swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 7daf201d7fe8334e2d2364d4e8ed3394ec9af819 authored by Linus Torvalds on 24 June 2018, 12:54:29 UTC
Linux 4.18-rc2
Linux 4.18-rc2
Tip revision: 7daf201
lgdt330x.c
/*
* Support for LGDT3302 and LGDT3303 - VSB/QAM
*
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
/*
* NOTES ABOUT THIS DRIVER
*
* This Linux driver supports:
* DViCO FusionHDTV 3 Gold-Q
* DViCO FusionHDTV 3 Gold-T
* DViCO FusionHDTV 5 Gold
* DViCO FusionHDTV 5 Lite
* DViCO FusionHDTV 5 USB Gold
* Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
* pcHDTV HD5500
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <media/dvb_frontend.h>
#include <media/dvb_math.h>
#include "lgdt330x_priv.h"
#include "lgdt330x.h"
/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
/* #define USE_EQMSE */
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off lgdt330x frontend debugging (default:off).");
#define dprintk(state, fmt, arg...) do { \
if (debug) \
dev_printk(KERN_DEBUG, &state->client->dev, fmt, ##arg);\
} while (0)
struct lgdt330x_state {
struct i2c_client *client;
/* Configuration settings */
struct lgdt330x_config config;
struct dvb_frontend frontend;
/* Demodulator private data */
enum fe_modulation current_modulation;
u32 snr; /* Result of last SNR calculation */
u16 ucblocks;
unsigned long last_stats_time;
/* Tuner private data */
u32 current_frequency;
};
static int i2c_write_demod_bytes(struct lgdt330x_state *state,
const u8 *buf, /* data bytes to send */
int len /* number of bytes to send */)
{
int i;
int err;
for (i = 0; i < len - 1; i += 2) {
err = i2c_master_send(state->client, buf, 2);
if (err != 2) {
dev_warn(&state->client->dev,
"%s: error (addr %02x <- %02x, err = %i)\n",
__func__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
buf += 2;
}
return 0;
}
/*
* This routine writes the register (reg) to the demod bus
* then reads the data returned for (len) bytes.
*/
static int i2c_read_demod_bytes(struct lgdt330x_state *state,
enum I2C_REG reg, u8 *buf, int len)
{
u8 wr[] = { reg };
struct i2c_msg msg[] = {
{
.addr = state->client->addr,
.flags = 0,
.buf = wr,
.len = 1
}, {
.addr = state->client->addr,
.flags = I2C_M_RD,
.buf = buf,
.len = len
},
};
int ret;
ret = i2c_transfer(state->client->adapter, msg, 2);
if (ret != 2) {
dev_warn(&state->client->dev,
"%s: addr 0x%02x select 0x%02x error (ret == %i)\n",
__func__, state->client->addr, reg, ret);
if (ret >= 0)
ret = -EIO;
} else {
ret = 0;
}
return ret;
}
/* Software reset */
static int lgdt3302_sw_reset(struct lgdt330x_state *state)
{
u8 ret;
u8 reset[] = {
IRQ_MASK,
/*
* bit 6 is active low software reset
* bits 5-0 are 1 to mask interrupts
*/
0x00
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) and unmask interrupts */
reset[1] = 0x7f;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
}
return ret;
}
static int lgdt3303_sw_reset(struct lgdt330x_state *state)
{
u8 ret;
u8 reset[] = {
0x02,
0x00 /* bit 0 is active low software reset */
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) */
reset[1] = 0x01;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
}
return ret;
}
static int lgdt330x_sw_reset(struct lgdt330x_state *state)
{
switch (state->config.demod_chip) {
case LGDT3302:
return lgdt3302_sw_reset(state);
case LGDT3303:
return lgdt3303_sw_reset(state);
default:
return -ENODEV;
}
}
static int lgdt330x_init(struct dvb_frontend *fe)
{
struct lgdt330x_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
char *chip_name;
int err;
/*
* Array of byte pairs <address, value>
* to initialize each different chip
*/
static const u8 lgdt3302_init_data[] = {
/* Use 50MHz param values from spec sheet since xtal is 50 */
/*
* Change the value of NCOCTFV[25:0] of carrier
* recovery center frequency register
*/
VSB_CARRIER_FREQ0, 0x00,
VSB_CARRIER_FREQ1, 0x87,
VSB_CARRIER_FREQ2, 0x8e,
VSB_CARRIER_FREQ3, 0x01,
/*
* Change the TPCLK pin polarity
* data is valid on falling clock
*/
DEMUX_CONTROL, 0xfb,
/*
* Change the value of IFBW[11:0] of
* AGC IF/RF loop filter bandwidth register
*/
AGC_RF_BANDWIDTH0, 0x40,
AGC_RF_BANDWIDTH1, 0x93,
AGC_RF_BANDWIDTH2, 0x00,
/*
* Change the value of bit 6, 'nINAGCBY' and
* 'NSSEL[1:0] of ACG function control register 2
*/
AGC_FUNC_CTRL2, 0xc6,
/*
* Change the value of bit 6 'RFFIX'
* of AGC function control register 3
*/
AGC_FUNC_CTRL3, 0x40,
/*
* Set the value of 'INLVTHD' register 0x2a/0x2c
* to 0x7fe
*/
