swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: a0d271cbfed1dd50278c6b06bead3d00ba0a88f9 authored by Linus Torvalds on 30 September 2012, 23:47:46 UTC
Linux 3.6
Linux 3.6
Tip revision: a0d271c
nbd.txt
Network Block Device (TCP version)
What is it: With this compiled in the kernel (or as a module), Linux
can use a remote server as one of its block devices. So every time
the client computer wants to read, e.g., /dev/nb0, it sends a
request over TCP to the server, which will reply with the data read.
This can be used for stations with low disk space (or even diskless -
if you boot from floppy) to borrow disk space from another computer.
Unlike NFS, it is possible to put any filesystem on it, etc. It should
even be possible to use NBD as a root filesystem (I've never tried),
but it requires a user-level program to be in the initrd to start.
It also allows you to run block-device in user land (making server
and client physically the same computer, communicating using loopback).
Current state: It currently works. Network block device is stable.
I originally thought that it was impossible to swap over TCP. It
turned out not to be true - swapping over TCP now works and seems
to be deadlock-free, but it requires heavy patches into Linux's
network layer.
For more information, or to download the nbd-client and nbd-server
tools, go to http://nbd.sf.net/.
Howto: To setup nbd, you can simply do the following:
First, serve a device or file from a remote server:
nbd-server <port-number> <device-or-file-to-serve-to-client>
e.g.,
root@server1 # nbd-server 1234 /dev/sdb1
(serves sdb1 partition on TCP port 1234)
Then, on the local (client) system:
nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
e.g.,
root@client1 # nbd-client server1 1234 /dev/nb0
(creates the nb0 device on client1)
The nbd kernel module need only be installed on the client
system, as the nbd-server is completely in userspace. In fact,
the nbd-server has been successfully ported to other operating
systems, including Windows.