swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 2c53b436a30867eb6b47dd7bab23ba638d1fb0d2 authored by Linus Torvalds on 13 June 2011, 22:29:59 UTC
Linux 3.0-rc3
Linux 3.0-rc3
Tip revision: 2c53b43
acpi_ipmi.c
/*
* acpi_ipmi.c - ACPI IPMI opregion
*
* Copyright (C) 2010 Intel Corporation
* Copyright (C) 2010 Zhao Yakui <yakui.zhao@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/ipmi.h>
#include <linux/device.h>
#include <linux/pnp.h>
MODULE_AUTHOR("Zhao Yakui");
MODULE_DESCRIPTION("ACPI IPMI Opregion driver");
MODULE_LICENSE("GPL");
#define IPMI_FLAGS_HANDLER_INSTALL 0
#define ACPI_IPMI_OK 0
#define ACPI_IPMI_TIMEOUT 0x10
#define ACPI_IPMI_UNKNOWN 0x07
/* the IPMI timeout is 5s */
#define IPMI_TIMEOUT (5 * HZ)
struct acpi_ipmi_device {
/* the device list attached to driver_data.ipmi_devices */
struct list_head head;
/* the IPMI request message list */
struct list_head tx_msg_list;
struct mutex tx_msg_lock;
acpi_handle handle;
struct pnp_dev *pnp_dev;
ipmi_user_t user_interface;
int ipmi_ifnum; /* IPMI interface number */
long curr_msgid;
unsigned long flags;
struct ipmi_smi_info smi_data;
};
struct ipmi_driver_data {
struct list_head ipmi_devices;
struct ipmi_smi_watcher bmc_events;
struct ipmi_user_hndl ipmi_hndlrs;
struct mutex ipmi_lock;
};
struct acpi_ipmi_msg {
struct list_head head;
/*
* General speaking the addr type should be SI_ADDR_TYPE. And
* the addr channel should be BMC.
* In fact it can also be IPMB type. But we will have to
* parse it from the Netfn command buffer. It is so complex
* that it is skipped.
*/
struct ipmi_addr addr;
long tx_msgid;
/* it is used to track whether the IPMI message is finished */
struct completion tx_complete;
struct kernel_ipmi_msg tx_message;
int msg_done;
/* tx data . And copy it from ACPI object buffer */
u8 tx_data[64];
int tx_len;
u8 rx_data[64];
int rx_len;
struct acpi_ipmi_device *device;
};
/* IPMI request/response buffer per ACPI 4.0, sec 5.5.2.4.3.2 */
struct acpi_ipmi_buffer {
u8 status;
u8 length;
u8 data[64];
};
static void ipmi_register_bmc(int iface, struct device *dev);
static void ipmi_bmc_gone(int iface);
static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device);
static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device);
static struct ipmi_driver_data driver_data = {
.ipmi_devices = LIST_HEAD_INIT(driver_data.ipmi_devices),
.bmc_events = {
.owner = THIS_MODULE,
.new_smi = ipmi_register_bmc,
.smi_gone = ipmi_bmc_gone,
},
.ipmi_hndlrs = {
.ipmi_recv_hndl = ipmi_msg_handler,
},
};
static struct acpi_ipmi_msg *acpi_alloc_ipmi_msg(struct acpi_ipmi_device *ipmi)
{
struct acpi_ipmi_msg *ipmi_msg;
struct pnp_dev *pnp_dev = ipmi->pnp_dev;
ipmi_msg = kzalloc(sizeof(struct acpi_ipmi_msg), GFP_KERNEL);
if (!ipmi_msg) {
dev_warn(&pnp_dev->dev, "Can't allocate memory for ipmi_msg\n");
return NULL;
}
init_completion(&ipmi_msg->tx_complete);
INIT_LIST_HEAD(&ipmi_msg->head);
ipmi_msg->device = ipmi;
return ipmi_msg;
}
#define IPMI_OP_RGN_NETFN(offset) ((offset >> 8) & 0xff)
#define IPMI_OP_RGN_CMD(offset) (offset & 0xff)
static void acpi_format_ipmi_msg(struct acpi_ipmi_msg *tx_msg,
acpi_physical_address address,
acpi_integer *value)
{
struct kernel_ipmi_msg *msg;
struct acpi_ipmi_buffer *buffer;
struct acpi_ipmi_device *device;
msg = &tx_msg->tx_message;
/*
* IPMI network function and command are encoded in the address
* within the IPMI OpRegion; see ACPI 4.0, sec 5.5.2.4.3.
