swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 11ba468877bb23f28956a35e896356252d63c983 authored by Linus Torvalds on 12 July 2020, 23:34:50 UTC
Linux 5.8-rc5
Linux 5.8-rc5
Tip revision: 11ba468
numa.rst
.. _numa:
Started Nov 1999 by Kanoj Sarcar <kanoj@sgi.com>
=============
What is NUMA?
=============
This question can be answered from a couple of perspectives: the
hardware view and the Linux software view.
From the hardware perspective, a NUMA system is a computer platform that
comprises multiple components or assemblies each of which may contain 0
or more CPUs, local memory, and/or IO buses. For brevity and to
disambiguate the hardware view of these physical components/assemblies
from the software abstraction thereof, we'll call the components/assemblies
'cells' in this document.
Each of the 'cells' may be viewed as an SMP [symmetric multi-processor] subset
of the system--although some components necessary for a stand-alone SMP system
may not be populated on any given cell. The cells of the NUMA system are
connected together with some sort of system interconnect--e.g., a crossbar or
point-to-point link are common types of NUMA system interconnects. Both of
these types of interconnects can be aggregated to create NUMA platforms with
cells at multiple distances from other cells.
For Linux, the NUMA platforms of interest are primarily what is known as Cache
Coherent NUMA or ccNUMA systems. With ccNUMA systems, all memory is visible
to and accessible from any CPU attached to any cell and cache coherency
is handled in hardware by the processor caches and/or the system interconnect.
Memory access time and effective memory bandwidth varies depending on how far
away the cell containing the CPU or IO bus making the memory access is from the
cell containing the target memory. For example, access to memory by CPUs
attached to the same cell will experience faster access times and higher
bandwidths than accesses to memory on other, remote cells. NUMA platforms
can have cells at multiple remote distances from any given cell.
Platform vendors don't build NUMA systems just to make software developers'
lives interesting. Rather, this architecture is a means to provide scalable
memory bandwidth. However, to achieve scalable memory bandwidth, system and
application software must arrange for a large majority of the memory references
[cache misses] to be to "local" memory--memory on the same cell, if any--or
to the closest cell with memory.
This leads to the Linux software view of a NUMA system:
Linux divides the system's hardware resources into multiple software
abstractions called "nodes". Linux maps the nodes onto the physical cells
of the hardware platform, abstracting away some of the details for some
architectures. As with physical cells, software nodes may contain 0 or more
CPUs, memory and/or IO buses. And, again, memory accesses to memory on
"closer" nodes--nodes that map to closer cells--will generally experience
faster access times and higher effective bandwidth than accesses to more
remote cells.
For some architectures, such as x86, Linux will "hide" any node representing a
physical cell that has no memory attached, and reassign any CPUs attached to
that cell to a node representing a cell that does have memory. Thus, on
these architectures, one cannot assume that all CPUs that Linux associates with
a given node will see the same local memory access times and bandwidth.
In addition, for some architectures, again x86 is an example, Linux supports
the emulation of additional nodes. For NUMA emulation, linux will carve up
the existing nodes--or the system memory for non-NUMA platforms--into multiple
nodes. Each emulated node will manage a fraction of the underlying cells'
physical memory. NUMA emluation is useful for testing NUMA kernel and
application features on non-NUMA platforms, and as a sort of memory resource
management mechanism when used together with cpusets.
[see Documentation/admin-guide/cgroup-v1/cpusets.rst]
For each node with memory, Linux constructs an independent memory management
subsystem, complete with its own free page lists, in-use page lists, usage
statistics and locks to mediate access. In addition, Linux constructs for
each memory zone [one or more of DMA, DMA32, NORMAL, HIGH_MEMORY, MOVABLE],
an ordered "zonelist". A zonelist specifies the zones/nodes to visit when a
selected zone/node cannot satisfy the allocation request. This situation,
when a zone has no available memory to satisfy a request, is called
"overflow" or "fallback".
Because some nodes contain multiple zones containing different types of
memory, Linux must decide whether to order the zonelists such that allocations
fall back to the same zone type on a different node, or to a different zone
type on the same node. This is an important consideration because some zones,
such as DMA or DMA32, represent relatively scarce resources. Linux chooses
a default Node ordered zonelist. This means it tries to fallback to other zones
from the same node before using remote nodes which are ordered by NUMA distance.
By default, Linux will attempt to satisfy memory allocation requests from the
node to which the CPU that executes the request is assigned. Specifically,
Linux will attempt to allocate from the first node in the appropriate zonelist
for the node where the request originates. This is called "local allocation."
If the "local" node cannot satisfy the request, the kernel will examine other
nodes' zones in the selected zonelist looking for the first zone in the list
that can satisfy the request.
Local allocation will tend to keep subsequent access to the allocated memory
"local" to the underlying physical resources and off the system interconnect--
as long as the task on whose behalf the kernel allocated some memory does not
later migrate away from that memory. The Linux scheduler is aware of the
NUMA topology of the platform--embodied in the "scheduling domains" data
structures [see Documentation/scheduler/sched-domains.rst]--and the scheduler
attempts to minimize task migration to distant scheduling domains. However,
the scheduler does not take a task's NUMA footprint into account directly.
Thus, under sufficient imbalance, tasks can migrate between nodes, remote
from their initial node and kernel data structures.
System administrators and application designers can restrict a task's migration
to improve NUMA locality using various CPU affinity command line interfaces,
such as taskset(1) and numactl(1), and program interfaces such as
sched_setaffinity(2). Further, one can modify the kernel's default local
allocation behavior using Linux NUMA memory policy. [see
:ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`].
System administrators can restrict the CPUs and nodes' memories that a non-
privileged user can specify in the scheduling or NUMA commands and functions
using control groups and CPUsets. [see Documentation/admin-guide/cgroup-v1/cpusets.rst]
On architectures that do not hide memoryless nodes, Linux will include only
zones [nodes] with memory in the zonelists. This means that for a memoryless
node the "local memory node"--the node of the first zone in CPU's node's
zonelist--will not be the node itself. Rather, it will be the node that the
kernel selected as the nearest node with memory when it built the zonelists.
So, default, local allocations will succeed with the kernel supplying the
closest available memory. This is a consequence of the same mechanism that
allows such allocations to fallback to other nearby nodes when a node that
does contain memory overflows.
Some kernel allocations do not want or cannot tolerate this allocation fallback
behavior. Rather they want to be sure they get memory from the specified node
or get notified that the node has no free memory. This is usually the case when
a subsystem allocates per CPU memory resources, for example.
A typical model for making such an allocation is to obtain the node id of the
node to which the "current CPU" is attached using one of the kernel's
numa_node_id() or CPU_to_node() functions and then request memory from only
the node id returned. When such an allocation fails, the requesting subsystem
may revert to its own fallback path. The slab kernel memory allocator is an
example of this. Or, the subsystem may choose to disable or not to enable
itself on allocation failure. The kernel profiling subsystem is an example of
this.
If the architecture supports--does not hide--memoryless nodes, then CPUs
attached to memoryless nodes would always incur the fallback path overhead
or some subsystems would fail to initialize if they attempted to allocated
memory exclusively from a node without memory. To support such
architectures transparently, kernel subsystems can use the numa_mem_id()
or cpu_to_mem() function to locate the "local memory node" for the calling or
specified CPU. Again, this is the same node from which default, local page
allocations will be attempted.