Revision fe53297356da5f02478fe9cafab5d9914a36d2be authored by Thorsten Becker on 14 August 2007, 03:33:21 UTC, committed by Thorsten Becker on 14 August 2007, 03:33:21 UTC
spacing to top and lower layers of shell. The coor_refine=0.1,0.15,0.1,0.2 parameters specify the radius fraction of the bottom layer [0], the fraction of the nodes in this layer [1], the top layer fraction [2], and the top layer node fraction [3]. I.e. the defaults will put 15% of all nz nodes into the 10% lower layer, 20% in the top 10% upper layer, and the rest in between. - renamed gzipped output version with sub-directory storage ascii-gz - built in restart facilities for temperature and tracers when using ascii-gz I/O with vtkio != 2 - added a composition viscosity function, CDEPV, based on two tracer flavors - for this to work, I had to move viscosity_input() *behind* tic_input() and tracer_input() in instructions - added tracer_enriched option for internal heating. If tracer = on and tracer_enriched = on, will reader Q0_enriched and vary the element heat production between Q0 for C = 0 and Q0_enriched for C = 1. I.e. this only works if C varies between 0 and 1. - added an option to write from all processros to a single VTK file, if ascii-gz is activated, and vtkio = 2. The VTK output is of the "legacy", serial, single-file type, and requires that all processors see the same filesystem. This will lead to a bottleneck for large # of CPU computations as each processor has to wait til the previous is done. More efficient I/O should be possible by using the distributed storage version of VTK, but I have no clue how this works. Anyone?
1 parent d6e512c
File | Mode | Size |
---|---|---|
Exchanger | ||
CitcomSmodule.c | -rw-r--r-- | 1.9 KB |
CitcomSmodule.h | -rw-r--r-- | 1.3 KB |
Makefile.am | -rw-r--r-- | 2.1 KB |
advdiffu.c | -rw-r--r-- | 3.5 KB |
advdiffu.h | -rw-r--r-- | 1.8 KB |
bindings.c | -rw-r--r-- | 9.5 KB |
bindings.h | -rw-r--r-- | 1.2 KB |
exceptions.c | -rw-r--r-- | 1.1 KB |
exceptions.h | -rw-r--r-- | 1.2 KB |
getProperty.h | -rw-r--r-- | 2.9 KB |
initial_conditions.c | -rw-r--r-- | 3.9 KB |
initial_conditions.h | -rw-r--r-- | 2.0 KB |
mesher.c | -rw-r--r-- | 2.2 KB |
mesher.h | -rw-r--r-- | 1.5 KB |
misc.c | -rw-r--r-- | 10.0 KB |
misc.h | -rw-r--r-- | 3.9 KB |
outputs.c | -rw-r--r-- | 2.5 KB |
outputs.h | -rw-r--r-- | 1.6 KB |
setProperties.c | -rw-r--r-- | 28.2 KB |
setProperties.h | -rw-r--r-- | 3.3 KB |
stokes_solver.c | -rw-r--r-- | 7.4 KB |
stokes_solver.h | -rw-r--r-- | 3.1 KB |
Computing file changes ...