swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 19f949f52599ba7c3f67a5897ac6be14bfcb1200 authored by Linus Torvalds on 18 February 2013, 23:58:34 UTC
Linux 3.8
Linux 3.8
Tip revision: 19f949f
amd_iommu_types.h
/*
* Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <joerg.roedel@amd.com>
* Leo Duran <leo.duran@amd.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_X86_AMD_IOMMU_TYPES_H
#define _ASM_X86_AMD_IOMMU_TYPES_H
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/spinlock.h>
/*
* Maximum number of IOMMUs supported
*/
#define MAX_IOMMUS 32
/*
* some size calculation constants
*/
#define DEV_TABLE_ENTRY_SIZE 32
#define ALIAS_TABLE_ENTRY_SIZE 2
#define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *))
/* Length of the MMIO region for the AMD IOMMU */
#define MMIO_REGION_LENGTH 0x4000
/* Capability offsets used by the driver */
#define MMIO_CAP_HDR_OFFSET 0x00
#define MMIO_RANGE_OFFSET 0x0c
#define MMIO_MISC_OFFSET 0x10
/* Masks, shifts and macros to parse the device range capability */
#define MMIO_RANGE_LD_MASK 0xff000000
#define MMIO_RANGE_FD_MASK 0x00ff0000
#define MMIO_RANGE_BUS_MASK 0x0000ff00
#define MMIO_RANGE_LD_SHIFT 24
#define MMIO_RANGE_FD_SHIFT 16
#define MMIO_RANGE_BUS_SHIFT 8
#define MMIO_GET_LD(x) (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
#define MMIO_GET_FD(x) (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
#define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
#define MMIO_MSI_NUM(x) ((x) & 0x1f)
/* Flag masks for the AMD IOMMU exclusion range */
#define MMIO_EXCL_ENABLE_MASK 0x01ULL
#define MMIO_EXCL_ALLOW_MASK 0x02ULL
/* Used offsets into the MMIO space */
#define MMIO_DEV_TABLE_OFFSET 0x0000
#define MMIO_CMD_BUF_OFFSET 0x0008
#define MMIO_EVT_BUF_OFFSET 0x0010
#define MMIO_CONTROL_OFFSET 0x0018
#define MMIO_EXCL_BASE_OFFSET 0x0020
#define MMIO_EXCL_LIMIT_OFFSET 0x0028
#define MMIO_EXT_FEATURES 0x0030
#define MMIO_PPR_LOG_OFFSET 0x0038
#define MMIO_CMD_HEAD_OFFSET 0x2000
#define MMIO_CMD_TAIL_OFFSET 0x2008
#define MMIO_EVT_HEAD_OFFSET 0x2010
#define MMIO_EVT_TAIL_OFFSET 0x2018
#define MMIO_STATUS_OFFSET 0x2020
#define MMIO_PPR_HEAD_OFFSET 0x2030
#define MMIO_PPR_TAIL_OFFSET 0x2038
/* Extended Feature Bits */
#define FEATURE_PREFETCH (1ULL<<0)
#define FEATURE_PPR (1ULL<<1)
#define FEATURE_X2APIC (1ULL<<2)
#define FEATURE_NX (1ULL<<3)
#define FEATURE_GT (1ULL<<4)
#define FEATURE_IA (1ULL<<6)
#define FEATURE_GA (1ULL<<7)
#define FEATURE_HE (1ULL<<8)
#define FEATURE_PC (1ULL<<9)
#define FEATURE_PASID_SHIFT 32
#define FEATURE_PASID_MASK (0x1fULL << FEATURE_PASID_SHIFT)
#define FEATURE_GLXVAL_SHIFT 14
#define FEATURE_GLXVAL_MASK (0x03ULL << FEATURE_GLXVAL_SHIFT)
#define PASID_MASK 0x000fffff
/* MMIO status bits */
#define MMIO_STATUS_COM_WAIT_INT_MASK (1 << 2)
#define MMIO_STATUS_PPR_INT_MASK (1 << 6)
/* event logging constants */
