Revision ff9cef026633798801780c43a88093a297f0ca32 authored by Kurt Roeckx on 02 January 2016, 19:42:27 UTC, committed by Kurt Roeckx on 10 January 2016, 12:14:52 UTC
Reviewed-by: Dr. Stephen Henson <steve@openssl.org> (cherry picked from commit 1918e01c9f915e2eba31a5e2f86f0a5daa4fafb6)
1 parent 737d57d
s3_pkt.c
/* ssl/s3_pkt.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include <stdio.h>
#include <limits.h>
#include <errno.h>
#define USE_SOCKETS
#include "ssl_locl.h"
#include <openssl/evp.h>
#include <openssl/buffer.h>
#include <openssl/rand.h>
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
unsigned int len, int create_empty_fragment);
static int ssl3_get_record(SSL *s);
int ssl3_read_n(SSL *s, int n, int max, int extend)
{
/*
* If extend == 0, obtain new n-byte packet; if extend == 1, increase
* packet by another n bytes. The packet will be in the sub-array of
* s->s3->rbuf.buf specified by s->packet and s->packet_length. (If
* s->read_ahead is set, 'max' bytes may be stored in rbuf [plus
* s->packet_length bytes if extend == 1].)
*/
int i, len, left;
long align = 0;
unsigned char *pkt;
SSL3_BUFFER *rb;
if (n <= 0)
return n;
rb = &(s->s3->rbuf);
if (rb->buf == NULL)
if (!ssl3_setup_read_buffer(s))
return -1;
left = rb->left;
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
align = (long)rb->buf + SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
if (!extend) {
/* start with empty packet ... */
if (left == 0)
rb->offset = align;
else if (align != 0 && left >= SSL3_RT_HEADER_LENGTH) {
/*
* check if next packet length is large enough to justify payload
* alignment...
*/
pkt = rb->buf + rb->offset;
if (pkt[0] == SSL3_RT_APPLICATION_DATA
&& (pkt[3] << 8 | pkt[4]) >= 128) {
/*
* Note that even if packet is corrupted and its length field
* is insane, we can only be led to wrong decision about
* whether memmove will occur or not. Header values has no
* effect on memmove arguments and therefore no buffer
* overrun can be triggered.
*/
memmove(rb->buf + align, pkt, left);
rb->offset = align;
}
}
s->packet = rb->buf + rb->offset;
s->packet_length = 0;
/* ... now we can act as if 'extend' was set */
}
/*
* For DTLS/UDP reads should not span multiple packets because the read
* operation returns the whole packet at once (as long as it fits into
* the buffer).
*/
if (SSL_version(s) == DTLS1_VERSION || SSL_version(s) == DTLS1_BAD_VER) {
if (left == 0 && extend)
return 0;
if (left > 0 && n > left)
n = left;
}
/* if there is enough in the buffer from a previous read, take some */
if (left >= n) {
s->packet_length += n;
rb->left = left - n;
rb->offset += n;
return (n);
}
/* else we need to read more data */
len = s->packet_length;
pkt = rb->buf + align;
/*
* Move any available bytes to front of buffer: 'len' bytes already
* pointed to by 'packet', 'left' extra ones at the end
*/
if (s->packet != pkt) { /* len > 0 */
memmove(pkt, s->packet, len + left);
s->packet = pkt;
rb->offset = len + align;
}
if (n > (int)(rb->len - rb->offset)) { /* does not happen */
SSLerr(SSL_F_SSL3_READ_N, ERR_R_INTERNAL_ERROR);
return -1;
}
/* We always act like read_ahead is set for DTLS */
if (!s->read_ahead && !SSL_IS_DTLS(s))
/* ignore max parameter */
max = n;
else {
if (max < n)
max = n;
if (max > (int)(rb->len - rb->offset))
max = rb->len - rb->offset;
}
while (left < n) {
/*
* Now we have len+left bytes at the front of s->s3->rbuf.buf and
* need to read in more until we have len+n (up to len+max if
* possible)
*/
clear_sys_error();
if (s->rbio != NULL) {
s->rwstate = SSL_READING;
i = BIO_read(s->rbio, pkt + len + left, max - left);
} else {
SSLerr(SSL_F_SSL3_READ_N, SSL_R_READ_BIO_NOT_SET);
i = -1;
}
if (i <= 0) {
rb->left = left;
if (s->mode & SSL_MODE_RELEASE_BUFFERS &&
SSL_version(s) != DTLS1_VERSION
&& SSL_version(s) != DTLS1_BAD_VER)
if (len + left == 0)
ssl3_release_read_buffer(s);
return (i);
}
left += i;
/*
* reads should *never* span multiple packets for DTLS because the
* underlying transport protocol is message oriented as opposed to
* byte oriented as in the TLS case.
*/
if (SSL_version(s) == DTLS1_VERSION
|| SSL_version(s) == DTLS1_BAD_VER) {
if (n > left)
n = left; /* makes the while condition false */
}
}
/* done reading, now the book-keeping */
rb->offset += n;
rb->left = left - n;
s->packet_length += n;
s->rwstate = SSL_NOTHING;
return (n);
}
/*
* MAX_EMPTY_RECORDS defines the number of consecutive, empty records that
* will be processed per call to ssl3_get_record. Without this limit an
* attacker could send empty records at a faster rate than we can process and
* cause ssl3_get_record to loop forever.
