swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 4d856f72c10ecb060868ed10ff1b1453943fc6c8 authored by Linus Torvalds on 15 September 2019, 21:19:32 UTC
Linux 5.3
Linux 5.3
Tip revision: 4d856f7
Makefile
#
# arch/arm64/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
GZFLAGS :=-9
ifeq ($(CONFIG_RELOCATABLE), y)
# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
# for relative relocs, since this leads to better Image compression
# with the relocation offsets always being zero.
LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro \
$(call ld-option, --no-apply-dynamic-relocs)
endif
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
ifeq ($(call ld-option, --fix-cortex-a53-843419),)
$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum)
else
LDFLAGS_vmlinux += --fix-cortex-a53-843419
endif
endif
# Check for binutils support for specific extensions
lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1)
ifeq ($(CONFIG_ARM64_LSE_ATOMICS), y)
ifeq ($(lseinstr),)
$(warning LSE atomics not supported by binutils)
endif
endif
ifeq ($(CONFIG_ARM64), y)
brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1)
ifneq ($(brokengasinst),)
$(warning Detected assembler with broken .inst; disassembly will be unreliable)
endif
endif
ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y)
CROSS_COMPILE_COMPAT ?= $(CONFIG_CROSS_COMPILE_COMPAT_VDSO:"%"=%)
ifeq ($(CONFIG_CC_IS_CLANG), y)
$(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built)
else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),)
$(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built)
else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),)
$(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT)
else
export CROSS_COMPILE_COMPAT
export CONFIG_COMPAT_VDSO := y
compat_vdso := -DCONFIG_COMPAT_VDSO=1
endif
endif
KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) $(compat_vdso)
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
KBUILD_CFLAGS += $(call cc-disable-warning, psabi)
KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) $(compat_vdso)
KBUILD_CFLAGS += $(call cc-option,-mabi=lp64)
KBUILD_AFLAGS += $(call cc-option,-mabi=lp64)
ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
prepare: stack_protector_prepare
stack_protector_prepare: prepare0
$(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg \
-mstack-protector-guard-reg=sp_el0 \
-mstack-protector-guard-offset=$(shell \
awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
include/generated/asm-offsets.h))
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS += -mbig-endian
CHECKFLAGS += -D__AARCH64EB__
AS += -EB
# Prefer the baremetal ELF build target, but not all toolchains include
# it so fall back to the standard linux version if needed.
KBUILD_LDFLAGS += -EB $(call ld-option, -maarch64elfb, -maarch64linuxb)
UTS_MACHINE := aarch64_be
else
KBUILD_CPPFLAGS += -mlittle-endian
CHECKFLAGS += -D__AARCH64EL__
AS += -EL
# Same as above, prefer ELF but fall back to linux target if needed.
KBUILD_LDFLAGS += -EL $(call ld-option, -maarch64elf, -maarch64linux)
UTS_MACHINE := aarch64
endif
CHECKFLAGS += -D__aarch64__
ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm64/kernel/module.lds
endif
# Default value
head-y := arch/arm64/kernel/head.o
# The byte offset of the kernel image in RAM from the start of RAM.
ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
else
TEXT_OFFSET := 0x00080000
endif
ifeq ($(CONFIG_KASAN_SW_TAGS), y)
KASAN_SHADOW_SCALE_SHIFT := 4
else
KASAN_SHADOW_SCALE_SHIFT := 3
endif
KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT))
# - (1 << (64 - KASAN_SHADOW_SCALE_SHIFT))
# in 32-bit arithmetic
KASAN_SHADOW_OFFSET := $(shell printf "0x%08x00000000\n" $$(( \
(0xffffffff & (-1 << ($(CONFIG_ARM64_VA_BITS) - 32))) \
+ (1 << ($(CONFIG_ARM64_VA_BITS) - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) \
- (1 << (64 - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) )) )
export TEXT_OFFSET GZFLAGS
core-y += arch/arm64/kernel/ arch/arm64/mm/
core-$(CONFIG_NET) += arch/arm64/net/
core-$(CONFIG_KVM) += arch/arm64/kvm/
core-$(CONFIG_XEN) += arch/arm64/xen/
core-$(CONFIG_CRYPTO) += arch/arm64/crypto/
libs-y := arch/arm64/lib/ $(libs-y)
core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
all: Image.gz
Image: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
# Therefore we need to generate the header after prepare0 has been made, hence
# this hack.
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
$(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \
$(build)=arch/arm64/kernel/vdso32 \
include/generated/vdso32-offsets.h)
endif
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
endef