*/
msg->netfn = IPMI_OP_RGN_NETFN(address);
msg->cmd = IPMI_OP_RGN_CMD(address);
msg->data = tx_msg->tx_data;
/*
* value is the parameter passed by the IPMI opregion space handler.
* It points to the IPMI request message buffer
*/
buffer = (struct acpi_ipmi_buffer *)value;
/* copy the tx message data */
msg->data_len = buffer->length;
memcpy(tx_msg->tx_data, buffer->data, msg->data_len);
/*
* now the default type is SYSTEM_INTERFACE and channel type is BMC.
* If the netfn is APP_REQUEST and the cmd is SEND_MESSAGE,
* the addr type should be changed to IPMB. Then we will have to parse
* the IPMI request message buffer to get the IPMB address.
* If so, please fix me.
*/
tx_msg->addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
tx_msg->addr.channel = IPMI_BMC_CHANNEL;
tx_msg->addr.data[0] = 0;
/* Get the msgid */
device = tx_msg->device;
mutex_lock(&device->tx_msg_lock);
device->curr_msgid++;
tx_msg->tx_msgid = device->curr_msgid;
mutex_unlock(&device->tx_msg_lock);
}
static void acpi_format_ipmi_response(struct acpi_ipmi_msg *msg,
acpi_integer *value, int rem_time)
{
struct acpi_ipmi_buffer *buffer;
/*
* value is also used as output parameter. It represents the response
* IPMI message returned by IPMI command.
*/
buffer = (struct acpi_ipmi_buffer *)value;
if (!rem_time && !msg->msg_done) {
buffer->status = ACPI_IPMI_TIMEOUT;
return;
}
/*
* If the flag of msg_done is not set or the recv length is zero, it
* means that the IPMI command is not executed correctly.
* The status code will be ACPI_IPMI_UNKNOWN.
*/
if (!msg->msg_done || !msg->rx_len) {
buffer->status = ACPI_IPMI_UNKNOWN;
return;
}
/*
* If the IPMI response message is obtained correctly, the status code
* will be ACPI_IPMI_OK
*/
buffer->status = ACPI_IPMI_OK;
buffer->length = msg->rx_len;
memcpy(buffer->data, msg->rx_data, msg->rx_len);
}
static void ipmi_flush_tx_msg(struct acpi_ipmi_device *ipmi)
{
struct acpi_ipmi_msg *tx_msg, *temp;
int count = HZ / 10;
struct pnp_dev *pnp_dev = ipmi->pnp_dev;
list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) {
/* wake up the sleep thread on the Tx msg */
complete(&tx_msg->tx_complete);
}
/* wait for about 100ms to flush the tx message list */
while (count--) {
if (list_empty(&ipmi->tx_msg_list))
break;
schedule_timeout(1);
}
if (!list_empty(&ipmi->tx_msg_list))
dev_warn(&pnp_dev->dev, "tx msg list is not NULL\n");
}
static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
{
struct acpi_ipmi_device *ipmi_device = user_msg_data;
int msg_found = 0;
struct acpi_ipmi_msg *tx_msg;
struct pnp_dev *pnp_dev = ipmi_device->pnp_dev;
if (msg->user != ipmi_device->user_interface) {
dev_warn(&pnp_dev->dev, "Unexpected response is returned. "
"returned user %p, expected user %p\n",
msg->user, ipmi_device->user_interface);
ipmi_free_recv_msg(msg);
return;
}
mutex_lock(&ipmi_device->tx_msg_lock);
list_for_each_entry(tx_msg, &ipmi_device->tx_msg_list, head) {
if (msg->msgid == tx_msg->tx_msgid) {
msg_found = 1;
break;
}
}
mutex_unlock(&ipmi_device->tx_msg_lock);
if (!msg_found) {
dev_warn(&pnp_dev->dev, "Unexpected response (msg id %ld) is "
"returned.\n", msg->msgid);
ipmi_free_recv_msg(msg);
return;
}