*/
#define MAX_EMPTY_RECORDS 32
/*-
* Call this to get a new input record.
* It will return <= 0 if more data is needed, normally due to an error
* or non-blocking IO.
* When it finishes, one packet has been decoded and can be found in
* ssl->s3->rrec.type - is the type of record
* ssl->s3->rrec.data, - data
* ssl->s3->rrec.length, - number of bytes
*/
/* used only by ssl3_read_bytes */
static int ssl3_get_record(SSL *s)
{
int ssl_major, ssl_minor, al;
int enc_err, n, i, ret = -1;
SSL3_RECORD *rr;
SSL_SESSION *sess;
unsigned char *p;
unsigned char md[EVP_MAX_MD_SIZE];
short version;
unsigned mac_size, orig_len;
size_t extra;
unsigned empty_record_count = 0;
rr = &(s->s3->rrec);
sess = s->session;
if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER)
extra = SSL3_RT_MAX_EXTRA;
else
extra = 0;
if (extra && !s->s3->init_extra) {
/*
* An application error: SLS_OP_MICROSOFT_BIG_SSLV3_BUFFER set after
* ssl3_setup_buffers() was done
*/
SSLerr(SSL_F_SSL3_GET_RECORD, ERR_R_INTERNAL_ERROR);
return -1;
}
again:
/* check if we have the header */
if ((s->rstate != SSL_ST_READ_BODY) ||
(s->packet_length < SSL3_RT_HEADER_LENGTH)) {
n = ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
if (n <= 0)
return (n); /* error or non-blocking */
s->rstate = SSL_ST_READ_BODY;
p = s->packet;
/* Pull apart the header into the SSL3_RECORD */
rr->type = *(p++);
ssl_major = *(p++);
ssl_minor = *(p++);
version = (ssl_major << 8) | ssl_minor;
n2s(p, rr->length);
#if 0
fprintf(stderr, "Record type=%d, Length=%d\n", rr->type, rr->length);
#endif
/* Lets check version */
if (!s->first_packet) {
if (version != s->version) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
if ((s->version & 0xFF00) == (version & 0xFF00)
&& !s->enc_write_ctx && !s->write_hash) {
if (rr->type == SSL3_RT_ALERT) {
/*
* The record is using an incorrect version number, but
* what we've got appears to be an alert. We haven't
* read the body yet to check whether its a fatal or
* not - but chances are it is. We probably shouldn't
* send a fatal alert back. We'll just end.
*/
goto err;
}
/*
* Send back error using their minor version number :-)
*/
s->version = (unsigned short)version;
}
al = SSL_AD_PROTOCOL_VERSION;
goto f_err;
}
}
if ((version >> 8) != SSL3_VERSION_MAJOR) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
goto err;
}
if (rr->length > s->s3->rbuf.len - SSL3_RT_HEADER_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_PACKET_LENGTH_TOO_LONG);
goto f_err;
}
/* now s->rstate == SSL_ST_READ_BODY */
}
/* s->rstate == SSL_ST_READ_BODY, get and decode the data */
if (rr->length > s->packet_length - SSL3_RT_HEADER_LENGTH) {
/* now s->packet_length == SSL3_RT_HEADER_LENGTH */
i = rr->length;
n = ssl3_read_n(s, i, i, 1);
if (n <= 0)
return (n); /* error or non-blocking io */
/*
* now n == rr->length, and s->packet_length == SSL3_RT_HEADER_LENGTH
* + rr->length
*/
}
s->rstate = SSL_ST_READ_HEADER; /* set state for later operations */
/*
* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
* and we have that many bytes in s->packet
*/
rr->input = &(s->packet[SSL3_RT_HEADER_LENGTH]);
/*
* ok, we can now read from 's->packet' data into 'rr' rr->input points
* at rr->length bytes, which need to be copied into rr->data by either
* the decryption or by the decompression When the data is 'copied' into
* the rr->data buffer, rr->input will be pointed at the new buffer
*/
/*
* We now have - encrypted [ MAC [ compressed [ plain ] ] ] rr->length
* bytes of encrypted compressed stuff.
*/
/* check is not needed I believe */
if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
goto f_err;
}
/* decrypt in place in 'rr->input' */
rr->data = rr->input;
enc_err = s->method->ssl3_enc->enc(s, 0);
/*-
* enc_err is:
* 0: (in non-constant time) if the record is publically invalid.