#define EVENT_ENTRY_SIZE 0x10
#define EVENT_TYPE_SHIFT 28
#define EVENT_TYPE_MASK 0xf
#define EVENT_TYPE_ILL_DEV 0x1
#define EVENT_TYPE_IO_FAULT 0x2
#define EVENT_TYPE_DEV_TAB_ERR 0x3
#define EVENT_TYPE_PAGE_TAB_ERR 0x4
#define EVENT_TYPE_ILL_CMD 0x5
#define EVENT_TYPE_CMD_HARD_ERR 0x6
#define EVENT_TYPE_IOTLB_INV_TO 0x7
#define EVENT_TYPE_INV_DEV_REQ 0x8
#define EVENT_DEVID_MASK 0xffff
#define EVENT_DEVID_SHIFT 0
#define EVENT_DOMID_MASK 0xffff
#define EVENT_DOMID_SHIFT 0
#define EVENT_FLAGS_MASK 0xfff
#define EVENT_FLAGS_SHIFT 0x10
/* feature control bits */
#define CONTROL_IOMMU_EN 0x00ULL
#define CONTROL_HT_TUN_EN 0x01ULL
#define CONTROL_EVT_LOG_EN 0x02ULL
#define CONTROL_EVT_INT_EN 0x03ULL
#define CONTROL_COMWAIT_EN 0x04ULL
#define CONTROL_INV_TIMEOUT 0x05ULL
#define CONTROL_PASSPW_EN 0x08ULL
#define CONTROL_RESPASSPW_EN 0x09ULL
#define CONTROL_COHERENT_EN 0x0aULL
#define CONTROL_ISOC_EN 0x0bULL
#define CONTROL_CMDBUF_EN 0x0cULL
#define CONTROL_PPFLOG_EN 0x0dULL
#define CONTROL_PPFINT_EN 0x0eULL
#define CONTROL_PPR_EN 0x0fULL
#define CONTROL_GT_EN 0x10ULL
#define CTRL_INV_TO_MASK (7 << CONTROL_INV_TIMEOUT)
#define CTRL_INV_TO_NONE 0
#define CTRL_INV_TO_1MS 1
#define CTRL_INV_TO_10MS 2
#define CTRL_INV_TO_100MS 3
#define CTRL_INV_TO_1S 4
#define CTRL_INV_TO_10S 5
#define CTRL_INV_TO_100S 6
/* command specific defines */
#define CMD_COMPL_WAIT 0x01
#define CMD_INV_DEV_ENTRY 0x02
#define CMD_INV_IOMMU_PAGES 0x03
#define CMD_INV_IOTLB_PAGES 0x04
#define CMD_INV_IRT 0x05
#define CMD_COMPLETE_PPR 0x07
#define CMD_INV_ALL 0x08
#define CMD_COMPL_WAIT_STORE_MASK 0x01
#define CMD_COMPL_WAIT_INT_MASK 0x02
#define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01
#define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02
#define CMD_INV_IOMMU_PAGES_GN_MASK 0x04
#define PPR_STATUS_MASK 0xf
#define PPR_STATUS_SHIFT 12
#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS 0x7fffffffffffffffULL
/* macros and definitions for device table entries */
#define DEV_ENTRY_VALID 0x00
#define DEV_ENTRY_TRANSLATION 0x01
#define DEV_ENTRY_IR 0x3d
#define DEV_ENTRY_IW 0x3e
#define DEV_ENTRY_NO_PAGE_FAULT 0x62
#define DEV_ENTRY_EX 0x67
#define DEV_ENTRY_SYSMGT1 0x68
#define DEV_ENTRY_SYSMGT2 0x69
#define DEV_ENTRY_IRQ_TBL_EN 0x80
#define DEV_ENTRY_INIT_PASS 0xb8
#define DEV_ENTRY_EINT_PASS 0xb9
#define DEV_ENTRY_NMI_PASS 0xba
#define DEV_ENTRY_LINT0_PASS 0xbe
#define DEV_ENTRY_LINT1_PASS 0xbf
#define DEV_ENTRY_MODE_MASK 0x07
#define DEV_ENTRY_MODE_SHIFT 0x09
#define MAX_DEV_TABLE_ENTRIES 0xffff
/* constants to configure the command buffer */
#define CMD_BUFFER_SIZE 8192
#define CMD_BUFFER_UNINITIALIZED 1
#define CMD_BUFFER_ENTRIES 512
#define MMIO_CMD_SIZE_SHIFT 56
#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
/* constants for event buffer handling */
#define EVT_BUFFER_SIZE 8192 /* 512 entries */
