Revision fe53297356da5f02478fe9cafab5d9914a36d2be authored by Thorsten Becker on 14 August 2007, 03:33:21 UTC, committed by Thorsten Becker on 14 August 2007, 03:33:21 UTC
spacing to top and lower layers of shell. The coor_refine=0.1,0.15,0.1,0.2 parameters specify the radius fraction of the bottom layer [0], the fraction of the nodes in this layer [1], the top layer fraction [2], and the top layer node fraction [3]. I.e. the defaults will put 15% of all nz nodes into the 10% lower layer, 20% in the top 10% upper layer, and the rest in between. - renamed gzipped output version with sub-directory storage ascii-gz - built in restart facilities for temperature and tracers when using ascii-gz I/O with vtkio != 2 - added a composition viscosity function, CDEPV, based on two tracer flavors - for this to work, I had to move viscosity_input() *behind* tic_input() and tracer_input() in instructions - added tracer_enriched option for internal heating. If tracer = on and tracer_enriched = on, will reader Q0_enriched and vary the element heat production between Q0 for C = 0 and Q0_enriched for C = 1. I.e. this only works if C varies between 0 and 1. - added an option to write from all processros to a single VTK file, if ascii-gz is activated, and vtkio = 2. The VTK output is of the "legacy", serial, single-file type, and requires that all processors see the same filesystem. This will lead to a bottleneck for large # of CPU computations as each processor has to wait til the previous is done. More efficient I/O should be possible by using the distributed storage version of VTK, but I have no clue how this works. Anyone?
1 parent d6e512c
Regional_geometry_cartesian.c
/*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*<LicenseText>
*
* CitcomS by Louis Moresi, Shijie Zhong, Lijie Han, Eh Tan,
* Clint Conrad, Michael Gurnis, and Eun-seo Choi.
* Copyright (C) 1994-2005, California Institute of Technology.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*</LicenseText>
*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include "global_defs.h"
#include "parsing.h"
void regional_set_2dc_defaults(E)
struct All_variables *E;
{
E->mesh.nsd = 2;
E->mesh.dof = 2;
}
void regional_set_2pt5dc_defaults(E)
struct All_variables *E;
{
E->mesh.nsd = 2;
E->mesh.dof = 3;
}
void regional_set_3dc_defaults(E)
struct All_variables *E;
{
E->mesh.nsd = 3;
E->mesh.dof = 3;
}
void regional_set_3dsphere_defaults(E)
struct All_variables *E;
{
void regional_set_3dsphere_defaults2(struct All_variables *E);
int m = E->parallel.me;
input_double("radius_outer",&(E->sphere.ro),"1",m);
input_double("radius_inner",&(E->sphere.ri),"0.55",m);
input_double("theta_min",&(E->control.theta_min),"essential",m);
input_double("theta_max",&(E->control.theta_max),"essential",m);
input_double("fi_min",&(E->control.fi_min),"essential",m);
input_double("fi_max",&(E->control.fi_max),"essential",m);
regional_set_3dsphere_defaults2(E);
return;
}
void regional_set_3dsphere_defaults2(struct All_variables *E)
{
E->mesh.nsd = 3;
E->mesh.dof = 3;
E->sphere.caps = 1;
E->sphere.max_connections = 6;
E->sphere.cap[1].theta[1] = E->control.theta_min;
E->sphere.cap[1].theta[2] = E->control.theta_max;
E->sphere.cap[1].theta[3] = E->control.theta_max;
E->sphere.cap[1].theta[4] = E->control.theta_min;
E->sphere.cap[1].fi[1] = E->control.fi_min;
E->sphere.cap[1].fi[2] = E->control.fi_min;
E->sphere.cap[1].fi[3] = E->control.fi_max;
E->sphere.cap[1].fi[4] = E->control.fi_max;
return;
}
Computing file changes ...