swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 9f4ad9e425a1d3b6a34617b8ea226d56a119a717 authored by Linus Torvalds on 25 April 2021, 20:49:08 UTC
Linux 5.12
Linux 5.12
Tip revision: 9f4ad9e
Kconfig
# SPDX-License-Identifier: GPL-2.0-only
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.rst.
#
config 64BIT
bool
config 32BIT
bool
config RISCV
def_bool y
select ARCH_CLOCKSOURCE_INIT
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
select ARCH_STACKWALK
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_DEBUG_VM_PGTABLE
select ARCH_HAS_DEBUG_VIRTUAL if MMU
select ARCH_HAS_DEBUG_WX
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_HAS_KCOV
select ARCH_HAS_MMIOWB
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_SET_DIRECT_MAP
select ARCH_HAS_SET_MEMORY
select ARCH_HAS_STRICT_KERNEL_RWX if MMU
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
select CLONE_BACKWARDS
select CLINT_TIMER if !MMU
select COMMON_CLK
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_SHOW
select GENERIC_LIB_DEVMEM_IS_ALLOWED
select GENERIC_PCI_IOMAP
select GENERIC_PTDUMP if MMU
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER if MMU
select GENERIC_STRNLEN_USER if MMU
select GENERIC_TIME_VSYSCALL if MMU && 64BIT
select HANDLE_DOMAIN_IRQ
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_JUMP_LABEL_RELATIVE
select HAVE_ARCH_KASAN if MMU && 64BIT
select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
select HAVE_ARCH_KGDB
select HAVE_ARCH_KGDB_QXFER_PKT
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_ASM_MODVERSIONS
select HAVE_CONTEXT_TRACKING
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_EBPF_JIT if MMU
select HAVE_FUNCTION_ERROR_INJECTION
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_VDSO if MMU && 64BIT
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_KRETPROBES
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
select IRQ_DOMAIN
select MODULES_USE_ELF_RELA if MODULES
select MODULE_SECTIONS if MODULES
select OF
select OF_EARLY_FLATTREE
select OF_IRQ
select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_INTC
select RISCV_TIMER if RISCV_SBI
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
select UACCESS_MEMCPY if !MMU
config ARCH_MMAP_RND_BITS_MIN
default 18 if 64BIT
default 8
# max bits determined by the following formula:
# VA_BITS - PAGE_SHIFT - 3
config ARCH_MMAP_RND_BITS_MAX
default 24 if 64BIT # SV39 based
default 17
# set if we run in machine mode, cleared if we run in supervisor mode
config RISCV_M_MODE
bool
default !MMU
# set if we are running in S-mode and can use SBI calls
config RISCV_SBI
bool
depends on !RISCV_M_MODE
default y
config MMU
bool "MMU-based Paged Memory Management Support"
default y
help
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
config ZONE_DMA32
bool
default y if 64BIT
config VA_BITS
int
default 32 if 32BIT
default 39 if 64BIT
config PA_BITS
int
default 34 if 32BIT
default 56 if 64BIT
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MAXPHYSMEM_1GB
default 0x80000000 if 64BIT && !MMU
default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
config ARCH_FLATMEM_ENABLE
def_bool !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on MMU
select SPARSEMEM_STATIC if 32BIT && SPARSEMEM
select SPARSEMEM_VMEMMAP_ENABLE if 64BIT
config ARCH_SELECT_MEMORY_MODEL
def_bool ARCH_SPARSEMEM_ENABLE
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
config ARCH_SUPPORTS_UPROBES
def_bool y
config SYS_SUPPORTS_HUGETLBFS
depends on MMU
def_bool y
config STACKTRACE_SUPPORT
def_bool y
config TRACE_IRQFLAGS_SUPPORT
def_bool y
config GENERIC_BUG
def_bool y
depends on BUG
select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
config GENERIC_BUG_RELATIVE_POINTERS
bool
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_CSUM
def_bool y
config GENERIC_HWEIGHT
def_bool y
config FIX_EARLYCON_MEM
def_bool MMU
config PGTABLE_LEVELS
int
default 3 if 64BIT
default 2
config LOCKDEP_SUPPORT
def_bool y
source "arch/riscv/Kconfig.socs"
menu "Platform type"
choice
prompt "Base ISA"
default ARCH_RV64I
help
This selects the base ISA that this kernel will target and must match
the target platform.