#define EVT_LEN_MASK (0x9ULL << 56)
/* Constants for PPR Log handling */
#define PPR_LOG_ENTRIES 512
#define PPR_LOG_SIZE_SHIFT 56
#define PPR_LOG_SIZE_512 (0x9ULL << PPR_LOG_SIZE_SHIFT)
#define PPR_ENTRY_SIZE 16
#define PPR_LOG_SIZE (PPR_ENTRY_SIZE * PPR_LOG_ENTRIES)
#define PPR_REQ_TYPE(x) (((x) >> 60) & 0xfULL)
#define PPR_FLAGS(x) (((x) >> 48) & 0xfffULL)
#define PPR_DEVID(x) ((x) & 0xffffULL)
#define PPR_TAG(x) (((x) >> 32) & 0x3ffULL)
#define PPR_PASID1(x) (((x) >> 16) & 0xffffULL)
#define PPR_PASID2(x) (((x) >> 42) & 0xfULL)
#define PPR_PASID(x) ((PPR_PASID2(x) << 16) | PPR_PASID1(x))
#define PPR_REQ_FAULT 0x01
#define PAGE_MODE_NONE 0x00
#define PAGE_MODE_1_LEVEL 0x01
#define PAGE_MODE_2_LEVEL 0x02
#define PAGE_MODE_3_LEVEL 0x03
#define PAGE_MODE_4_LEVEL 0x04
#define PAGE_MODE_5_LEVEL 0x05
#define PAGE_MODE_6_LEVEL 0x06
#define PM_LEVEL_SHIFT(x) (12 + ((x) * 9))
#define PM_LEVEL_SIZE(x) (((x) < 6) ? \
((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
(0xffffffffffffffffULL))
#define PM_LEVEL_INDEX(x, a) (((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
#define PM_LEVEL_ENC(x) (((x) << 9) & 0xe00ULL)
#define PM_LEVEL_PDE(x, a) ((a) | PM_LEVEL_ENC((x)) | \
IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
#define PM_PTE_LEVEL(pte) (((pte) >> 9) & 0x7ULL)
#define PM_MAP_4k 0
#define PM_ADDR_MASK 0x000ffffffffff000ULL
#define PM_MAP_MASK(lvl) (PM_ADDR_MASK & \
(~((1ULL << (12 + ((lvl) * 9))) - 1)))
#define PM_ALIGNED(lvl, addr) ((PM_MAP_MASK(lvl) & (addr)) == (addr))
/*
* Returns the page table level to use for a given page size
* Pagesize is expected to be a power-of-two
*/
#define PAGE_SIZE_LEVEL(pagesize) \
((__ffs(pagesize) - 12) / 9)
/*
* Returns the number of ptes to use for a given page size
* Pagesize is expected to be a power-of-two
*/
#define PAGE_SIZE_PTE_COUNT(pagesize) \
(1ULL << ((__ffs(pagesize) - 12) % 9))
/*
* Aligns a given io-virtual address to a given page size
* Pagesize is expected to be a power-of-two
*/
#define PAGE_SIZE_ALIGN(address, pagesize) \
((address) & ~((pagesize) - 1))
/*
* Creates an IOMMU PTE for an address and a given pagesize
* The PTE has no permission bits set
* Pagesize is expected to be a power-of-two larger than 4096
*/
#define PAGE_SIZE_PTE(address, pagesize) \
(((address) | ((pagesize) - 1)) & \
(~(pagesize >> 1)) & PM_ADDR_MASK)
/*
* Takes a PTE value with mode=0x07 and returns the page size it maps
*/
#define PTE_PAGE_SIZE(pte) \
(1ULL << (1 + ffz(((pte) | 0xfffULL))))
#define IOMMU_PTE_P (1ULL << 0)
#define IOMMU_PTE_TV (1ULL << 1)
#define IOMMU_PTE_U (1ULL << 59)
#define IOMMU_PTE_FC (1ULL << 60)
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
#define DTE_FLAG_IOTLB (0x01UL << 32)
#define DTE_FLAG_GV (0x01ULL << 55)
#define DTE_GLX_SHIFT (56)
#define DTE_GLX_MASK (3)
#define DTE_GCR3_VAL_A(x) (((x) >> 12) & 0x00007ULL)
