swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 4f5cafb5cb8471e54afdc9054d973535614f7675 authored by Linus Torvalds on 13 October 2019, 23:37:36 UTC
Linux 5.4-rc3
Linux 5.4-rc3
Tip revision: 4f5cafb
cache.S
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Cache maintenance
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Copyright (C) 2012 ARM Ltd.
*/
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
#include <asm/asm-uaccess.h>
/*
* flush_icache_range(start,end)
*
* Ensure that the I and D caches are coherent within specified region.
* This is typically used when code has been written to a memory region,
* and will be executed.
*
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(__flush_icache_range)
/* FALLTHROUGH */
/*
* __flush_cache_user_range(start,end)
*
* Ensure that the I and D caches are coherent within specified region.
* This is typically used when code has been written to a memory region,
* and will be executed.
*
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(__flush_cache_user_range)
uaccess_ttbr0_enable x2, x3, x4
alternative_if ARM64_HAS_CACHE_IDC
dsb ishst
b 7f
alternative_else_nop_endif
dcache_line_size x2, x3
sub x3, x2, #1
bic x4, x0, x3
1:
user_alt 9f, "dc cvau, x4", "dc civac, x4", ARM64_WORKAROUND_CLEAN_CACHE
add x4, x4, x2
cmp x4, x1
b.lo 1b
dsb ish
7:
alternative_if ARM64_HAS_CACHE_DIC
isb
b 8f
alternative_else_nop_endif
invalidate_icache_by_line x0, x1, x2, x3, 9f
8: mov x0, #0
1:
uaccess_ttbr0_disable x1, x2
ret
9:
mov x0, #-EFAULT
b 1b
ENDPROC(__flush_icache_range)
ENDPROC(__flush_cache_user_range)
/*
* invalidate_icache_range(start,end)
*
* Ensure that the I cache is invalid within specified region.
*
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(invalidate_icache_range)
alternative_if ARM64_HAS_CACHE_DIC
mov x0, xzr
isb
ret
alternative_else_nop_endif
uaccess_ttbr0_enable x2, x3, x4
invalidate_icache_by_line x0, x1, x2, x3, 2f
mov x0, xzr
1:
uaccess_ttbr0_disable x1, x2
ret
2:
mov x0, #-EFAULT
b 1b
ENDPROC(invalidate_icache_range)
/*
* __flush_dcache_area(kaddr, size)
*
* Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
* are cleaned and invalidated to the PoC.
*
* - kaddr - kernel address
* - size - size in question
*/
ENTRY(__flush_dcache_area)
dcache_by_line_op civac, sy, x0, x1, x2, x3
ret
ENDPIPROC(__flush_dcache_area)
/*
* __clean_dcache_area_pou(kaddr, size)
*
* Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
* are cleaned to the PoU.
*
* - kaddr - kernel address
* - size - size in question
*/
ENTRY(__clean_dcache_area_pou)
alternative_if ARM64_HAS_CACHE_IDC
dsb ishst
ret
alternative_else_nop_endif
dcache_by_line_op cvau, ish, x0, x1, x2, x3
ret
ENDPROC(__clean_dcache_area_pou)
/*
* __inval_dcache_area(kaddr, size)
*
* Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
* are invalidated. Any partial lines at the ends of the interval are
* also cleaned to PoC to prevent data loss.
*
* - kaddr - kernel address
* - size - size in question
*/
ENTRY(__inval_dcache_area)
/* FALLTHROUGH */
/*
* __dma_inv_area(start, size)
* - start - virtual start address of region
* - size - size in question
*/
__dma_inv_area:
add x1, x1, x0
dcache_line_size x2, x3
sub x3, x2, #1
tst x1, x3 // end cache line aligned?
bic x1, x1, x3
b.eq 1f
dc civac, x1 // clean & invalidate D / U line
1: tst x0, x3 // start cache line aligned?
bic x0, x0, x3
b.eq 2f
dc civac, x0 // clean & invalidate D / U line
b 3f
2: dc ivac, x0 // invalidate D / U line
3: add x0, x0, x2
cmp x0, x1
b.lo 2b
dsb sy
ret
ENDPIPROC(__inval_dcache_area)
ENDPROC(__dma_inv_area)
/*
* __clean_dcache_area_poc(kaddr, size)
*
* Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
* are cleaned to the PoC.
*
* - kaddr - kernel address
* - size - size in question
*/
ENTRY(__clean_dcache_area_poc)
/* FALLTHROUGH */
/*
* __dma_clean_area(start, size)
* - start - virtual start address of region
* - size - size in question
*/
__dma_clean_area:
dcache_by_line_op cvac, sy, x0, x1, x2, x3
ret
ENDPIPROC(__clean_dcache_area_poc)
ENDPROC(__dma_clean_area)
/*
* __clean_dcache_area_pop(kaddr, size)
*
* Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
* are cleaned to the PoP.
*
* - kaddr - kernel address
* - size - size in question
*/
ENTRY(__clean_dcache_area_pop)
alternative_if_not ARM64_HAS_DCPOP
b __clean_dcache_area_poc
alternative_else_nop_endif
dcache_by_line_op cvap, sy, x0, x1, x2, x3
ret
ENDPIPROC(__clean_dcache_area_pop)
/*
* __dma_flush_area(start, size)
*
* clean & invalidate D / U line
*
* - start - virtual start address of region
* - size - size in question
*/
ENTRY(__dma_flush_area)
dcache_by_line_op civac, sy, x0, x1, x2, x3
ret
ENDPIPROC(__dma_flush_area)
/*
* __dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(__dma_map_area)
cmp w2, #DMA_FROM_DEVICE
b.eq __dma_inv_area
b __dma_clean_area
ENDPIPROC(__dma_map_area)
/*
* __dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(__dma_unmap_area)
cmp w2, #DMA_TO_DEVICE
b.ne __dma_inv_area
ret
ENDPIPROC(__dma_unmap_area)