Revision fc9bbca8f650e5f738af8806317c0a041a48ae4a authored by Linus Torvalds on 19 April 2013, 16:57:35 UTC, committed by Linus Torvalds on 19 April 2013, 16:57:35 UTC
This is my example conversion of a few existing mmap users.  The
fb_mmap() case is a good example because it is a bit more complicated
than some: fb_mmap() mmaps one of two different memory areas depending
on the page offset of the mmap (but happily there is never any mixing of
the two, so the helper function still works).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 8558e4a
Raw File
attr.c
/*
 *  linux/fs/attr.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *  changes by Thomas Schoebel-Theuer
 */

#include <linux/export.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/capability.h>
#include <linux/fsnotify.h>
#include <linux/fcntl.h>
#include <linux/security.h>
#include <linux/evm.h>
#include <linux/ima.h>

/**
 * inode_change_ok - check if attribute changes to an inode are allowed
 * @inode:	inode to check
 * @attr:	attributes to change
 *
 * Check if we are allowed to change the attributes contained in @attr
 * in the given inode.  This includes the normal unix access permission
 * checks, as well as checks for rlimits and others.
 *
 * Should be called as the first thing in ->setattr implementations,
 * possibly after taking additional locks.
 */
int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
	unsigned int ia_valid = attr->ia_valid;

	/*
	 * First check size constraints.  These can't be overriden using
	 * ATTR_FORCE.
	 */
	if (ia_valid & ATTR_SIZE) {
		int error = inode_newsize_ok(inode, attr->ia_size);
		if (error)
			return error;
	}

	/* If force is set do it anyway. */
	if (ia_valid & ATTR_FORCE)
		return 0;

	/* Make sure a caller can chown. */
	if ((ia_valid & ATTR_UID) &&
	    (!uid_eq(current_fsuid(), inode->i_uid) ||
	     !uid_eq(attr->ia_uid, inode->i_uid)) &&
	    !inode_capable(inode, CAP_CHOWN))
		return -EPERM;

	/* Make sure caller can chgrp. */
	if ((ia_valid & ATTR_GID) &&
	    (!uid_eq(current_fsuid(), inode->i_uid) ||
	    (!in_group_p(attr->ia_gid) && !gid_eq(attr->ia_gid, inode->i_gid))) &&
	    !inode_capable(inode, CAP_CHOWN))
		return -EPERM;

	/* Make sure a caller can chmod. */
	if (ia_valid & ATTR_MODE) {
		if (!inode_owner_or_capable(inode))
			return -EPERM;
		/* Also check the setgid bit! */
		if (!in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid :
				inode->i_gid) &&
		    !inode_capable(inode, CAP_FSETID))
			attr->ia_mode &= ~S_ISGID;
	}

	/* Check for setting the inode time. */
	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
		if (!inode_owner_or_capable(inode))
			return -EPERM;
	}

	return 0;
}
EXPORT_SYMBOL(inode_change_ok);

/**
 * inode_newsize_ok - may this inode be truncated to a given size
 * @inode:	the inode to be truncated
 * @offset:	the new size to assign to the inode
 * @Returns:	0 on success, -ve errno on failure
 *
 * inode_newsize_ok must be called with i_mutex held.
 *
 * inode_newsize_ok will check filesystem limits and ulimits to check that the
 * new inode size is within limits. inode_newsize_ok will also send SIGXFSZ
 * when necessary. Caller must not proceed with inode size change if failure is
 * returned. @inode must be a file (not directory), with appropriate
 * permissions to allow truncate (inode_newsize_ok does NOT check these
 * conditions).
 */
int inode_newsize_ok(const struct inode *inode, loff_t offset)
{
	if (inode->i_size < offset) {
		unsigned long limit;

		limit = rlimit(RLIMIT_FSIZE);
		if (limit != RLIM_INFINITY && offset > limit)
			goto out_sig;
		if (offset > inode->i_sb->s_maxbytes)
			goto out_big;
	} else {
		/*
		 * truncation of in-use swapfiles is disallowed - it would
		 * cause subsequent swapout to scribble on the now-freed
		 * blocks.
		 */
		if (IS_SWAPFILE(inode))
			return -ETXTBSY;
	}

	return 0;
out_sig:
	send_sig(SIGXFSZ, current, 0);
out_big:
	return -EFBIG;
}
EXPORT_SYMBOL(inode_newsize_ok);