#define DTE_GCR3_VAL_B(x) (((x) >> 15) & 0x0ffffULL)
#define DTE_GCR3_VAL_C(x) (((x) >> 31) & 0xfffffULL)
#define DTE_GCR3_INDEX_A 0
#define DTE_GCR3_INDEX_B 1
#define DTE_GCR3_INDEX_C 1
#define DTE_GCR3_SHIFT_A 58
#define DTE_GCR3_SHIFT_B 16
#define DTE_GCR3_SHIFT_C 43
#define GCR3_VALID 0x01ULL
#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
#define IOMMU_PROT_MASK 0x03
#define IOMMU_PROT_IR 0x01
#define IOMMU_PROT_IW 0x02
/* IOMMU capabilities */
#define IOMMU_CAP_IOTLB 24
#define IOMMU_CAP_NPCACHE 26
#define IOMMU_CAP_EFR 27
#define MAX_DOMAIN_ID 65536
/* FIXME: move this macro to <linux/pci.h> */
#define PCI_BUS(x) (((x) >> 8) & 0xff)
/* Protection domain flags */
#define PD_DMA_OPS_MASK (1UL << 0) /* domain used for dma_ops */
#define PD_DEFAULT_MASK (1UL << 1) /* domain is a default dma_ops
domain for an IOMMU */
#define PD_PASSTHROUGH_MASK (1UL << 2) /* domain has no page
translation */
#define PD_IOMMUV2_MASK (1UL << 3) /* domain has gcr3 table */
extern bool amd_iommu_dump;
#define DUMP_printk(format, arg...) \
do { \
if (amd_iommu_dump) \
printk(KERN_INFO "AMD-Vi: " format, ## arg); \
} while(0);
/* global flag if IOMMUs cache non-present entries */
extern bool amd_iommu_np_cache;
/* Only true if all IOMMUs support device IOTLBs */
extern bool amd_iommu_iotlb_sup;
#define MAX_IRQS_PER_TABLE 256
#define IRQ_TABLE_ALIGNMENT 128
struct irq_remap_table {
spinlock_t lock;
unsigned min_index;
u32 *table;
};
extern struct irq_remap_table **irq_lookup_table;
/* Interrupt remapping feature used? */
extern bool amd_iommu_irq_remap;
/* kmem_cache to get tables with 128 byte alignement */
extern struct kmem_cache *amd_iommu_irq_cache;
/*
* Make iterating over all IOMMUs easier
*/
#define for_each_iommu(iommu) \
list_for_each_entry((iommu), &amd_iommu_list, list)
#define for_each_iommu_safe(iommu, next) \
list_for_each_entry_safe((iommu), (next), &amd_iommu_list, list)
#define APERTURE_RANGE_SHIFT 27 /* 128 MB */
#define APERTURE_RANGE_SIZE (1ULL << APERTURE_RANGE_SHIFT)
#define APERTURE_RANGE_PAGES (APERTURE_RANGE_SIZE >> PAGE_SHIFT)
#define APERTURE_MAX_RANGES 32 /* allows 4GB of DMA address space */
#define APERTURE_RANGE_INDEX(a) ((a) >> APERTURE_RANGE_SHIFT)
#define APERTURE_PAGE_INDEX(a) (((a) >> 21) & 0x3fULL)
/*
* This struct is used to pass information about
* incoming PPR faults around.
*/
struct amd_iommu_fault {
u64 address; /* IO virtual address of the fault*/
u32 pasid; /* Address space identifier */
u16 device_id; /* Originating PCI device id */
u16 tag; /* PPR tag */
u16 flags; /* Fault flags */
};
#define PPR_FAULT_EXEC (1 << 1)
#define PPR_FAULT_READ (1 << 2)
#define PPR_FAULT_WRITE (1 << 5)
#define PPR_FAULT_USER (1 << 6)
#define PPR_FAULT_RSVD (1 << 7)
#define PPR_FAULT_GN (1 << 8)
struct iommu_domain;
/*
* This structure contains generic data for IOMMU protection domains
* independent of their use.