AGC_DELAY0, 0x07,
AGC_DELAY2, 0xfe,
/*
* Change the value of IAGCBW[15:8]
* of inner AGC loop filter bandwidth
*/
AGC_LOOP_BANDWIDTH0, 0x08,
AGC_LOOP_BANDWIDTH1, 0x9a
};
static const u8 lgdt3303_init_data[] = {
0x4c, 0x14
};
static const u8 flip_1_lgdt3303_init_data[] = {
0x4c, 0x14,
0x87, 0xf3
};
static const u8 flip_2_lgdt3303_init_data[] = {
0x4c, 0x14,
0x87, 0xda
};
/*
* Hardware reset is done using gpio[0] of cx23880x chip.
* I'd like to do it here, but don't know how to find chip address.
* cx88-cards.c arranges for the reset bit to be inactive (high).
* Maybe there needs to be a callable function in cx88-core or
* the caller of this function needs to do it.
*/
switch (state->config.demod_chip) {
case LGDT3302:
chip_name = "LGDT3302";
err = i2c_write_demod_bytes(state, lgdt3302_init_data,
sizeof(lgdt3302_init_data));
break;
case LGDT3303:
chip_name = "LGDT3303";
switch (state->config.clock_polarity_flip) {
case 2:
err = i2c_write_demod_bytes(state,
flip_2_lgdt3303_init_data,
sizeof(flip_2_lgdt3303_init_data));
break;
case 1:
err = i2c_write_demod_bytes(state,
flip_1_lgdt3303_init_data,
sizeof(flip_1_lgdt3303_init_data));
break;
case 0:
default:
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
sizeof(lgdt3303_init_data));
}
break;
default:
chip_name = "undefined";
dev_warn(&state->client->dev,
"Only LGDT3302 and LGDT3303 are supported chips.\n");
err = -ENODEV;
}
dprintk(state, "Initialized the %s chip\n", chip_name);
if (err < 0)
return err;
p->cnr.len = 1;
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.len = 1;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.len = 1;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
state->last_stats_time = 0;
return lgdt330x_sw_reset(state);
}
static int lgdt330x_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct lgdt330x_state *state = fe->demodulator_priv;
*ucblocks = state->ucblocks;
return 0;
}
static int lgdt330x_set_parameters(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct lgdt330x_state *state = fe->demodulator_priv;
/*
* Array of byte pairs <address, value>
* to initialize 8VSB for lgdt3303 chip 50 MHz IF
*/
static const u8 lgdt3303_8vsb_44_data[] = {
0x04, 0x00,
0x0d, 0x40,
0x0e, 0x87,
0x0f, 0x8e,
0x10, 0x01,
0x47, 0x8b
};
/*
* Array of byte pairs <address, value>
* to initialize QAM for lgdt3303 chip
*/
static const u8 lgdt3303_qam_data[] = {
0x04, 0x00,
0x0d, 0x00,
0x0e, 0x00,
0x0f, 0x00,
0x10, 0x00,
0x51, 0x63,
0x47, 0x66,
0x48, 0x66,
0x4d, 0x1a,
0x49, 0x08,
0x4a, 0x9b
};
u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
int err = 0;
/* Change only if we are actually changing the modulation */
if (state->current_modulation != p->modulation) {
switch (p->modulation) {
case VSB_8:
dprintk(state, "VSB_8 MODE\n");
/* Select VSB mode */
top_ctrl_cfg[1] = 0x03;
/* Select ANT connector if supported by card */
if (state->config.pll_rf_set)
state->config.pll_rf_set(fe, 1);
if (state->config.demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state,
lgdt3303_8vsb_44_data,
sizeof(lgdt3303_8vsb_44_data));
}
break;
case QAM_64:
dprintk(state, "QAM_64 MODE\n");
/* Select QAM_64 mode */
top_ctrl_cfg[1] = 0x00;
/* Select CABLE connector if supported by card */
if (state->config.pll_rf_set)
state->config.pll_rf_set(fe, 0);
if (state->config.demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state,
lgdt3303_qam_data,
sizeof(lgdt3303_qam_data));
}
break;
case QAM_256:
dprintk(state, "QAM_256 MODE\n");
/* Select QAM_256 mode */
top_ctrl_cfg[1] = 0x01;
/* Select CABLE connector if supported by card */
if (state->config.pll_rf_set)
state->config.pll_rf_set(fe, 0);
if (state->config.demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state,
lgdt3303_qam_data,
sizeof(lgdt3303_qam_data));
}
break;
default:
dev_warn(&state->client->dev,
"%s: Modulation type(%d) UNSUPPORTED\n",
__func__, p->modulation);
return -1;
}
if (err < 0)
dev_warn(&state->client->dev,
"%s: error blasting bytes to lgdt3303 for modulation type(%d)\n",
__func__, p->modulation);
/*
* select serial or parallel MPEG hardware interface
* Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303
* Parallel: 0x00
*/
top_ctrl_cfg[1] |= state->config.serial_mpeg;
/* Select the requested mode */
i2c_write_demod_bytes(state, top_ctrl_cfg,
sizeof(top_ctrl_cfg));
if (state->config.set_ts_params)
state->config.set_ts_params(fe, 0);
state->current_modulation = p->modulation;
}
/* Tune to the specified frequency */
