swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 4b972a01a7da614b4796475f933094751a295a2f authored by Linus Torvalds on 22 June 2019, 23:01:36 UTC
Linux 5.2-rc6
Linux 5.2-rc6
Tip revision: 4b972a0
s3c2412-cpufreq.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2412 CPU Frequency scalling
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
#include <mach/s3c2412.h>
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
static struct clk *hclk;
static struct clk *armclk;
/* HDIV: 1, 2, 3, 4, 6, 8 */
static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
{
unsigned int hdiv, pdiv, armdiv, dvs;
unsigned long hclk, fclk, armclk, armdiv_clk;
unsigned long hclk_max;
fclk = cfg->freq.fclk;
armclk = cfg->freq.armclk;
hclk_max = cfg->max.hclk;
/* We can't run hclk above armclk as at the best we have to
* have armclk and hclk in dvs mode. */
if (hclk_max > armclk)
hclk_max = armclk;
s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
__func__, fclk, armclk, hclk_max);
s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
__func__, cfg->freq.fclk, cfg->freq.armclk,
cfg->freq.hclk, cfg->freq.pclk);
armdiv = fclk / armclk;
if (armdiv < 1)
armdiv = 1;
if (armdiv > 2)
armdiv = 2;
cfg->divs.arm_divisor = armdiv;
armdiv_clk = fclk / armdiv;
hdiv = armdiv_clk / hclk_max;
if (hdiv < 1)
hdiv = 1;
cfg->freq.hclk = hclk = armdiv_clk / hdiv;
/* set dvs depending on whether we reached armclk or not. */
cfg->divs.dvs = dvs = armclk < armdiv_clk;
/* update the actual armclk we achieved. */
cfg->freq.armclk = dvs ? hclk : armdiv_clk;
s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
__func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
if (hdiv > 4)
goto invalid;
pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
if ((hclk / pdiv) > cfg->max.pclk)
pdiv++;
cfg->freq.pclk = hclk / pdiv;
s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
if (pdiv > 2)
goto invalid;
pdiv *= hdiv;
/* store the result, and then return */
cfg->divs.h_divisor = hdiv * armdiv;
cfg->divs.p_divisor = pdiv * armdiv;
return 0;
invalid:
return -EINVAL;
}
static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
{
unsigned long clkdiv;
unsigned long olddiv;
olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
/* clear off current clock info */
clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
if (cfg->divs.arm_divisor == 2)
clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
clkdiv |= S3C2412_CLKDIVN_PDIVN;
s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
__raw_writel(clkdiv, S3C2410_CLKDIVN);
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
{
struct s3c_cpufreq_board *board = cfg->board;
unsigned long refresh;
s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
board->refresh, cfg->freq.hclk);
/* Reduce both the refresh time (in ns) and the frequency (in MHz)
* by 10 each to ensure that we do not overflow 32 bit numbers. This
* should work for HCLK up to 133MHz and refresh period up to 30usec.
*/
refresh = (board->refresh / 10);
refresh *= (cfg->freq.hclk / 100);
refresh /= (1 * 1000 * 1000); /* 10^6 */
s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
__raw_writel(refresh, S3C2412_REFRESH);
}
/* set the default cpu frequency information, based on an 200MHz part
* as we have no other way of detecting the speed rating in software.
*/
static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
.max = {
.fclk = 200000000,
.hclk = 100000000,
.pclk = 50000000,
},
.latency = 5000000, /* 5ms */
.locktime_m = 150,
.locktime_u = 150,
.locktime_bits = 16,
.name = "s3c2412",
.set_refresh = s3c2412_cpufreq_setrefresh,
.set_divs = s3c2412_cpufreq_setdivs,
.calc_divs = s3c2412_cpufreq_calcdivs,
.calc_iotiming = s3c2412_iotiming_calc,
.set_iotiming = s3c2412_iotiming_set,
.get_iotiming = s3c2412_iotiming_get,
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
static int s3c2412_cpufreq_add(struct device *dev,
struct subsys_interface *sif)
{
unsigned long fclk_rate;
hclk = clk_get(NULL, "hclk");
if (IS_ERR(hclk)) {
pr_err("cannot find hclk clock\n");
return -ENOENT;
}
fclk = clk_get(NULL, "fclk");
if (IS_ERR(fclk)) {
pr_err("cannot find fclk clock\n");
goto err_fclk;
}
fclk_rate = clk_get_rate(fclk);
if (fclk_rate > 200000000) {
pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
fclk_rate / 1000000);
s3c2412_cpufreq_info.max.fclk = 266000000;
s3c2412_cpufreq_info.max.hclk = 133000000;
s3c2412_cpufreq_info.max.pclk = 66000000;
}
armclk = clk_get(NULL, "armclk");
if (IS_ERR(armclk)) {
pr_err("cannot find arm clock\n");
goto err_armclk;
}
xtal = clk_get(NULL, "xtal");
if (IS_ERR(xtal)) {
pr_err("cannot find xtal clock\n");
goto err_xtal;
}
return s3c_cpufreq_register(&s3c2412_cpufreq_info);
err_xtal:
clk_put(armclk);
err_armclk:
clk_put(fclk);
err_fclk:
clk_put(hclk);
return -ENOENT;
}
static struct subsys_interface s3c2412_cpufreq_interface = {
.name = "s3c2412_cpufreq",
.subsys = &s3c2412_subsys,
.add_dev = s3c2412_cpufreq_add,
};
static int s3c2412_cpufreq_init(void)
{
return subsys_interface_register(&s3c2412_cpufreq_interface);
}
arch_initcall(s3c2412_cpufreq_init);