*/
struct protection_domain {
struct list_head list; /* for list of all protection domains */
struct list_head dev_list; /* List of all devices in this domain */
spinlock_t lock; /* mostly used to lock the page table*/
struct mutex api_lock; /* protect page tables in the iommu-api path */
u16 id; /* the domain id written to the device table */
int mode; /* paging mode (0-6 levels) */
u64 *pt_root; /* page table root pointer */
int glx; /* Number of levels for GCR3 table */
u64 *gcr3_tbl; /* Guest CR3 table */
unsigned long flags; /* flags to find out type of domain */
bool updated; /* complete domain flush required */
unsigned dev_cnt; /* devices assigned to this domain */
unsigned dev_iommu[MAX_IOMMUS]; /* per-IOMMU reference count */
void *priv; /* private data */
struct iommu_domain *iommu_domain; /* Pointer to generic
domain structure */
};
/*
* This struct contains device specific data for the IOMMU
*/
struct iommu_dev_data {
struct list_head list; /* For domain->dev_list */
struct list_head dev_data_list; /* For global dev_data_list */
struct iommu_dev_data *alias_data;/* The alias dev_data */
struct protection_domain *domain; /* Domain the device is bound to */
atomic_t bind; /* Domain attach reference count */
struct iommu_group *group; /* IOMMU group for virtual aliases */
u16 devid; /* PCI Device ID */
bool iommu_v2; /* Device can make use of IOMMUv2 */
bool passthrough; /* Default for device is pt_domain */
struct {
bool enabled;
int qdep;
} ats; /* ATS state */
bool pri_tlp; /* PASID TLB required for
PPR completions */
u32 errata; /* Bitmap for errata to apply */
};
/*
* For dynamic growth the aperture size is split into ranges of 128MB of
* DMA address space each. This struct represents one such range.
*/
struct aperture_range {
/* address allocation bitmap */
unsigned long *bitmap;
/*
* Array of PTE pages for the aperture. In this array we save all the
* leaf pages of the domain page table used for the aperture. This way
* we don't need to walk the page table to find a specific PTE. We can
* just calculate its address in constant time.
*/
u64 *pte_pages[64];
unsigned long offset;
};
/*
* Data container for a dma_ops specific protection domain
*/
struct dma_ops_domain {
struct list_head list;
/* generic protection domain information */
struct protection_domain domain;
/* size of the aperture for the mappings */
unsigned long aperture_size;
/* address we start to search for free addresses */
unsigned long next_address;
/* address space relevant data */
struct aperture_range *aperture[APERTURE_MAX_RANGES];
/* This will be set to true when TLB needs to be flushed */
bool need_flush;
/*
* if this is a preallocated domain, keep the device for which it was
* preallocated in this variable
*/
u16 target_dev;
};
/*
* Structure where we save information about one hardware AMD IOMMU in the
* system.
*/
struct amd_iommu {
struct list_head list;
/* Index within the IOMMU array */
int index;
/* locks the accesses to the hardware */
spinlock_t lock;
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
/* Cache pdev to root device for resume quirks */
struct pci_dev *root_pdev;
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
u8 __iomem *mmio_base;
/* capabilities of that IOMMU read from ACPI */
u32 cap;
/* flags read from acpi table */
u8 acpi_flags;
/* Extended features */
u64 features;
/* IOMMUv2 */
bool is_iommu_v2;
/* PCI device id of the IOMMU device */
u16 devid;
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
* pointers.