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
/* Keep track of the new frequency */
/*
* FIXME this is the wrong way to do this...
* The tuner is shared with the video4linux analog API
*/
state->current_frequency = p->frequency;
lgdt330x_sw_reset(state);
return 0;
}
static int lgdt330x_get_frontend(struct dvb_frontend *fe,
struct dtv_frontend_properties *p)
{
struct lgdt330x_state *state = fe->demodulator_priv;
p->frequency = state->current_frequency;
return 0;
}
/*
* Calculate SNR estimation (scaled by 2^24)
*
* 8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
* equations from LGDT3303 datasheet. VSB is the same between the '02
* and '03, so maybe QAM is too? Perhaps someone with a newer datasheet
* that has QAM information could verify?
*
* For 8-VSB: (two ways, take your pick)
* LGDT3302:
* SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
* LGDT3303:
* SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
* LGDT3302 & LGDT3303:
* SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one)
* For 64-QAM:
* SNR = 10 * log10( 688128 / MSEQAM)
* For 256-QAM:
* SNR = 10 * log10( 696320 / MSEQAM)
*
* We re-write the snr equation as:
* SNR * 2^24 = 10*(c - intlog10(MSE))
* Where for 256-QAM, c = log10(696320) * 2^24, and so on.
*/
static u32 calculate_snr(u32 mse, u32 c)
{
if (mse == 0) /* No signal */
return 0;
mse = intlog10(mse);
if (mse > c) {
/*
* Negative SNR, which is possible, but realisticly the
* demod will lose lock before the signal gets this bad.
* The API only allows for unsigned values, so just return 0
*/
return 0;
}
return 10 * (c - mse);
}
static int lgdt3302_read_snr(struct dvb_frontend *fe)
{
struct lgdt330x_state *state = fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
switch (state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -15.61 to +41.58 */
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
c = 69765745; /* log10(25*24^2)*2^24 */
#else
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7 << 3) << 13) | (buf[3] << 8) | buf[4];
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = ((buf[0] & 3) << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
dev_err(&state->client->dev,
"%s: Modulation set to unsupported value\n",
__func__);
state->snr = 0;
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
state->snr = calculate_snr(noise, c);
dprintk(state, "noise = 0x%08x, snr = %d.%02d dB\n", noise,
state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt3303_read_snr(struct dvb_frontend *fe)
{
struct lgdt330x_state *state = fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
switch (state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -16.12 to +44.08 */
noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
c = 73957994; /* log10(25*32^2)*2^24 */
#else
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = (buf[0] << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
dev_err(&state->client->dev,
"%s: Modulation set to unsupported value\n",
__func__);
state->snr = 0;
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
state->snr = calculate_snr(noise, c);
dprintk(state, "noise = 0x%08x, snr = %d.%02d dB\n", noise,
state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt330x_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct lgdt330x_state *state = fe->demodulator_priv;
*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
return 0;
}
static int lgdt330x_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
/* Calculate Strength from SNR up to 35dB */
/*
* Even though the SNR can go higher than 35dB, there is some comfort
* factor in having a range of strong signals that can show at 100%
*/
struct lgdt330x_state *state = fe->demodulator_priv;
u16 snr;
int ret;
ret = fe->ops.read_snr(fe, &snr);
if (ret != 0)
return ret;
/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
/* scale the range 0 - 35*2^24 into 0 - 65535 */
if (state->snr >= 8960 * 0x10000)
*strength = 0xffff;
else
*strength = state->snr / 8960;
return 0;
}
static int lgdt3302_read_status(struct dvb_frontend *fe,
enum fe_status *status)
{
struct lgdt330x_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
u8 buf[3];
int err;
*status = 0; /* Reset status result */
/* AGC status register */
i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
dprintk(state, "AGC_STATUS = 0x%02x\n", buf[0]);
if ((buf[0] & 0x0c) == 0x8) {
/*
* Test signal does not exist flag
* as well as the AGC lock flag.
