swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: b2776bf7149bddd1f4161f14f79520f17fc1d71d authored by Linus Torvalds on 07 December 2014, 22:21:05 UTC
Linux 3.18
Linux 3.18
Tip revision: b2776bf
ahci_da850.c
/*
* DaVinci DA850 AHCI SATA platform driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
/* SATA PHY Control Register offset from AHCI base */
#define SATA_P0PHYCR_REG 0x178
#define SATA_PHY_MPY(x) ((x) << 0)
#define SATA_PHY_LOS(x) ((x) << 6)
#define SATA_PHY_RXCDR(x) ((x) << 10)
#define SATA_PHY_RXEQ(x) ((x) << 13)
#define SATA_PHY_TXSWING(x) ((x) << 19)
#define SATA_PHY_ENPLL(x) ((x) << 31)
/*
* The multiplier needed for 1.5GHz PLL output.
*
* NOTE: This is currently hardcoded to be suitable for 100MHz crystal
* frequency (which is used by DA850 EVM board) and may need to be changed
* if you would like to use this driver on some other board.
*/
#define DA850_SATA_CLK_MULTIPLIER 7
static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
void __iomem *ahci_base)
{
unsigned int val;
/* Enable SATA clock receiver */
val = readl(pwrdn_reg);
val &= ~BIT(0);
writel(val, pwrdn_reg);
val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) |
SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) |
SATA_PHY_ENPLL(1);
writel(val, ahci_base + SATA_P0PHYCR_REG);
}
static const struct ata_port_info ahci_da850_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
};
static int ahci_da850_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct resource *res;
void __iomem *pwrdn_reg;
int rc;
hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res)
goto disable_resources;
pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res));
if (!pwrdn_reg)
goto disable_resources;
da850_sata_init(dev, pwrdn_reg, hpriv->mmio);
rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info);
if (rc)
goto disable_resources;
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
ahci_platform_resume);
static struct platform_driver ahci_da850_driver = {
.probe = ahci_da850_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = "ahci_da850",
.owner = THIS_MODULE,
.pm = &ahci_da850_pm_ops,
},
};
module_platform_driver(ahci_da850_driver);
MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
MODULE_LICENSE("GPL");