*/
u16 cap_ptr;
/* pci domain of this IOMMU */
u16 pci_seg;
/* first device this IOMMU handles. read from PCI */
u16 first_device;
/* last device this IOMMU handles. read from PCI */
u16 last_device;
/* start of exclusion range of that IOMMU */
u64 exclusion_start;
/* length of exclusion range of that IOMMU */
u64 exclusion_length;
/* command buffer virtual address */
u8 *cmd_buf;
/* size of command buffer */
u32 cmd_buf_size;
/* size of event buffer */
u32 evt_buf_size;
/* event buffer virtual address */
u8 *evt_buf;
/* Base of the PPR log, if present */
u8 *ppr_log;
/* true if interrupts for this IOMMU are already enabled */
bool int_enabled;
/* if one, we need to send a completion wait command */
bool need_sync;
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
/*
* We can't rely on the BIOS to restore all values on reinit, so we
* need to stash them
*/
/* The iommu BAR */
u32 stored_addr_lo;
u32 stored_addr_hi;
/*
* Each iommu has 6 l1s, each of which is documented as having 0x12
* registers
*/
u32 stored_l1[6][0x12];
/* The l2 indirect registers */
u32 stored_l2[0x83];
};
struct devid_map {
struct list_head list;
u8 id;
u16 devid;
};
/* Map HPET and IOAPIC ids to the devid used by the IOMMU */
extern struct list_head ioapic_map;
extern struct list_head hpet_map;
/*
* List with all IOMMUs in the system. This list is not locked because it is
* only written and read at driver initialization or suspend time
*/
extern struct list_head amd_iommu_list;
/*
* Array with pointers to each IOMMU struct
* The indices are referenced in the protection domains
*/
extern struct amd_iommu *amd_iommus[MAX_IOMMUS];
/* Number of IOMMUs present in the system */
extern int amd_iommus_present;
/*
* Declarations for the global list of all protection domains
*/
extern spinlock_t amd_iommu_pd_lock;
extern struct list_head amd_iommu_pd_list;
/*
* Structure defining one entry in the device table
*/
struct dev_table_entry {
u64 data[4];
};
/*
* One entry for unity mappings parsed out of the ACPI table.
*/
struct unity_map_entry {
struct list_head list;
/* starting device id this entry is used for (including) */
u16 devid_start;
/* end device id this entry is used for (including) */
u16 devid_end;
/* start address to unity map (including) */
u64 address_start;
/* end address to unity map (including) */
u64 address_end;
/* required protection */
int prot;
};
/*
* List of all unity mappings. It is not locked because as runtime it is only
* read. It is created at ACPI table parsing time.
*/
extern struct list_head amd_iommu_unity_map;
/*
* Data structures for device handling
*/
/*
* Device table used by hardware. Read and write accesses by software are
* locked with the amd_iommu_pd_table lock.
*/
extern struct dev_table_entry *amd_iommu_dev_table;
/*
* Alias table to find requestor ids to device ids. Not locked because only
* read on runtime.
*/
extern u16 *amd_iommu_alias_table;
/*
* Reverse lookup table to find the IOMMU which translates a specific device.
*/
extern struct amd_iommu **amd_iommu_rlookup_table;
/* size of the dma_ops aperture as power of 2 */
extern unsigned amd_iommu_aperture_order;
/* largest PCI device id we expect translation requests for */
extern u16 amd_iommu_last_bdf;
/* allocation bitmap for domain ids */
extern unsigned long *amd_iommu_pd_alloc_bitmap;
/*
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
extern bool amd_iommu_v2_present;
extern bool amd_iommu_force_isolation;
/* Max levels of glxval supported */
extern int amd_iommu_max_glx_val;
/*
* This function flushes all internal caches of
* the IOMMU used by this driver.
*/
extern void iommu_flush_all_caches(struct amd_iommu *iommu);
/* takes bus and device/function and returns the device id
* FIXME: should that be in generic PCI code? */
static inline u16 calc_devid(u8 bus, u8 devfn)
{
return (((u16)bus) << 8) | devfn;
}
static inline int get_ioapic_devid(int id)
{
struct devid_map *entry;
list_for_each_entry(entry, &ioapic_map, list) {
if (entry->id == id)
return entry->devid;
}
return -EINVAL;
}
static inline int get_hpet_devid(int id)
{
struct devid_map *entry;
list_for_each_entry(entry, &hpet_map, list) {
if (entry->id == id)
return entry->devid;
}
return -EINVAL;
}
#ifdef CONFIG_AMD_IOMMU_STATS
struct __iommu_counter {
char *name;
struct dentry *dent;
u64 value;
};
#define DECLARE_STATS_COUNTER(nm) \
static struct __iommu_counter nm = { \
.name = #nm, \
}
#define INC_STATS_COUNTER(name) name.value += 1
#define ADD_STATS_COUNTER(name, x) name.value += (x)
#define SUB_STATS_COUNTER(name, x) name.value -= (x)
#else /* CONFIG_AMD_IOMMU_STATS */
#define DECLARE_STATS_COUNTER(name)
#define INC_STATS_COUNTER(name)
#define ADD_STATS_COUNTER(name, x)
#define SUB_STATS_COUNTER(name, x)
#endif /* CONFIG_AMD_IOMMU_STATS */
#endif /* _ASM_X86_AMD_IOMMU_TYPES_H */