* 1: if the padding is valid
* -1: if the padding is invalid
*/
if (enc_err == 0) {
al = SSL_AD_DECRYPTION_FAILED;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
goto f_err;
}
#ifdef TLS_DEBUG
printf("dec %d\n", rr->length);
{
unsigned int z;
for (z = 0; z < rr->length; z++)
printf("%02X%c", rr->data[z], ((z + 1) % 16) ? ' ' : '\n');
}
printf("\n");
#endif
/* r->length is now the compressed data plus mac */
if ((sess != NULL) &&
(s->enc_read_ctx != NULL) && (EVP_MD_CTX_md(s->read_hash) != NULL)) {
/* s->read_hash != NULL => mac_size != -1 */
unsigned char *mac = NULL;
unsigned char mac_tmp[EVP_MAX_MD_SIZE];
mac_size = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
/*
* kludge: *_cbc_remove_padding passes padding length in rr->type
*/
orig_len = rr->length + ((unsigned int)rr->type >> 8);
/*
* orig_len is the length of the record before any padding was
* removed. This is public information, as is the MAC in use,
* therefore we can safely process the record in a different amount
* of time if it's too short to possibly contain a MAC.
*/
if (orig_len < mac_size ||
/* CBC records must have a padding length byte too. */
(EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
orig_len < mac_size + 1)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE) {
/*
* We update the length so that the TLS header bytes can be
* constructed correctly but we need to extract the MAC in
* constant time from within the record, without leaking the
* contents of the padding bytes.
*/
mac = mac_tmp;
ssl3_cbc_copy_mac(mac_tmp, rr, mac_size, orig_len);
rr->length -= mac_size;
} else {
/*
* In this case there's no padding, so |orig_len| equals
* |rec->length| and we checked that there's enough bytes for
* |mac_size| above.
*/
rr->length -= mac_size;
mac = &rr->data[rr->length];
}
i = s->method->ssl3_enc->mac(s, md, 0 /* not send */ );
if (i < 0 || mac == NULL
|| CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
enc_err = -1;
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + extra + mac_size)
enc_err = -1;
}
if (enc_err < 0) {
/*
* A separate 'decryption_failed' alert was introduced with TLS 1.0,
* SSL 3.0 only has 'bad_record_mac'. But unless a decryption
* failure is directly visible from the ciphertext anyway, we should
* not reveal which kind of error occured -- this might become
* visible to an attacker (e.g. via a logfile)
*/
al = SSL_AD_BAD_RECORD_MAC;
SSLerr(SSL_F_SSL3_GET_RECORD,
SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
goto f_err;
}
/* r->length is now just compressed */
if (s->expand != NULL) {
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_COMPRESSED_LENGTH_TOO_LONG);
goto f_err;
}
if (!ssl3_do_uncompress(s)) {
al = SSL_AD_DECOMPRESSION_FAILURE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BAD_DECOMPRESSION);
goto f_err;
}
}
if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH + extra) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_DATA_LENGTH_TOO_LONG);
goto f_err;
}
rr->off = 0;
/*-
* So at this point the following is true
* ssl->s3->rrec.type is the type of record
* ssl->s3->rrec.length == number of bytes in record
* ssl->s3->rrec.off == offset to first valid byte
* ssl->s3->rrec.data == where to take bytes from, increment
* after use :-).
*/
/* we have pulled in a full packet so zero things */
s->packet_length = 0;
/* just read a 0 length packet */
if (rr->length == 0) {
empty_record_count++;
if (empty_record_count > MAX_EMPTY_RECORDS) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_RECORD_TOO_SMALL);
goto f_err;
}
goto again;
}
#if 0
fprintf(stderr, "Ultimate Record type=%d, Length=%d\n", rr->type,
rr->length);
#endif
return (1);
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return (ret);
}
int ssl3_do_uncompress(SSL *ssl)
{
#ifndef OPENSSL_NO_COMP
int i;
SSL3_RECORD *rr;
rr = &(ssl->s3->rrec);
i = COMP_expand_block(ssl->expand, rr->comp,
SSL3_RT_MAX_PLAIN_LENGTH, rr->data,
(int)rr->length);
if (i < 0)
return (0);
else
rr->length = i;
rr->data = rr->comp;
#endif
return (1);
}
int ssl3_do_compress(SSL *ssl)
{
#ifndef OPENSSL_NO_COMP
int i;
SSL3_RECORD *wr;
wr = &(ssl->s3->wrec);
i = COMP_compress_block(ssl->compress, wr->data,
SSL3_RT_MAX_COMPRESSED_LENGTH,
wr->input, (int)wr->length);
if (i < 0)
return (0);
else
wr->length = i;
wr->input = wr->data;
#endif
return (1);
}
/*
* Call this to write data in records of type 'type' It will return <= 0 if
* not all data has been sent or non-blocking IO.
