swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: bfe01a5ba2490f299e1d2d5508cbbbadd897bbe9 authored by Linus Torvalds on 05 October 2014, 19:23:04 UTC
Linux 3.17
Linux 3.17
Tip revision: bfe01a5
ads1015
Kernel driver ads1015
=====================
Supported chips:
* Texas Instruments ADS1015
Prefix: 'ads1015'
Datasheet: Publicly available at the Texas Instruments website :
http://focus.ti.com/lit/ds/symlink/ads1015.pdf
* Texas Instruments ADS1115
Prefix: 'ads1115'
Datasheet: Publicly available at the Texas Instruments website :
http://focus.ti.com/lit/ds/symlink/ads1115.pdf
Authors:
Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
Description
-----------
This driver implements support for the Texas Instruments ADS1015/ADS1115.
This device is a 12/16-bit A-D converter with 4 inputs.
The inputs can be used single ended or in certain differential combinations.
The inputs can be made available by 8 sysfs input files in0_input - in7_input:
in0: Voltage over AIN0 and AIN1.
in1: Voltage over AIN0 and AIN3.
in2: Voltage over AIN1 and AIN3.
in3: Voltage over AIN2 and AIN3.
in4: Voltage over AIN0 and GND.
in5: Voltage over AIN1 and GND.
in6: Voltage over AIN2 and GND.
in7: Voltage over AIN3 and GND.
Which inputs are available can be configured using platform data or devicetree.
By default all inputs are exported.
Platform Data
-------------
In linux/i2c/ads1015.h platform data is defined, channel_data contains
configuration data for the used input combinations:
- pga is the programmable gain amplifier (values are full scale)
0: +/- 6.144 V
1: +/- 4.096 V
2: +/- 2.048 V
3: +/- 1.024 V
4: +/- 0.512 V
5: +/- 0.256 V
- data_rate in samples per second
0: 128
1: 250
2: 490
3: 920
4: 1600
5: 2400
6: 3300
Example:
struct ads1015_platform_data data = {
.channel_data = {
[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
}
};
In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
(FS +/- 0.512 V, 2400 SPS) would be created.
Devicetree
----------
Configuration is also possible via devicetree:
Documentation/devicetree/bindings/hwmon/ads1015.txt