swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: da0c9ea146cbe92b832f1b0f694840ea8eb33cce authored by Linus Torvalds on 06 October 2019, 21:27:30 UTC
Linux 5.4-rc2
Linux 5.4-rc2
Tip revision: da0c9ea
ir35221.rst
Kernel driver ir35221
=====================
Supported chips:
* Infineon IR35221
Prefix: 'ir35221'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Description
-----------
IR35221 is a Digital DC-DC Multiphase Converter
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an IR35221
at address 0x70 on I2C bus #4::
# modprobe ir35221
# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
Sysfs attributes
----------------
======================= =======================================================
curr1_label "iin"
curr1_input Measured input current
curr1_max Maximum current
curr1_max_alarm Current high alarm
curr[2-3]_label "iout[1-2]"
curr[2-3]_input Measured output current
curr[2-3]_crit Critical maximum current
curr[2-3]_crit_alarm Current critical high alarm
curr[2-3]_highest Highest output current
curr[2-3]_lowest Lowest output current
curr[2-3]_max Maximum current
curr[2-3]_max_alarm Current high alarm
in1_label "vin"
in1_input Measured input voltage
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
in1_highest Highest input voltage
in1_lowest Lowest input voltage
in1_min Minimum input voltage
in1_min_alarm Input voltage low alarm
in[2-3]_label "vout[1-2]"
in[2-3]_input Measured output voltage
in[2-3]_lcrit Critical minimum output voltage
in[2-3]_lcrit_alarm Output voltage critical low alarm
in[2-3]_crit Critical maximum output voltage
in[2-3]_crit_alarm Output voltage critical high alarm
in[2-3]_highest Highest output voltage
in[2-3]_lowest Lowest output voltage
in[2-3]_max Maximum output voltage
in[2-3]_max_alarm Output voltage high alarm
in[2-3]_min Minimum output voltage
in[2-3]_min_alarm Output voltage low alarm
power1_label "pin"
power1_input Measured input power
power1_alarm Input power high alarm
power1_max Input power limit
power[2-3]_label "pout[1-2]"
power[2-3]_input Measured output power
power[2-3]_max Output power limit
power[2-3]_max_alarm Output power high alarm
temp[1-2]_input Measured temperature
temp[1-2]_crit Critical high temperature
temp[1-2]_crit_alarm Chip temperature critical high alarm
temp[1-2]_highest Highest temperature
temp[1-2]_lowest Lowest temperature
temp[1-2]_max Maximum temperature
temp[1-2]_max_alarm Chip temperature high alarm
======================= =======================================================