if (msg->msg.data_len) {
/* copy the response data to Rx_data buffer */
memcpy(tx_msg->rx_data, msg->msg_data, msg->msg.data_len);
tx_msg->rx_len = msg->msg.data_len;
tx_msg->msg_done = 1;
}
complete(&tx_msg->tx_complete);
ipmi_free_recv_msg(msg);
};
static void ipmi_register_bmc(int iface, struct device *dev)
{
struct acpi_ipmi_device *ipmi_device, *temp;
struct pnp_dev *pnp_dev;
ipmi_user_t user;
int err;
struct ipmi_smi_info smi_data;
acpi_handle handle;
err = ipmi_get_smi_info(iface, &smi_data);
if (err)
return;
if (smi_data.addr_src != SI_ACPI) {
put_device(smi_data.dev);
return;
}
handle = smi_data.addr_info.acpi_info.acpi_handle;
mutex_lock(&driver_data.ipmi_lock);
list_for_each_entry(temp, &driver_data.ipmi_devices, head) {
/*
* if the corresponding ACPI handle is already added
* to the device list, don't add it again.
*/
if (temp->handle == handle)
goto out;
}
ipmi_device = kzalloc(sizeof(*ipmi_device), GFP_KERNEL);
if (!ipmi_device)
goto out;
pnp_dev = to_pnp_dev(smi_data.dev);
ipmi_device->handle = handle;
ipmi_device->pnp_dev = pnp_dev;
err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs,
ipmi_device, &user);
if (err) {
dev_warn(&pnp_dev->dev, "Can't create IPMI user interface\n");
kfree(ipmi_device);
goto out;
}
acpi_add_ipmi_device(ipmi_device);
ipmi_device->user_interface = user;
ipmi_device->ipmi_ifnum = iface;
mutex_unlock(&driver_data.ipmi_lock);
memcpy(&ipmi_device->smi_data, &smi_data, sizeof(struct ipmi_smi_info));
return;
out:
mutex_unlock(&driver_data.ipmi_lock);
put_device(smi_data.dev);
return;
}
static void ipmi_bmc_gone(int iface)
{
struct acpi_ipmi_device *ipmi_device, *temp;
mutex_lock(&driver_data.ipmi_lock);
list_for_each_entry_safe(ipmi_device, temp,
&driver_data.ipmi_devices, head) {
if (ipmi_device->ipmi_ifnum != iface)
continue;
acpi_remove_ipmi_device(ipmi_device);
put_device(ipmi_device->smi_data.dev);
kfree(ipmi_device);
break;
}
mutex_unlock(&driver_data.ipmi_lock);
}
/* --------------------------------------------------------------------------
* Address Space Management
* -------------------------------------------------------------------------- */
/*
* This is the IPMI opregion space handler.
* @function: indicates the read/write. In fact as the IPMI message is driven
* by command, only write is meaningful.
* @address: This contains the netfn/command of IPMI request message.
* @bits : not used.
* @value : it is an in/out parameter. It points to the IPMI message buffer.
* Before the IPMI message is sent, it represents the actual request
* IPMI message. After the IPMI message is finished, it represents
* the response IPMI message returned by IPMI command.
* @handler_context: IPMI device context.
*/
static acpi_status
acpi_ipmi_space_handler(u32 function, acpi_physical_address address,
u32 bits, acpi_integer *value,
void *handler_context, void *region_context)
{
struct acpi_ipmi_msg *tx_msg;
struct acpi_ipmi_device *ipmi_device = handler_context;
int err, rem_time;
acpi_status status;
/*
* IPMI opregion message.
* IPMI message is firstly written to the BMC and system software
* can get the respsonse. So it is unmeaningful for the read access
* of IPMI opregion.
