swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 4b119e21d0c66c22e8ca03df05d9de623d0eb50f authored by Linus Torvalds on 17 April 2008, 02:49:44 UTC
Linux 2.6.25
Linux 2.6.25
Tip revision: 4b119e2
Kconfig
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/SuperH Kernel Configuration"
config SUPERH
def_bool y
select EMBEDDED
select HAVE_IDE
select HAVE_OPROFILE
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
gaming console. The SuperH port has a home page at
<http://www.linux-sh.org/>.
config SUPERH32
def_bool !SUPERH64
config SUPERH64
def_bool y if CPU_SH5
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
bool
config GENERIC_BUG
def_bool y
depends on BUG && SUPERH32
config GENERIC_FIND_NEXT_BIT
def_bool y
config GENERIC_HWEIGHT
def_bool y
config GENERIC_HARDIRQS
def_bool y
config GENERIC_IRQ_PROBE
def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_IOMAP
bool
config GENERIC_TIME
def_bool n
config GENERIC_CLOCKEVENTS
def_bool n
config SYS_SUPPORTS_PM
bool
config SYS_SUPPORTS_APM_EMULATION
bool
select SYS_SUPPORTS_PM
config SYS_SUPPORTS_SMP
bool
config SYS_SUPPORTS_NUMA
bool
config SYS_SUPPORTS_PCI
bool
config STACKTRACE_SUPPORT
def_bool y
config LOCKDEP_SUPPORT
def_bool y
config ARCH_HAS_ILOG2_U32
def_bool n
config ARCH_HAS_ILOG2_U64
def_bool n
config ARCH_NO_VIRT_TO_BUS
def_bool y
config ARCH_SUPPORTS_AOUT
def_bool y
config IO_TRAPPED
bool
source "init/Kconfig"
menu "System type"
#
# Processor families
#
config CPU_SH2
bool
config CPU_SH2A
bool
select CPU_SH2
config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
select CPU_HAS_FPU if !CPU_SH4AL_DSP
config CPU_SH4A
bool
select CPU_SH4
config CPU_SH4AL_DSP
bool
select CPU_SH4A
select CPU_HAS_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
config CPU_SHX2
bool
config CPU_SHX3
bool
choice
prompt "Processor sub-type selection"
#
# Processor subtypes
#
# SH-2 Processor Support
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
# SH-2A Processor Support
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
# SH-3 Processor Support
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
config CPU_SUBTYPE_SH7706
bool "Support SH7706 processor"
select CPU_SH3
help
Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
config CPU_SUBTYPE_SH7707
bool "Support SH7707 processor"
select CPU_SH3
help
Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
config CPU_SUBTYPE_SH7708
bool "Support SH7708 processor"
select CPU_SH3
help
Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
if you have a 100 Mhz SH-3 HD6417708R CPU.
config CPU_SUBTYPE_SH7709
bool "Support SH7709 processor"
select CPU_SH3
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
config CPU_SUBTYPE_SH7710
bool "Support SH7710 processor"
select CPU_SH3
select CPU_HAS_DSP
help
Select SH7710 if you have a SH3-DSP SH7710 CPU.
config CPU_SUBTYPE_SH7712
bool "Support SH7712 processor"
select CPU_SH3
select CPU_HAS_DSP
help
Select SH7712 if you have a SH3-DSP SH7712 CPU.
config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
help
Select SH7721 if you have a SH3-DSP SH7721 CPU.
