43 UTC
ed3aada ACPI: debugfs custom_method open to non-root Currently we have: --w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method which is just crazy. Change this to --w-------. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@kernel.org (for 2.6.36) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 November 2010, 17:52:16 UTC
1c66b36 ocfs2: Change some lock status member in ocfs2_lock_res to char. Commit 83fd9c7 changes l_level, l_requested and l_blocking of ocfs2_lock_res from int to unsigned char. But actually it is initially as -1(ocfs2_lock_res_init_common) which correspoding to 255 for unsigned char. So the whole dlm lock mechanism doesn't work now which means a disaster to ocfs2. Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 13 November 2010, 11:15:08 UTC
754961a ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings This patch fixes followng build warnings. warning: (ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>) selects HAVE_S3C_RTC which has unmet direct dependencies (RTC_CLASS) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 13 November 2010, 07:30:52 UTC
20676c1 ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings This patch fixes following warnings. warning: (ARCH_S3C2410 && <choice> || ARCH_S3C64XX && <choice> || ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>) selects HAVE_S3C2410_I2C which has unmet direct dependencies (I2C) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 13 November 2010, 07:30:44 UTC
c39d8d5 ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings Fix build warnings warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice> && WATCHDOG || ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 && <choice> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410 && ARCH_S3C64XX) selects HAVE_S3C2410_WATCHDOG which has unmet direct dependencies (WATCHDOG) Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: Added fix same warning(mach-s3c64xx/Kconfig)] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 13 November 2010, 07:30:29 UTC
9457b24 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) can-bcm: fix minor heap overflow gianfar: Do not call device_set_wakeup_enable() under a spinlock ipv6: Warn users if maximum number of routes is reached. docs: Add neigh/gc_thresh3 and route/max_size documentation. axnet_cs: fix resume problem for some Ax88790 chip ipv6: addrconf: don't remove address state on ifdown if the address is being kept tcp: Don't change unlocked socket state in tcp_v4_err(). x25: Prevent crashing when parsing bad X.25 facilities cxgb4vf: add call to Firmware to reset VF State. cxgb4vf: Fail open if link_start() fails. cxgb4vf: flesh out PCI Device ID Table ... cxgb4vf: fix some errors in Gather List to skb conversion cxgb4vf: fix bug in Generic Receive Offload cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue() ixgbe: Look inside vlan when determining offload protocol. bnx2x: Look inside vlan when determining checksum proto. vlan: Add function to retrieve EtherType from vlan packets. virtio-net: init link state correctly ucc_geth: Fix deadlock ucc_geth: Do not bring the whole IF down when TX failure. ... 13 November 2010, 01:17:55 UTC
80ef913 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/pata_octeon_cf.c: delete double assignment pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test libata: fix NULL sdev dereference race in atapi_qc_complete() 13 November 2010, 01:17:09 UTC
1c32ca9 Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits) Revert "staging: tidspbridge: replace iommu custom for opensource implementation" Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c" Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name" Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c" Revert "staging: tidspbridge - fix mmufault support" Revert "staging: tidspbridge - remove hw directory" Revert "staging: tidspbridge - move all iommu related code to a new file" Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct" Revert "staging: tidspbridge - remove reserved memory clean up" Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions" Revert "staging: tidspbridge - remove dmm custom module" Revert "staging: tidspbridge - update Kconfig to select IOMMU module" staging: tidspbridge: hardcode SCM macros while fix is upstreamed Staging: keucr driver: fix uninitialized variable & proper memset length omap: dsp: remove shm from normal memory Staging: wlan-ng: Fix wrong #ifdef #endif sequence Staging: Update parameters for cfg80211 key management operation Staging: ath6kl: Fix pointer casts on 64-bit architectures Staging: batman-adv: suppress false warning when changing the mac address Staging: batman-adv: fix interface alternating and bonding reggression ... 13 November 2010, 01:14:20 UTC
00dad7f Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits) Revert "USB: xhci: Use GFP_ATOMIC under spin_lock" USB: ohci-jz4740: Fix spelling in MODULE_ALIAS UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails usb: core: fix information leak to userland usb: misc: iowarrior: fix information leak to userland usb: misc: sisusbvga: fix information leak to userland usb: subtle increased memory usage in u_serial USB: option: fix when the driver is loaded incorrectly for some Huawei devices. USB: xhci: Use GFP_ATOMIC under spin_lock usb: gadget: goku_udc: add registered flag bit, fixing build USB: ehci/mxc: compile fix USB: Fix FSL USB driver on non Open Firmware systems USB: the development of the usb tree is now in git usb: musb: fail unaligned DMA transfers on v1.8 and above USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial usb.h: fix ioctl kernel-doc info usb: musb: gadget: kill duplicate code in musb_gadget_queue() usb: musb: Fix handling of spurious SESSREQ usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time USB: musb: blackfin: push clkin value to platform resources ... 13 November 2010, 01:13:28 UTC
edaa4d6 Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: Fix length handling n_gsm: Copy n2 over when configuring via ioctl interface serial: bfin_5xx: grab port lock before making port termios changes serial: bfin_5xx: disable CON_PRINTBUFFER for consoles serial: bfin_5xx: remove redundant SSYNC to improve TX speed serial: bfin_5xx: always include DMA headers vcs: make proper usage of the poll flags amiserial: Remove unused variable icount 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang tty_ldisc: Fix BUG() on hangup TTY: restore tty_ldisc_wait_idle SERIAL: blacklist si3052 chip drivers/serial/bfin_5xx.c: Fix line continuation defects tty: prevent DOS in the flush_to_ldisc 8250: add support for Kouwell KW-L221N-2 nozomi: Fix warning from the previous TIOCGCOUNT changes tty: fix warning in synclink driver tty: Fix formatting in tty.h tty: the development tree is now done in git 13 November 2010, 00:02:30 UTC
891cbd3 Merge branch 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: do not release any memory under 1M in domain 0 xen: events: do not unmask event channels on resume xen: correct size of level2_kernel_pgt 13 November 2010, 00:01:55 UTC
b5c5510 Merge branch 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: MAINTAINERS: Mark XEN lists as moderated xen-pcifront: fix PCI reference leak xen-pcifront: Remove duplicate inclusion of headers. xen: fix memory leak in Xen PCI MSI/MSI-X allocator. MAINTAINERS: Update mailing list name for Xen pieces. 12 November 2010, 23:54:39 UTC
f254379 drivers/ata/pata_octeon_cf.c: delete double assignment Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 November 2010, 22:10:55 UTC
f60215a pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of CONFIG_PATA_WINBOND_VLB_MODULE. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 November 2010, 22:10:53 UTC
2a5f07b libata: fix NULL sdev dereference race in atapi_qc_complete() SCSI commands may be issued between __scsi_add_device() and dev->sdev assignment, so it's unsafe for ata_qc_complete() to dereference dev->sdev->locked without checking whether it's NULL or not. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 12 November 2010, 22:10:51 UTC
0597d1b can-bcm: fix minor heap overflow On 64-bit platforms the ASCII representation of a pointer may be up to 17 bytes long. This patch increases the length of the buffer accordingly. http://marc.info/?l=linux-netdev&m=128872251418192&w=2 Reported-by: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2010, 22:07:14 UTC
6c4f199 gianfar: Do not call device_set_wakeup_enable() under a spinlock The gianfar driver calls device_set_wakeup_enable() under a spinlock, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spinlock-protected area. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2010, 22:05:43 UTC
4038565 ipv6: Warn users if maximum number of routes is reached. This gives users at least some clue as to what the problem might be and how to go about fixing it. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2010, 22:03:24 UTC
back to top