swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 7dcca30a32aadb0520417521b0c44f42d09fe05c authored by Linus Torvalds on 08 July 2007, 23:32:17 UTC
Linux 2.6.22
Linux 2.6.22
Tip revision: 7dcca30
time.c
/*
* linux/arch/m68k/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/rtc.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/profile.h>
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
static irqreturn_t timer_interrupt(int irq, void *dummy)
{
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
if (mach_heartbeat) {
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
}
#endif /* CONFIG_HEARTBEAT */
return IRQ_HANDLED;
}
void time_init(void)
{
struct rtc_time time;
if (mach_hwclk) {
mach_hwclk(0, &time);
if ((time.tm_year += 1900) < 1970)
time.tm_year += 100;
xtime.tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
time.tm_hour, time.tm_min, time.tm_sec);
xtime.tv_nsec = 0;
}
wall_to_monotonic.tv_sec = -xtime.tv_sec;
mach_sched_init(timer_interrupt);
}
/*
* This version of gettimeofday has near microsecond resolution.
*/
void do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
unsigned long seq;
unsigned long usec, sec;
unsigned long max_ntp_tick = tick_usec - tickadj;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
usec = mach_gettimeoffset();
/*
* If time_adjust is negative then NTP is slowing the clock
* so make sure not to go into next possible interval.
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0))
usec = min(usec, max_ntp_tick);
sec = xtime.tv_sec;
usec += xtime.tv_nsec/1000;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
while (usec >= 1000000) {
usec -= 1000000;
sec++;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
/* This is revolting. We need to set the xtime.tv_nsec
* correctly. However, the value in this location is
* is value at the last tick.
* Discover what correction gettimeofday
* would have done, and then undo it!
*/
nsec -= 1000 * mach_gettimeoffset();
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
}
EXPORT_SYMBOL(do_settimeofday);