*/
int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len)
{
const unsigned char *buf = buf_;
unsigned int n, nw;
int i, tot;
s->rwstate = SSL_NOTHING;
OPENSSL_assert(s->s3->wnum <= INT_MAX);
tot = s->s3->wnum;
s->s3->wnum = 0;
if (SSL_in_init(s) && !s->in_handshake) {
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_WRITE_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return -1;
}
}
/*
* ensure that if we end up with a smaller value of data to write out
* than the the original len from a write which didn't complete for
* non-blocking I/O and also somehow ended up avoiding the check for
* this in ssl3_write_pending/SSL_R_BAD_WRITE_RETRY as it must never be
* possible to end up with (len-tot) as a large number that will then
* promptly send beyond the end of the users buffer ... so we trap and
* report the error in a way the user will notice
*/
if (len < tot) {
SSLerr(SSL_F_SSL3_WRITE_BYTES, SSL_R_BAD_LENGTH);
return (-1);
}
n = (len - tot);
for (;;) {
if (n > s->max_send_fragment)
nw = s->max_send_fragment;
else
nw = n;
i = do_ssl3_write(s, type, &(buf[tot]), nw, 0);
if (i <= 0) {
s->s3->wnum = tot;
return i;
}
if ((i == (int)n) ||
(type == SSL3_RT_APPLICATION_DATA &&
(s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))) {
/*
* next chunk of data should get another prepended empty fragment
* in ciphersuites with known-IV weakness:
*/
s->s3->empty_fragment_done = 0;
return tot + i;
}
n -= i;
tot += i;
}
}
static int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
unsigned int len, int create_empty_fragment)
{
unsigned char *p, *plen;
int i, mac_size, clear = 0;
int prefix_len = 0;
int eivlen;
long align = 0;
SSL3_RECORD *wr;
SSL3_BUFFER *wb = &(s->s3->wbuf);
SSL_SESSION *sess;
/*
* first check if there is a SSL3_BUFFER still being written out. This
* will happen with non blocking IO
*/
if (wb->left != 0)
return (ssl3_write_pending(s, type, buf, len));
/* If we have an alert to send, lets send it */
if (s->s3->alert_dispatch) {
i = s->method->ssl_dispatch_alert(s);
if (i <= 0)
return (i);
/* if it went, fall through and send more stuff */
}
if (wb->buf == NULL)
if (!ssl3_setup_write_buffer(s))
return -1;
if (len == 0 && !create_empty_fragment)
return 0;
wr = &(s->s3->wrec);
sess = s->session;
if ((sess == NULL) ||
(s->enc_write_ctx == NULL) ||
(EVP_MD_CTX_md(s->write_hash) == NULL)) {
#if 1
clear = s->enc_write_ctx ? 0 : 1; /* must be AEAD cipher */
#else
clear = 1;
#endif
mac_size = 0;
} else {
mac_size = EVP_MD_CTX_size(s->write_hash);
if (mac_size < 0)
goto err;
}
/*
* 'create_empty_fragment' is true only when this function calls itself
*/
if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done) {
/*
* countermeasure against known-IV weakness in CBC ciphersuites (see
* http://www.openssl.org/~bodo/tls-cbc.txt)
*/
if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA) {
/*
* recursive function call with 'create_empty_fragment' set; this
* prepares and buffers the data for an empty fragment (these
* 'prefix_len' bytes are sent out later together with the actual
* payload)
*/
prefix_len = do_ssl3_write(s, type, buf, 0, 1);
if (prefix_len <= 0)
goto err;
if (prefix_len >
(SSL3_RT_HEADER_LENGTH + SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD))
{
/* insufficient space */
SSLerr(SSL_F_DO_SSL3_WRITE, ERR_R_INTERNAL_ERROR);
goto err;
}
}
s->s3->empty_fragment_done = 1;
}
if (create_empty_fragment) {
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
/*
* extra fragment would be couple of cipher blocks, which would be
* multiple of SSL3_ALIGN_PAYLOAD, so if we want to align the real
* payload, then we can just pretent we simply have two headers.
*/
align = (long)wb->buf + 2 * SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
p = wb->buf + align;
wb->offset = align;
} else if (prefix_len) {
p = wb->buf + wb->offset + prefix_len;
} else {
#if defined(SSL3_ALIGN_PAYLOAD) && SSL3_ALIGN_PAYLOAD!=0
align = (long)wb->buf + SSL3_RT_HEADER_LENGTH;
align = (-align) & (SSL3_ALIGN_PAYLOAD - 1);
#endif
p = wb->buf + align;
wb->offset = align;
}
/* write the header */
*(p++) = type & 0xff;
wr->type = type;
*(p++) = (s->version >> 8);
/*
* Some servers hang if iniatial client hello is larger than 256 bytes
* and record version number > TLS 1.0
*/
if (s->state == SSL3_ST_CW_CLNT_HELLO_B
&& !s->renegotiate && TLS1_get_version(s) > TLS1_VERSION)
*(p++) = 0x1;
else
*(p++) = s->version & 0xff;
/* field where we are to write out packet length */
plen = p;
p += 2;
/* Explicit IV length, block ciphers and TLS version 1.1 or later */
if (s->enc_write_ctx && s->version >= TLS1_1_VERSION) {
int mode = EVP_CIPHER_CTX_mode(s->enc_write_ctx);
if (mode == EVP_CIPH_CBC_MODE) {
eivlen = EVP_CIPHER_CTX_iv_length(s->enc_write_ctx);
if (eivlen <= 1)
eivlen = 0;
}
/* Need explicit part of IV for GCM mode */
else if (mode == EVP_CIPH_GCM_MODE)
eivlen = EVP_GCM_TLS_EXPLICIT_IV_LEN;
else
eivlen = 0;
} else
eivlen = 0;
/* lets setup the record stuff. */
wr->data = p + eivlen;