*/
*status |= FE_HAS_SIGNAL;
}
/*
* You must set the Mask bits to 1 in the IRQ_MASK in order
* to see that status bit in the IRQ_STATUS register.
* This is done in SwReset();
*/
/* signal status */
i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
dprintk(state,
"TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n",
buf[0], buf[1], buf[2]);
/* sync status */
if ((buf[2] & 0x03) == 0x01)
*status |= FE_HAS_SYNC;
/* FEC error status */
if ((buf[2] & 0x0c) == 0x08)
*status |= FE_HAS_LOCK | FE_HAS_VITERBI;
/* Carrier Recovery Lock Status Register */
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
dprintk(state, "CARRIER_LOCK = 0x%02x\n", buf[0]);
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
/* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
break;
case VSB_8:
if ((buf[0] & 0x80) == 0x80)
*status |= FE_HAS_CARRIER;
break;
default:
dev_warn(&state->client->dev,
"%s: Modulation set to unsupported value\n",
__func__);
}
if (!(*status & FE_HAS_LOCK)) {
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
return 0;
}
if (state->last_stats_time &&
time_is_after_jiffies(state->last_stats_time))
return 0;
state->last_stats_time = jiffies + msecs_to_jiffies(1000);
err = lgdt3302_read_snr(fe);
if (!err) {
p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
p->cnr.stat[0].svalue = (((u64)state->snr) * 1000) >> 24;
} else {
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
if (!err) {
state->ucblocks = (buf[0] << 8) | buf[1];
dprintk(state, "UCB = 0x%02x\n", state->ucblocks);
p->block_error.stat[0].uvalue += state->ucblocks;
/* FIXME: what's the basis for block count */
p->block_count.stat[0].uvalue += 10000;
p->block_error.stat[0].scale = FE_SCALE_COUNTER;
p->block_count.stat[0].scale = FE_SCALE_COUNTER;
} else {
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
return 0;
}
static int lgdt3303_read_status(struct dvb_frontend *fe,
enum fe_status *status)
{
struct lgdt330x_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
u8 buf[3];
int err;
*status = 0; /* Reset status result */
/* lgdt3303 AGC status register */
err = i2c_read_demod_bytes(state, 0x58, buf, 1);
if (err < 0)
return err;
dprintk(state, "AGC_STATUS = 0x%02x\n", buf[0]);
if ((buf[0] & 0x21) == 0x01) {
/*
* Test input signal does not exist flag
* as well as the AGC lock flag.
*/
*status |= FE_HAS_SIGNAL;
}
/* Carrier Recovery Lock Status Register */
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
dprintk(state, "CARRIER_LOCK = 0x%02x\n", buf[0]);
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
/* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
else
break;
i2c_read_demod_bytes(state, 0x8a, buf, 1);
dprintk(state, "QAM LOCK = 0x%02x\n", buf[0]);
if ((buf[0] & 0x04) == 0x04)
*status |= FE_HAS_SYNC;
if ((buf[0] & 0x01) == 0x01)
*status |= FE_HAS_LOCK;
if ((buf[0] & 0x08) == 0x08)
*status |= FE_HAS_VITERBI;
break;
case VSB_8:
if ((buf[0] & 0x80) == 0x80)
*status |= FE_HAS_CARRIER;
else
break;
i2c_read_demod_bytes(state, 0x38, buf, 1);
dprintk(state, "8-VSB LOCK = 0x%02x\n", buf[0]);
if ((buf[0] & 0x02) == 0x00)
*status |= FE_HAS_SYNC;
if ((buf[0] & 0xfd) == 0x01)
*status |= FE_HAS_VITERBI | FE_HAS_LOCK;
break;
default:
dev_warn(&state->client->dev,
"%s: Modulation set to unsupported value\n",
__func__);
}
if (!(*status & FE_HAS_LOCK)) {
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
return 0;
}
if (state->last_stats_time &&
time_is_after_jiffies(state->last_stats_time))
return 0;
state->last_stats_time = jiffies + msecs_to_jiffies(1000);
err = lgdt3303_read_snr(fe);
if (!err) {
p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
p->cnr.stat[0].svalue = (((u64)state->snr) * 1000) >> 24;
} else {
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
if (!err) {
state->ucblocks = (buf[0] << 8) | buf[1];
