swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 219d54332a09e8d8741c1e1982f5eae56099de85 authored by Linus Torvalds on 25 November 2019, 00:32:01 UTC
Linux 5.4
Linux 5.4
Tip revision: 219d543
s3c64xx-cpufreq.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2009 Wolfson Microelectronics plc
*
* S3C64xx CPUfreq Support
*/
#define pr_fmt(fmt) "cpufreq: " fmt
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
static struct regulator *vddarm;
static unsigned long regulator_latency;
#ifdef CONFIG_CPU_S3C6410
struct s3c64xx_dvfs {
unsigned int vddarm_min;
unsigned int vddarm_max;
};
static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
[0] = { 1000000, 1150000 },
[1] = { 1050000, 1150000 },
[2] = { 1100000, 1150000 },
[3] = { 1200000, 1350000 },
[4] = { 1300000, 1350000 },
};
static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
{ 0, 0, 66000 },
{ 0, 0, 100000 },
{ 0, 0, 133000 },
{ 0, 1, 200000 },
{ 0, 1, 222000 },
{ 0, 1, 266000 },
{ 0, 2, 333000 },
{ 0, 2, 400000 },
{ 0, 2, 532000 },
{ 0, 2, 533000 },
{ 0, 3, 667000 },
{ 0, 4, 800000 },
{ 0, 0, CPUFREQ_TABLE_END },
};
#endif
static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
struct s3c64xx_dvfs *dvfs;
unsigned int old_freq, new_freq;
int ret;
old_freq = clk_get_rate(policy->clk) / 1000;
new_freq = s3c64xx_freq_table[index].frequency;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
#ifdef CONFIG_REGULATOR
if (vddarm && new_freq > old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
new_freq, ret);
return ret;
}
}
#endif
ret = clk_set_rate(policy->clk, new_freq * 1000);
if (ret < 0) {
pr_err("Failed to set rate %dkHz: %d\n",
new_freq, ret);
return ret;
}
#ifdef CONFIG_REGULATOR
if (vddarm && new_freq < old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
new_freq, ret);
if (clk_set_rate(policy->clk, old_freq * 1000) < 0)
pr_err("Failed to restore original clock rate\n");
return ret;
}
}
#endif
pr_debug("Set actual frequency %lukHz\n",
clk_get_rate(policy->clk) / 1000);
return 0;
}
#ifdef CONFIG_REGULATOR
static void s3c64xx_cpufreq_config_regulator(void)
{
int count, v, i, found;
struct cpufreq_frequency_table *freq;
struct s3c64xx_dvfs *dvfs;
count = regulator_count_voltages(vddarm);
if (count < 0) {
pr_err("Unable to check supported voltages\n");
}
if (!count)
goto out;
cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
dvfs = &s3c64xx_dvfs_table[freq->driver_data];
found = 0;
for (i = 0; i < count; i++) {
v = regulator_list_voltage(vddarm, i);
if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
found = 1;
}
if (!found) {
pr_debug("%dkHz unsupported by regulator\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
}
out:
/* Guess based on having to do an I2C/SPI write; in future we
* will be able to query the regulator performance here. */
regulator_latency = 1 * 1000 * 1000;
}
#endif
static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq;
if (policy->cpu != 0)
return -EINVAL;
if (s3c64xx_freq_table == NULL) {
pr_err("No frequency information for this CPU\n");
return -ENODEV;
}
policy->clk = clk_get(NULL, "armclk");
if (IS_ERR(policy->clk)) {
pr_err("Unable to obtain ARMCLK: %ld\n",
PTR_ERR(policy->clk));
return PTR_ERR(policy->clk);
}
#ifdef CONFIG_REGULATOR
vddarm = regulator_get(NULL, "vddarm");
if (IS_ERR(vddarm)) {
pr_err("Failed to obtain VDDARM: %ld\n", PTR_ERR(vddarm));
pr_err("Only frequency scaling available\n");
vddarm = NULL;
} else {
s3c64xx_cpufreq_config_regulator();
}
#endif
cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
unsigned long r;
/* Check for frequencies we can generate */
r = clk_round_rate(policy->clk, freq->frequency * 1000);
r /= 1000;
if (r != freq->frequency) {
pr_debug("%dkHz unsupported by clock\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
/* If we have no regulator then assume startup
* frequency is the maximum we can support. */
if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
/* Datasheet says PLL stabalisation time (if we were to use
* the PLLs, which we don't currently) is ~300us worst case,
* but add some fudge.
*/
cpufreq_generic_init(policy, s3c64xx_freq_table,
(500 * 1000) + regulator_latency);
return 0;
}
static struct cpufreq_driver s3c64xx_cpufreq_driver = {
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = s3c64xx_cpufreq_set_target,
.get = cpufreq_generic_get,
.init = s3c64xx_cpufreq_driver_init,
.name = "s3c",
};
static int __init s3c64xx_cpufreq_init(void)
{
return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
}
module_init(s3c64xx_cpufreq_init);