wr->length = (int)len;
wr->input = (unsigned char *)buf;
/*
* we now 'read' from wr->input, wr->length bytes into wr->data
*/
/* first we compress */
if (s->compress != NULL) {
if (!ssl3_do_compress(s)) {
SSLerr(SSL_F_DO_SSL3_WRITE, SSL_R_COMPRESSION_FAILURE);
goto err;
}
} else {
memcpy(wr->data, wr->input, wr->length);
wr->input = wr->data;
}
/*
* we should still have the output to wr->data and the input from
* wr->input. Length should be wr->length. wr->data still points in the
* wb->buf
*/
if (mac_size != 0) {
if (s->method->ssl3_enc->mac(s, &(p[wr->length + eivlen]), 1) < 0)
goto err;
wr->length += mac_size;
}
wr->input = p;
wr->data = p;
if (eivlen) {
/*
* if (RAND_pseudo_bytes(p, eivlen) <= 0) goto err;
*/
wr->length += eivlen;
}
if (s->method->ssl3_enc->enc(s, 1) < 1)
goto err;
/* record length after mac and block padding */
s2n(wr->length, plen);
/*
* we should now have wr->data pointing to the encrypted data, which is
* wr->length long
*/
wr->type = type; /* not needed but helps for debugging */
wr->length += SSL3_RT_HEADER_LENGTH;
if (create_empty_fragment) {
/*
* we are in a recursive call; just return the length, don't write
* out anything here
*/
return wr->length;
}
/* now let's set up wb */
wb->left = prefix_len + wr->length;
/*
* memorize arguments so that ssl3_write_pending can detect bad write
* retries later
*/
s->s3->wpend_tot = len;
s->s3->wpend_buf = buf;
s->s3->wpend_type = type;
s->s3->wpend_ret = len;
/* we now just need to write the buffer */
return ssl3_write_pending(s, type, buf, len);
err:
return -1;
}
/* if s->s3->wbuf.left != 0, we need to call this */
int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
unsigned int len)
{
int i;
SSL3_BUFFER *wb = &(s->s3->wbuf);
/* XXXX */
if ((s->s3->wpend_tot > (int)len)
|| ((s->s3->wpend_buf != buf) &&
!(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER))
|| (s->s3->wpend_type != type)) {
SSLerr(SSL_F_SSL3_WRITE_PENDING, SSL_R_BAD_WRITE_RETRY);
return (-1);
}
for (;;) {
clear_sys_error();
if (s->wbio != NULL) {
s->rwstate = SSL_WRITING;
i = BIO_write(s->wbio,
(char *)&(wb->buf[wb->offset]),
(unsigned int)wb->left);
} else {
SSLerr(SSL_F_SSL3_WRITE_PENDING, SSL_R_BIO_NOT_SET);
i = -1;
}
if (i == wb->left) {
wb->left = 0;
wb->offset += i;
if (s->mode & SSL_MODE_RELEASE_BUFFERS &&
SSL_version(s) != DTLS1_VERSION
&& SSL_version(s) != DTLS1_BAD_VER)
ssl3_release_write_buffer(s);
s->rwstate = SSL_NOTHING;
return (s->s3->wpend_ret);
} else if (i <= 0) {
if (s->version == DTLS1_VERSION || s->version == DTLS1_BAD_VER) {
/*
* For DTLS, just drop it. That's kind of the whole point in
* using a datagram service
*/
wb->left = 0;
}
return (i);
}
wb->offset += i;
wb->left -= i;
}
}
/*-
* Return up to 'len' payload bytes received in 'type' records.
* 'type' is one of the following:
*
* - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
* - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
* - 0 (during a shutdown, no data has to be returned)
*
* If we don't have stored data to work from, read a SSL/TLS record first
* (possibly multiple records if we still don't have anything to return).
*
* This function must handle any surprises the peer may have for us, such as
* Alert records (e.g. close_notify), ChangeCipherSpec records (not really
* a surprise, but handled as if it were), or renegotiation requests.
* Also if record payloads contain fragments too small to process, we store
* them until there is enough for the respective protocol (the record protocol
* may use arbitrary fragmentation and even interleaving):
* Change cipher spec protocol
* just 1 byte needed, no need for keeping anything stored
* Alert protocol
* 2 bytes needed (AlertLevel, AlertDescription)
* Handshake protocol
* 4 bytes needed (HandshakeType, uint24 length) -- we just have
* to detect unexpected Client Hello and Hello Request messages
* here, anything else is handled by higher layers
* Application data protocol
* none of our business
*/
int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
{
int al, i, j, ret;
unsigned int n;
SSL3_RECORD *rr;
void (*cb) (const SSL *ssl, int type2, int val) = NULL;
if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
if (!ssl3_setup_read_buffer(s))
return (-1);
if ((type && (type != SSL3_RT_APPLICATION_DATA)
&& (type != SSL3_RT_HANDSHAKE)) || (peek
&& (type !=
SSL3_RT_APPLICATION_DATA))) {
SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
return -1;
}
if ((type == SSL3_RT_HANDSHAKE) && (s->s3->handshake_fragment_len > 0))
/* (partially) satisfy request from storage */
{
unsigned char *src = s->s3->handshake_fragment;
unsigned char *dst = buf;
unsigned int k;
/* peek == 0 */
n = 0;
while ((len > 0) && (s->s3->handshake_fragment_len > 0)) {
*dst++ = *src++;
len--;
s->s3->handshake_fragment_len--;
n++;
}
/* move any remaining fragment bytes: */
for (k = 0; k < s->s3->handshake_fragment_len; k++)
s->s3->handshake_fragment[k] = *src++;
return n;
}
/*
* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE.
