Revision fc76be434d90bcd57a0ea6b93a2e66a3fec4b664 authored by Linus Torvalds on 05 February 2010, 00:09:01 UTC, committed by Linus Torvalds on 05 February 2010, 00:09:01 UTC
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
bt8xxgpio.txt
===============================================================
== BT8XXGPIO driver ==
== ==
== A driver for a selfmade cheap BT8xx based PCI GPIO-card ==
== ==
== For advanced documentation, see ==
== http://www.bu3sch.de/btgpio.php ==
===============================================================
A generic digital 24-port PCI GPIO card can be built out of an ordinary
Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
find them used for low prices on the net.
The bt8xx chip does have 24 digital GPIO ports.
These ports are accessible via 24 pins on the SMD chip package.
==============================================
== How to physically access the GPIO pins ==
==============================================
The are several ways to access these pins. One might unsolder the whole chip
and put it on a custom PCI board, or one might only unsolder each individual
GPIO pin and solder that to some tiny wire. As the chip package really is tiny
there are some advanced soldering skills needed in any case.
The physical pinouts are drawn in the following ASCII art.
The GPIO pins are marked with G00-G23
G G G G G G G G G G G G G G G G G G
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
---------------------------------------------------------------------------
--| ^ ^ |--
--| pin 86 pin 67 |--
--| |--
--| pin 61 > |-- G18
--| |-- G19
--| |-- G20
--| |-- G21
--| |-- G22
--| pin 56 > |-- G23
--| |--
--| Brooktree 878/879 |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| O |--
--| |--
---------------------------------------------------------------------------
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
^
This is pin 1
Computing file changes ...