config ARCH_RV32I
bool "RV32I"
select 32BIT
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_LSHRDI3
select GENERIC_LIB_UCMPDI2
select MMU
config ARCH_RV64I
bool "RV64I"
select 64BIT
select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && GCC_VERSION >= 50000
select HAVE_DYNAMIC_FTRACE if MMU
select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select SWIOTLB if MMU
endchoice
# We must be able to map all physical memory into the kernel, but the compiler
# is still a bit more efficient when generating code if it's setup in a manner
# such that it can only map 2GiB of memory.
choice
prompt "Kernel Code Model"
default CMODEL_MEDLOW if 32BIT
default CMODEL_MEDANY if 64BIT
config CMODEL_MEDLOW
bool "medium low code model"
config CMODEL_MEDANY
bool "medium any code model"
endchoice
config MODULE_SECTIONS
bool
select HAVE_MOD_ARCH_SPECIFIC
choice
prompt "Maximum Physical Memory"
default MAXPHYSMEM_1GB if 32BIT
default MAXPHYSMEM_2GB if 64BIT && CMODEL_MEDLOW
default MAXPHYSMEM_128GB if 64BIT && CMODEL_MEDANY
config MAXPHYSMEM_1GB
depends on 32BIT
bool "1GiB"
config MAXPHYSMEM_2GB
depends on 64BIT && CMODEL_MEDLOW
bool "2GiB"
config MAXPHYSMEM_128GB
depends on 64BIT && CMODEL_MEDANY
bool "128GiB"
endchoice
config SMP
bool "Symmetric Multi-Processing"
help
This enables support for systems with more than one CPU. If
you say N here, the kernel will run on single and
multiprocessor machines, but will use only one CPU of a
multiprocessor machine. If you say Y here, the kernel will run
on many, but not all, single processor machines. On a single
processor machine, the kernel will run faster if you say N
here.
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "8"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
Say N if you want to disable CPU hotplug.
choice
prompt "CPU Tuning"
default TUNE_GENERIC
config TUNE_GENERIC
bool "generic"
endchoice
# Common NUMA Features
config NUMA
bool "NUMA Memory Allocation and Scheduler Support"
depends on SMP && MMU
select GENERIC_ARCH_NUMA
select OF_NUMA
select ARCH_SUPPORTS_NUMA_BALANCING
help
Enable NUMA (Non-Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
local memory of the CPU and add some more NUMA awareness to the kernel.
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)"
range 1 10
default "2"
depends on NEED_MULTIPLE_NODES
help
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
config USE_PERCPU_NUMA_NODE_ID
def_bool y
depends on NUMA
config NEED_PER_CPU_EMBED_FIRST_CHUNK
def_bool y
depends on NUMA
config RISCV_ISA_C
bool "Emit compressed instructions when building Linux"
default y
help
Adds "C" to the ISA subsets that the toolchain is allowed to emit
when building Linux, which results in compressed instructions in the
Linux binary.
If you don't know what to do here, say Y.
menu "supported PMU type"
depends on PERF_EVENTS
config RISCV_BASE_PMU
bool "Base Performance Monitoring Unit"
def_bool y
help
A base PMU that serves as a reference implementation and has limited
feature of perf. It can run on any RISC-V machines so serves as the
fallback, but this option can also be disable to reduce kernel size.
endmenu
config FPU
bool "FPU support"
default y
help
Say N here if you want to disable all floating-point related procedure
in the kernel.
If you don't know what to do here, say Y.
endmenu
menu "Kernel features"
source "kernel/Kconfig.hz"
config RISCV_SBI_V01
bool "SBI v0.1 support"
default y
depends on RISCV_SBI
help
This config allows kernel to use SBI v0.1 APIs. This will be
deprecated in future once legacy M-mode software are no longer in use.
endmenu
menu "Boot options"
config CMDLINE
string "Built-in kernel command line"
help
For most platforms, the arguments for the kernel's command line
are provided at run-time, during boot. However, there are cases
where either no arguments are being provided or the provided
arguments are insufficient or even invalid.
When that occurs, it is possible to define a built-in command
line here and choose how the kernel should use it later on.
choice
prompt "Built-in command line usage" if CMDLINE != ""
default CMDLINE_FALLBACK
help
Choose how the kernel will handle the provided built-in command
line.
config CMDLINE_FALLBACK
bool "Use bootloader kernel arguments if available"
help
Use the built-in command line as fallback in case we get nothing
during boot. This is the default behaviour.
config CMDLINE_EXTEND
bool "Extend bootloader kernel arguments"
help
The command-line arguments provided during boot will be
appended to the built-in command line. This is useful in
cases where the provided arguments are insufficient and
you don't want to or cannot modify them.
config CMDLINE_FORCE
bool "Always use the default kernel command string"
help
Always use the built-in command line, even if we get one during
boot. This is useful in case you need to override the provided
command line on systems where you don't have or want control
over it.
endchoice
config EFI_STUB
bool
config EFI
bool "UEFI runtime support"
depends on OF
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
select EFI_STUB
select EFI_GENERIC_STUB
select EFI_RUNTIME_WRAPPERS
select RISCV_ISA_C
depends on MMU
default y
help
This option provides support for runtime services provided
by UEFI firmware (such as non-volatile variables, realtime
clock, and platform reset). A UEFI stub is also provided to
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
config CC_HAVE_STACKPROTECTOR_TLS
def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
config STACKPROTECTOR_PER_TASK
def_bool y
depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
endmenu
config BUILTIN_DTB
def_bool n
depends on OF
menu "Power management options"
source "kernel/power/Kconfig"
endmenu
source "drivers/firmware/Kconfig"