*/
if (!s->in_handshake && SSL_in_init(s)) {
/* type == SSL3_RT_APPLICATION_DATA */
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
}
start:
s->rwstate = SSL_NOTHING;
/*-
* s->s3->rrec.type - is the type of record
* s->s3->rrec.data, - data
* s->s3->rrec.off, - offset into 'data' for next read
* s->s3->rrec.length, - number of bytes.
*/
rr = &(s->s3->rrec);
/* get new packet if necessary */
if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY)) {
ret = ssl3_get_record(s);
if (ret <= 0)
return (ret);
}
/* we now have a packet which can be read and processed */
if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
* reset by ssl3_get_finished */
&& (rr->type != SSL3_RT_HANDSHAKE)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_DATA_BETWEEN_CCS_AND_FINISHED);
goto f_err;
}
/*
* If the other end has shut down, throw anything we read away (even in
* 'peek' mode)
*/
if (s->shutdown & SSL_RECEIVED_SHUTDOWN) {
rr->length = 0;
s->rwstate = SSL_NOTHING;
return (0);
}
if (type == rr->type) { /* SSL3_RT_APPLICATION_DATA or
* SSL3_RT_HANDSHAKE */
/*
* make sure that we are not getting application data when we are
* doing a handshake for the first time
*/
if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
(s->enc_read_ctx == NULL)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_APP_DATA_IN_HANDSHAKE);
goto f_err;
}
if (len <= 0)
return (len);
if ((unsigned int)len > rr->length)
n = rr->length;
else
n = (unsigned int)len;
memcpy(buf, &(rr->data[rr->off]), n);
if (!peek) {
rr->length -= n;
rr->off += n;
if (rr->length == 0) {
s->rstate = SSL_ST_READ_HEADER;
rr->off = 0;
if (s->mode & SSL_MODE_RELEASE_BUFFERS
&& s->s3->rbuf.left == 0)
ssl3_release_read_buffer(s);
}
}
return (n);
}
/*
* If we get here, then type != rr->type; if we have a handshake message,
* then it was unexpected (Hello Request or Client Hello).
*/
/*
* In case of record types for which we have 'fragment' storage, fill
* that so that we can process the data at a fixed place.
*/
{
unsigned int dest_maxlen = 0;
unsigned char *dest = NULL;
unsigned int *dest_len = NULL;
if (rr->type == SSL3_RT_HANDSHAKE) {
dest_maxlen = sizeof s->s3->handshake_fragment;
dest = s->s3->handshake_fragment;
dest_len = &s->s3->handshake_fragment_len;
} else if (rr->type == SSL3_RT_ALERT) {
dest_maxlen = sizeof s->s3->alert_fragment;
dest = s->s3->alert_fragment;
dest_len = &s->s3->alert_fragment_len;
}
#ifndef OPENSSL_NO_HEARTBEATS
else if (rr->type == TLS1_RT_HEARTBEAT) {
tls1_process_heartbeat(s);
/* Exit and notify application to read again */
rr->length = 0;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
return (-1);
}
#endif
if (dest_maxlen > 0) {
n = dest_maxlen - *dest_len; /* available space in 'dest' */
if (rr->length < n)
n = rr->length; /* available bytes */
/* now move 'n' bytes: */
while (n-- > 0) {
dest[(*dest_len)++] = rr->data[rr->off++];
rr->length--;
}
if (*dest_len < dest_maxlen)
goto start; /* fragment was too small */
}
}
/*-
* s->s3->handshake_fragment_len == 4 iff rr->type == SSL3_RT_HANDSHAKE;
* s->s3->alert_fragment_len == 2 iff rr->type == SSL3_RT_ALERT.
* (Possibly rr is 'empty' now, i.e. rr->length may be 0.)