/**
 * setattr_copy - copy simple metadata updates into the generic inode
 * @inode:	the inode to be updated
 * @attr:	the new attributes
 *
 * setattr_copy must be called with i_mutex held.
 *
 * setattr_copy updates the inode's metadata with that specified
 * in attr. Noticeably missing is inode size update, which is more complex
 * as it requires pagecache updates.
 *
 * The inode is not marked as dirty after this operation. The rationale is
 * that for "simple" filesystems, the struct inode is the inode storage.
 * The caller is free to mark the inode dirty afterwards if needed.
 */
void setattr_copy(struct inode *inode, const struct iattr *attr)
{
	unsigned int ia_valid = attr->ia_valid;

	if (ia_valid & ATTR_UID)
		inode->i_uid = attr->ia_uid;
	if (ia_valid & ATTR_GID)
		inode->i_gid = attr->ia_gid;
	if (ia_valid & ATTR_ATIME)
		inode->i_atime = timespec_trunc(attr->ia_atime,
						inode->i_sb->s_time_gran);
	if (ia_valid & ATTR_MTIME)
		inode->i_mtime = timespec_trunc(attr->ia_mtime,
						inode->i_sb->s_time_gran);
	if (ia_valid & ATTR_CTIME)
		inode->i_ctime = timespec_trunc(attr->ia_ctime,
						inode->i_sb->s_time_gran);
	if (ia_valid & ATTR_MODE) {
		umode_t mode = attr->ia_mode;

		if (!in_group_p(inode->i_gid) &&
		    !inode_capable(inode, CAP_FSETID))
			mode &= ~S_ISGID;
		inode->i_mode = mode;
	}
}
EXPORT_SYMBOL(setattr_copy);

int notify_change(struct dentry * dentry, struct iattr * attr)
{
	struct inode *inode = dentry->d_inode;
	umode_t mode = inode->i_mode;
	int error;
	struct timespec now;
	unsigned int ia_valid = attr->ia_valid;

	WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));

	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
			return -EPERM;
	}

	if ((ia_valid & ATTR_SIZE) && IS_I_VERSION(inode)) {
		if (attr->ia_size != inode->i_size)
			inode_inc_iversion(inode);
	}

	if ((ia_valid & ATTR_MODE)) {
		umode_t amode = attr->ia_mode;
		/* Flag setting protected by i_mutex */
		if (is_sxid(amode))
			inode->i_flags &= ~S_NOSEC;
	}

	now = current_fs_time(inode->i_sb);

	attr->ia_ctime = now;
	if (!(ia_valid & ATTR_ATIME_SET))
		attr->ia_atime = now;
	if (!(ia_valid & ATTR_MTIME_SET))
		attr->ia_mtime = now;
	if (ia_valid & ATTR_KILL_PRIV) {
		attr->ia_valid &= ~ATTR_KILL_PRIV;
		ia_valid &= ~ATTR_KILL_PRIV;
		error = security_inode_need_killpriv(dentry);
		if (error > 0)
			error = security_inode_killpriv(dentry);
		if (error)
			return error;
	}

	/*
	 * We now pass ATTR_KILL_S*ID to the lower level setattr function so
	 * that the function has the ability to reinterpret a mode change
	 * that's due to these bits. This adds an implicit restriction that
	 * no function will ever call notify_change with both ATTR_MODE and
	 * ATTR_KILL_S*ID set.
	 */
	if ((ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) &&
	    (ia_valid & ATTR_MODE))
		BUG();

	if (ia_valid & ATTR_KILL_SUID) {
		if (mode & S_ISUID) {
			ia_valid = attr->ia_valid |= ATTR_MODE;
			attr->ia_mode = (inode->i_mode & ~S_ISUID);
		}
	}
	if (ia_valid & ATTR_KILL_SGID) {
		if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
			if (!(ia_valid & ATTR_MODE)) {
				ia_valid = attr->ia_valid |= ATTR_MODE;
				attr->ia_mode = inode->i_mode;
			}
			attr->ia_mode &= ~S_ISGID;
		}
	}
	if (!(attr->ia_valid & ~(ATTR_KILL_SUID | ATTR_KILL_SGID)))
		return 0;

	error = security_inode_setattr(dentry, attr);
	if (error)
		return error;

	if (inode->i_op->setattr)
		error = inode->i_op->setattr(dentry, attr);
	else
		error = simple_setattr(dentry, attr);

	if (!error) {
		fsnotify_change(dentry, ia_valid);
		ima_inode_post_setattr(dentry);
		evm_inode_post_setattr(dentry, ia_valid);
	}

	return error;
}
EXPORT_SYMBOL(notify_change);
back to top