# SH-4 Processor Support
config CPU_SUBTYPE_SH7750
bool "Support SH7750 processor"
select CPU_SH4
help
Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
config CPU_SUBTYPE_SH7091
bool "Support SH7091 processor"
select CPU_SH4
help
Select SH7091 if you have an SH-4 based Sega device (such as
the Dreamcast, Naomi, and Naomi 2).
config CPU_SUBTYPE_SH7750R
bool "Support SH7750R processor"
select CPU_SH4
config CPU_SUBTYPE_SH7750S
bool "Support SH7750S processor"
select CPU_SH4
config CPU_SUBTYPE_SH7751
bool "Support SH7751 processor"
select CPU_SH4
help
Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
or if you have a HD6417751R CPU.
config CPU_SUBTYPE_SH7751R
bool "Support SH7751R processor"
select CPU_SH4
config CPU_SUBTYPE_SH7760
bool "Support SH7760 processor"
select CPU_SH4
config CPU_SUBTYPE_SH4_202
bool "Support SH4-202 processor"
select CPU_SH4
# SH-4A Processor Support
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
help
Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
config CPU_SUBTYPE_SH7770
bool "Support SH7770 processor"
select CPU_SH4A
config CPU_SUBTYPE_SH7780
bool "Support SH7780 processor"
select CPU_SH4A
config CPU_SUBTYPE_SH7785
bool "Support SH7785 processor"
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
select CPU_SH4A
select CPU_SHX3
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
# SH4AL-DSP Processor Support
config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
bool "Support SH5-101 processor"
select CPU_SH5
config CPU_SUBTYPE_SH5_103
bool "Support SH5-103 processor"
select CPU_SH5
endchoice
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
menu "Board support"
config SOLUTION_ENGINE
bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
config SH_7206_SOLUTION_ENGINE
bool "SolutionEngine7206"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7206
help
Select 7206 SolutionEngine if configuring for a Hitachi SH7206
evaluation board.
config SH_7619_SOLUTION_ENGINE
bool "SolutionEngine7619"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7619
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
depends on CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
depends on CPU_SUBTYPE_SH7751 && BROKEN
help
CTP/PCI-SH02 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select SYS_SUPPORTS_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
depends on CPU_SUBTYPE_SH7706
select CPU_HAS_IPR_IRQ
help
Select SHMIN if configuring for the SHMIN board.
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
endmenu
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
source "arch/sh/boards/renesas/sdk7780/Kconfig"
source "arch/sh/boards/magicpanelr2/Kconfig"
menu "Timer and clock configuration"
config SH_TMU
def_bool y
prompt "TMU timer support"
depends on CPU_SH3 || CPU_SH4
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
This enables the use of the TMU as the system timer.
config SH_CMT
def_bool y
prompt "CMT timer support"
depends on CPU_SH2
help
This enables the use of the CMT as the system timer.
config SH_MTU2
def_bool n
prompt "MTU2 timer support"
depends on CPU_SH2A
help
This enables the use of the MTU2 as the system timer.
config SH_TIMER_IRQ
int
default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
CPU_SUBTYPE_SH7763
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
default "142" if CPU_SUBTYPE_SH7203
default "16"
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
default "27000000" if CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
help
This option is used to specify the peripheral clock frequency.
This is necessary for determining the reference clock value on
platforms lacking an RTC.
config SH_CLK_MD
int "CPU Mode Pin Setting"
depends on CPU_SH2
default 6 if CPU_SUBTYPE_SH7206
default 5 if CPU_SUBTYPE_SH7619
default 0
help
MD2 - MD0 pin setting.
source "kernel/time/Kconfig"
endmenu
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
config SH_CPU_FREQ
tristate "SuperH CPU Frequency driver"
depends on CPU_FREQ
select CPU_FREQ_TABLE
help
This adds the cpufreq driver for SuperH. At present, only
the SH-4 is supported.
For details, take a look at <file:Documentation/cpu-freq>.
If unsure, say N.
endmenu
source "arch/sh/drivers/Kconfig"
endmenu
config ISA_DMA_API
def_bool y
depends on SH_MPC1211
menu "Kernel features"
source kernel/Kconfig.hz
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
initially work for you. It may help to enable device hotplugging
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
which are loaded in the main kernel with kexec-tools into
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
to a memory address not used by the main kernel using
MEMORY_START.
For more details see Documentation/kdump/kdump.txt
config SMP
bool "Symmetric multi-processing support"
depends on SYS_SUPPORTS_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below.