*/
/* If we are a client, check for an incoming 'Hello Request': */
if ((!s->server) &&
(s->s3->handshake_fragment_len >= 4) &&
(s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
(s->session != NULL) && (s->session->cipher != NULL)) {
s->s3->handshake_fragment_len = 0;
if ((s->s3->handshake_fragment[1] != 0) ||
(s->s3->handshake_fragment[2] != 0) ||
(s->s3->handshake_fragment[3] != 0)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_BAD_HELLO_REQUEST);
goto f_err;
}
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
s->s3->handshake_fragment, 4, s,
s->msg_callback_arg);
if (SSL_is_init_finished(s) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
!s->s3->renegotiate) {
ssl3_renegotiate(s);
if (ssl3_renegotiate_check(s)) {
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES,
SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (s->s3->rbuf.left == 0) { /* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data,
* but we trigger an SSL handshake, we return -1 with
* the retry option set. Otherwise renegotiation may
* cause nasty problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
}
}
/*
* we either finished a handshake or ignored the request, now try
* again to obtain the (application) data we were asked for
*/
goto start;
}
/*
* If we are a server and get a client hello when renegotiation isn't
* allowed send back a no renegotiation alert and carry on. WARNING:
* experimental code, needs reviewing (steve)
*/
if (s->server &&
SSL_is_init_finished(s) &&
!s->s3->send_connection_binding &&
(s->version > SSL3_VERSION) &&
(s->s3->handshake_fragment_len >= 4) &&
(s->s3->handshake_fragment[0] == SSL3_MT_CLIENT_HELLO) &&
(s->session != NULL) && (s->session->cipher != NULL) &&
!(s->ctx->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) {
/*
* s->s3->handshake_fragment_len = 0;
*/
rr->length = 0;
ssl3_send_alert(s, SSL3_AL_WARNING, SSL_AD_NO_RENEGOTIATION);
goto start;
}
if (s->s3->alert_fragment_len >= 2) {
int alert_level = s->s3->alert_fragment[0];
int alert_descr = s->s3->alert_fragment[1];
s->s3->alert_fragment_len = 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_ALERT,
s->s3->alert_fragment, 2, s, s->msg_callback_arg);
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
if (cb != NULL) {
j = (alert_level << 8) | alert_descr;
cb(s, SSL_CB_READ_ALERT, j);
}
if (alert_level == SSL3_AL_WARNING) {
s->s3->warn_alert = alert_descr;
if (alert_descr == SSL_AD_CLOSE_NOTIFY) {
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
return (0);
}
/*
* This is a warning but we receive it if we requested
* renegotiation and the peer denied it. Terminate with a fatal
* alert because if application tried to renegotiatie it
* presumably had a good reason and expects it to succeed. In
* future we might have a renegotiation where we don't care if
* the peer refused it where we carry on.
*/
else if (alert_descr == SSL_AD_NO_RENEGOTIATION) {
al = SSL_AD_HANDSHAKE_FAILURE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_NO_RENEGOTIATION);
goto f_err;
}
#ifdef SSL_AD_MISSING_SRP_USERNAME
else if (alert_descr == SSL_AD_MISSING_SRP_USERNAME)
return (0);
#endif
} else if (alert_level == SSL3_AL_FATAL) {
char tmp[16];
s->rwstate = SSL_NOTHING;
s->s3->fatal_alert = alert_descr;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
BIO_snprintf(tmp, sizeof tmp, "%d", alert_descr);
ERR_add_error_data(2, "SSL alert number ", tmp);
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
SSL_CTX_remove_session(s->ctx, s->session);
return (0);
} else {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNKNOWN_ALERT_TYPE);
goto f_err;
}
goto start;
}
if (s->shutdown & SSL_SENT_SHUTDOWN) { /* but we have not received a
* shutdown */
s->rwstate = SSL_NOTHING;
rr->length = 0;
return (0);
}
if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) {
/*
* 'Change Cipher Spec' is just a single byte, so we know exactly
* what the record payload has to look like
*/
if ((rr->length != 1) || (rr->off != 0) ||
(rr->data[0] != SSL3_MT_CCS)) {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_BAD_CHANGE_CIPHER_SPEC);
goto f_err;
}
/* Check we have a cipher to change to */
if (s->s3->tmp.new_cipher == NULL) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_CCS_RECEIVED_EARLY);
goto f_err;
}
if (!(s->s3->flags & SSL3_FLAGS_CCS_OK)) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_CCS_RECEIVED_EARLY);
goto f_err;
}
s->s3->flags &= ~SSL3_FLAGS_CCS_OK;
rr->length = 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
rr->data, 1, s, s->msg_callback_arg);
s->s3->change_cipher_spec = 1;
if (!ssl3_do_change_cipher_spec(s))
goto err;
else
goto start;
}
/*
* Unexpected handshake message (Client Hello, or protocol violation)
*/
if ((s->s3->handshake_fragment_len >= 4) && !s->in_handshake) {
if (((s->state & SSL_ST_MASK) == SSL_ST_OK) &&
!(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS)) {
#if 0 /* worked only because C operator preferences
* are not as expected (and because this is
* not really needed for clients except for
* detecting protocol violations): */
s->state = SSL_ST_BEFORE | (s->server)
? SSL_ST_ACCEPT : SSL_ST_CONNECT;
#else
s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
#endif
s->renegotiate = 1;
s->new_session = 1;
}
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
if (!(s->mode & SSL_MODE_AUTO_RETRY)) {
if (s->s3->rbuf.left == 0) { /* no read-ahead left? */
BIO *bio;
/*
* In the case where we try to read application data, but we
* trigger an SSL handshake, we return -1 with the retry
* option set. Otherwise renegotiation may cause nasty
* problems in the blocking world
*/
s->rwstate = SSL_READING;
bio = SSL_get_rbio(s);
BIO_clear_retry_flags(bio);
BIO_set_retry_read(bio);
return (-1);
}
}
goto start;
}
switch (rr->type) {
default:
#ifndef OPENSSL_NO_TLS
/*
* TLS up to v1.1 just ignores unknown message types: TLS v1.2 give
* an unexpected message alert.
