swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Raw File
Tip revision: 8f0d8163b50e01f398b14bcd4dc039ac5ab18d64 authored by Linus Torvalds on 28 October 2012, 19:24:48 UTC
Linux 3.7-rc3
Tip revision: 8f0d816
ltc4151
Kernel driver ltc4151
=====================

Supported chips:
  * Linear Technology LTC4151
    Prefix: 'ltc4151'
    Addresses scanned: -
    Datasheet:
        http://www.linear.com/docs/Datasheet/4151fc.pdf

Author: Per Dalen <per.dalen@appeartv.com>


Description
-----------

The LTC4151 is a High Voltage I2C Current and Voltage Monitor.


Usage Notes
-----------

This driver does not probe for LTC4151 devices, since there is no register
which can be safely used to identify the chip. You will have to instantiate
the devices explicitly.

Example: the following will load the driver for an LTC4151 at address 0x6f
on I2C bus #0:
# modprobe ltc4151
# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device


Sysfs entries
-------------

Voltage readings provided by this driver are reported as obtained from the ADIN
and VIN registers.

Current reading provided by this driver is reported as obtained from the Current
Sense register. The reported value assumes that a 1 mOhm sense resistor is
installed.

in1_input		VDIN voltage (mV)

in2_input		ADIN voltage (mV)

curr1_input		SENSE current (mA)
back to top