See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "4" if CPU_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 32 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
source "kernel/Kconfig.preempt"
config GUSA
def_bool y
depends on !SMP && SUPERH32
help
This enables support for gUSA (general UserSpace Atomicity).
This is the default implementation for both UP and non-ll/sc
CPUs, and is used by the libc, amongst others.
For additional information, design information can be found
in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
This should only be disabled for special cases where alternate
atomicity implementations exist.
config GUSA_RB
bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
help
Enabling this option will allow the kernel to implement some
atomic operations using a software implemention of load-locked/
store-conditional (LLSC). On machines which do not have hardware
LLSC, this should be more efficient than the other alternative of
disabling insterrupts around the atomic sequence.
endmenu
menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
default "0x00004000" if SH_MPC1211 || SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
help
This sets the default offset of zero page.
config BOOT_LINK_OFFSET
hex "Link address offset for booting"
default "0x00800000"
help
This option allows you to set the link address offset of the zImage.
This can be useful if you are on a board which has a small amount of
memory.
config UBC_WAKEUP
bool "Wakeup UBC on startup"
depends on CPU_SH4 && !CPU_SH4A
help
Selecting this option will wakeup the User Break Controller (UBC) on
startup. Although the UBC is left in an awake state when the processor
comes up, some boot loaders misbehave by putting the UBC to sleep in a
power saving state, which causes issues with things like ptrace().
If unsure, say N.
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Initial kernel command string"
depends on CMDLINE_BOOL
default "console=ttySC1,115200"
endmenu
menu "Bus options"
# Even on SuperH devices which don't have an ISA bus,
# this variable helps the PCMCIA modules handle
# IRQ requesting properly -- Greg Banks.
#
# Though we're generally not interested in it when
# we're not using PCMCIA, so we make it dependent on
# PCMCIA outright. -- PFM.
config ISA
def_bool y
depends on PCMCIA && HD6446X_SERIES
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config MCA
bool
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
config SBUS
bool
config SUPERHYWAY
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
config MAPLE
bool "Maple Bus support"
depends on SH_DREAMCAST
help
The Maple Bus is SEGA's serial communication bus for peripherals
on the Dreamcast. Without this bus support you won't be able to
get your Dreamcast keyboard etc to work, so most users
probably want to say 'Y' here, unless you are only using the
Dreamcast with a serial line terminal or a remote network
connection.
config CF_ENABLER
bool "Compact Flash Enabler support"
depends on SOLUTION_ENGINE || SH_SH03
---help---
Compact Flash is a small, removable mass storage device introduced
in 1994 originally as a PCMCIA device. If you say `Y' here, you
compile in support for Compact Flash devices directly connected to
a SuperH processor. A Compact Flash FAQ is available at
<http://www.compactflash.org/faqs/faq.htm>.
If your board has "Directly Connected" CompactFlash at area 5 or 6,
you may want to enable this option. Then, you can use CF as
primary IDE drive (only tested for SanDisk).
If in doubt, select 'N'.
choice
prompt "Compact Flash Connection Area"
depends on CF_ENABLER
default CF_AREA6
config CF_AREA5
bool "Area5"
help
If your board has "Directly Connected" CompactFlash, You should
select the area where your CF is connected to.
- "Area5" if CompactFlash is connected to Area 5 (0x14000000)
- "Area6" if it is connected to Area 6 (0x18000000)
"Area6" will work for most boards.
config CF_AREA6
bool "Area6"
endchoice
config CF_BASE_ADDR
hex
depends on CF_ENABLER
default "0xb8000000" if CF_AREA6
default "0xb4000000" if CF_AREA5
source "arch/sh/drivers/pci/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
menu "Power management options (EXPERIMENTAL)"
depends on EXPERIMENTAL && SYS_SUPPORTS_PM
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on !SMP
source kernel/power/Kconfig
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/sh/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"