*/
if (s->version >= TLS1_VERSION && s->version <= TLS1_1_VERSION) {
rr->length = 0;
goto start;
}
#endif
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
case SSL3_RT_CHANGE_CIPHER_SPEC:
case SSL3_RT_ALERT:
case SSL3_RT_HANDSHAKE:
/*
* we already handled all of these, with the possible exception of
* SSL3_RT_HANDSHAKE when s->in_handshake is set, but that should not
* happen when type != rr->type
*/
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, ERR_R_INTERNAL_ERROR);
goto f_err;
case SSL3_RT_APPLICATION_DATA:
/*
* At this point, we were expecting handshake data, but have
* application data. If the library was running inside ssl3_read()
* (i.e. in_read_app_data is set) and it makes sense to read
* application data at this point (session renegotiation not yet
* started), we will indulge it.
*/
if (s->s3->in_read_app_data &&
(s->s3->total_renegotiations != 0) &&
(((s->state & SSL_ST_CONNECT) &&
(s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
(s->state <= SSL3_ST_CR_SRVR_HELLO_A)
) || ((s->state & SSL_ST_ACCEPT) &&
(s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
(s->state >= SSL3_ST_SR_CLNT_HELLO_A)
)
)) {
s->s3->in_read_app_data = 2;
return (-1);
} else {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNEXPECTED_RECORD);
goto f_err;
}
}
/* not reached */
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return (-1);
}
int ssl3_do_change_cipher_spec(SSL *s)
{
int i;
const char *sender;
int slen;
if (s->state & SSL_ST_ACCEPT)
i = SSL3_CHANGE_CIPHER_SERVER_READ;
else
i = SSL3_CHANGE_CIPHER_CLIENT_READ;
if (s->s3->tmp.key_block == NULL) {
if (s->session == NULL || s->session->master_key_length == 0) {
/* might happen if dtls1_read_bytes() calls this */
SSLerr(SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC,
SSL_R_CCS_RECEIVED_EARLY);
return (0);
}
s->session->cipher = s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s))
return (0);
}
if (!s->method->ssl3_enc->change_cipher_state(s, i))
return (0);
/*
* we have to record the message digest at this point so we can get it
* before we read the finished message
*/
if (s->state & SSL_ST_CONNECT) {
sender = s->method->ssl3_enc->server_finished_label;
slen = s->method->ssl3_enc->server_finished_label_len;
} else {
sender = s->method->ssl3_enc->client_finished_label;
slen = s->method->ssl3_enc->client_finished_label_len;
}
i = s->method->ssl3_enc->final_finish_mac(s,
sender, slen,
s->s3->tmp.peer_finish_md);
if (i == 0) {
SSLerr(SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC, ERR_R_INTERNAL_ERROR);
return 0;
}
s->s3->tmp.peer_finish_md_len = i;
return (1);
}
int ssl3_send_alert(SSL *s, int level, int desc)
{
/* Map tls/ssl alert value to correct one */
desc = s->method->ssl3_enc->alert_value(desc);
if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION)
desc = SSL_AD_HANDSHAKE_FAILURE; /* SSL 3.0 does not have
* protocol_version alerts */
if (desc < 0)
return -1;
/* If a fatal one, remove from cache */
if ((level == 2) && (s->session != NULL))
SSL_CTX_remove_session(s->ctx, s->session);
s->s3->alert_dispatch = 1;
s->s3->send_alert[0] = level;
s->s3->send_alert[1] = desc;
if (s->s3->wbuf.left == 0) /* data still being written out? */
return s->method->ssl_dispatch_alert(s);
/*
* else data is still being written out, we will get written some time in
* the future
*/
return -1;
}
int ssl3_dispatch_alert(SSL *s)
{
int i, j;
void (*cb) (const SSL *ssl, int type, int val) = NULL;
s->s3->alert_dispatch = 0;
i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0);
if (i <= 0) {
s->s3->alert_dispatch = 1;
} else {
/*
* Alert sent to BIO. If it is important, flush it now. If the
* message does not get sent due to non-blocking IO, we will not
* worry too much.
*/
if (s->s3->send_alert[0] == SSL3_AL_FATAL)
(void)BIO_flush(s->wbio);
if (s->msg_callback)
s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert,
2, s, s->msg_callback_arg);
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
if (cb != NULL) {
j = (s->s3->send_alert[0] << 8) | s->s3->send_alert[1];
cb(s, SSL_CB_WRITE_ALERT, j);
}
}
return (i);
}
Computing file changes ...
