swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Raw File
Tip revision: 1e28eed17697bcf343c6743f0028cc3b5dd88bf0 authored by Linus Torvalds on 14 March 2021, 21:41:02 UTC
Linux 5.12-rc3
Tip revision: 1e28eed
sl28cpld.rst
.. SPDX-License-Identifier: GPL-2.0-only

Kernel driver sl28cpld
======================

Supported chips:

   * Kontron sl28cpld

     Prefix: 'sl28cpld'

     Datasheet: not available

Authors: Michael Walle <michael@walle.cc>

Description
-----------

The sl28cpld is a board management controller which also exposes a hardware
monitoring controller. At the moment this controller supports a single fan
supervisor. In the future there might be other flavours and additional
hardware monitoring might be supported.

The fan supervisor has a 7 bit counter register and a counter period of 1
second. If the 7 bit counter overflows, the supervisor will automatically
switch to x8 mode to support a wider input range at the loss of
granularity.

Sysfs entries
-------------

The following attributes are supported.

======================= ========================================================
fan1_input		Fan RPM. Assuming 2 pulses per revolution.
======================= ========================================================
back to top