*/
if ((function & ACPI_IO_MASK) == ACPI_READ)
return AE_TYPE;
if (!ipmi_device->user_interface)
return AE_NOT_EXIST;
tx_msg = acpi_alloc_ipmi_msg(ipmi_device);
if (!tx_msg)
return AE_NO_MEMORY;
acpi_format_ipmi_msg(tx_msg, address, value);
mutex_lock(&ipmi_device->tx_msg_lock);
list_add_tail(&tx_msg->head, &ipmi_device->tx_msg_list);
mutex_unlock(&ipmi_device->tx_msg_lock);
err = ipmi_request_settime(ipmi_device->user_interface,
&tx_msg->addr,
tx_msg->tx_msgid,
&tx_msg->tx_message,
NULL, 0, 0, 0);
if (err) {
status = AE_ERROR;
goto end_label;
}
rem_time = wait_for_completion_timeout(&tx_msg->tx_complete,
IPMI_TIMEOUT);
acpi_format_ipmi_response(tx_msg, value, rem_time);
status = AE_OK;
end_label:
mutex_lock(&ipmi_device->tx_msg_lock);
list_del(&tx_msg->head);
mutex_unlock(&ipmi_device->tx_msg_lock);
kfree(tx_msg);
return status;
}
static void ipmi_remove_space_handler(struct acpi_ipmi_device *ipmi)
{
if (!test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags))
return;
acpi_remove_address_space_handler(ipmi->handle,
ACPI_ADR_SPACE_IPMI, &acpi_ipmi_space_handler);
clear_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags);
}
static int ipmi_install_space_handler(struct acpi_ipmi_device *ipmi)
{
acpi_status status;
if (test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags))
return 0;
status = acpi_install_address_space_handler(ipmi->handle,
ACPI_ADR_SPACE_IPMI,
&acpi_ipmi_space_handler,
NULL, ipmi);
if (ACPI_FAILURE(status)) {
struct pnp_dev *pnp_dev = ipmi->pnp_dev;
dev_warn(&pnp_dev->dev, "Can't register IPMI opregion space "
"handle\n");
return -EINVAL;
}
set_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags);
return 0;
}
static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device)
{
INIT_LIST_HEAD(&ipmi_device->head);
mutex_init(&ipmi_device->tx_msg_lock);
INIT_LIST_HEAD(&ipmi_device->tx_msg_list);
ipmi_install_space_handler(ipmi_device);
list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices);
}
static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device)
{
/*
* If the IPMI user interface is created, it should be
* destroyed.
*/
if (ipmi_device->user_interface) {
ipmi_destroy_user(ipmi_device->user_interface);
ipmi_device->user_interface = NULL;
}
/* flush the Tx_msg list */
if (!list_empty(&ipmi_device->tx_msg_list))
ipmi_flush_tx_msg(ipmi_device);
list_del(&ipmi_device->head);
ipmi_remove_space_handler(ipmi_device);
}
static int __init acpi_ipmi_init(void)
{
int result = 0;
if (acpi_disabled)
return result;
mutex_init(&driver_data.ipmi_lock);
result = ipmi_smi_watcher_register(&driver_data.bmc_events);
return result;
}
static void __exit acpi_ipmi_exit(void)
{
struct acpi_ipmi_device *ipmi_device, *temp;
if (acpi_disabled)
return;
ipmi_smi_watcher_unregister(&driver_data.bmc_events);
/*
* When one smi_watcher is unregistered, it is only deleted
* from the smi_watcher list. But the smi_gone callback function
* is not called. So explicitly uninstall the ACPI IPMI oregion
* handler and free it.
*/
mutex_lock(&driver_data.ipmi_lock);
list_for_each_entry_safe(ipmi_device, temp,
&driver_data.ipmi_devices, head) {
acpi_remove_ipmi_device(ipmi_device);
put_device(ipmi_device->smi_data.dev);
kfree(ipmi_device);
}
mutex_unlock(&driver_data.ipmi_lock);
}
module_init(acpi_ipmi_init);
module_exit(acpi_ipmi_exit);