dprintk(state, "UCB = 0x%02x\n", state->ucblocks);
p->block_error.stat[0].uvalue += state->ucblocks;
/* FIXME: what's the basis for block count */
p->block_count.stat[0].uvalue += 10000;
p->block_error.stat[0].scale = FE_SCALE_COUNTER;
p->block_count.stat[0].scale = FE_SCALE_COUNTER;
} else {
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
return 0;
}
static int
lgdt330x_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *fe_tune_settings)
{
/* I have no idea about this - it may not be needed */
fe_tune_settings->min_delay_ms = 500;
fe_tune_settings->step_size = 0;
fe_tune_settings->max_drift = 0;
return 0;
}
static void lgdt330x_release(struct dvb_frontend *fe)
{
struct lgdt330x_state *state = fe->demodulator_priv;
struct i2c_client *client = state->client;
dev_dbg(&client->dev, "\n");
i2c_unregister_device(client);
}
static struct dvb_frontend *lgdt330x_get_dvb_frontend(struct i2c_client *client)
{
struct lgdt330x_state *state = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return &state->frontend;
}
static const struct dvb_frontend_ops lgdt3302_ops;
static const struct dvb_frontend_ops lgdt3303_ops;
static int lgdt330x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lgdt330x_state *state = NULL;
u8 buf[1];
/* Allocate memory for the internal state */
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
goto error;
/* Setup the state */
memcpy(&state->config, client->dev.platform_data,
sizeof(state->config));
i2c_set_clientdata(client, state);
state->client = client;
/* Create dvb_frontend */
switch (state->config.demod_chip) {
case LGDT3302:
memcpy(&state->frontend.ops, &lgdt3302_ops,
sizeof(struct dvb_frontend_ops));
break;
case LGDT3303:
memcpy(&state->frontend.ops, &lgdt3303_ops,
sizeof(struct dvb_frontend_ops));
break;
default:
goto error;
}
state->frontend.demodulator_priv = state;
/* Setup get frontend callback */
state->config.get_dvb_frontend = lgdt330x_get_dvb_frontend;
/* Verify communication with demod chip */
if (i2c_read_demod_bytes(state, 2, buf, 1))
goto error;
state->current_frequency = -1;
state->current_modulation = -1;
dev_info(&state->client->dev,
"Demod loaded for LGDT330%s chip\n",
state->config.demod_chip == LGDT3302 ? "2" : "3");
return 0;
error:
kfree(state);
if (debug)
dev_printk(KERN_DEBUG, &client->dev, "Error loading lgdt330x driver\n");
return -ENODEV;
}
struct dvb_frontend *lgdt330x_attach(const struct lgdt330x_config *_config,
u8 demod_address,
struct i2c_adapter *i2c)
{
struct i2c_client *client;
struct i2c_board_info board_info = {};
struct lgdt330x_config config = *_config;
strlcpy(board_info.type, "lgdt330x", sizeof(board_info.type));
board_info.addr = demod_address;
board_info.platform_data = &config;
client = i2c_new_device(i2c, &board_info);
if (!client || !client->dev.driver)
return NULL;
return lgdt330x_get_dvb_frontend(client);
}
EXPORT_SYMBOL(lgdt330x_attach);
static const struct dvb_frontend_ops lgdt3302_ops = {
.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name = "LG Electronics LGDT3302 VSB/QAM Frontend",
.frequency_min = 54000000,
.frequency_max = 858000000,
.frequency_stepsize = 62500,
.symbol_rate_min = 5056941, /* QAM 64 */
.symbol_rate_max = 10762000, /* VSB 8 */
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
},
.init = lgdt330x_init,
.set_frontend = lgdt330x_set_parameters,
.get_frontend = lgdt330x_get_frontend,
.get_tune_settings = lgdt330x_get_tune_settings,
.read_status = lgdt3302_read_status,
.read_signal_strength = lgdt330x_read_signal_strength,
.read_snr = lgdt330x_read_snr,
.read_ucblocks = lgdt330x_read_ucblocks,
.release = lgdt330x_release,
};
static const struct dvb_frontend_ops lgdt3303_ops = {
.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name = "LG Electronics LGDT3303 VSB/QAM Frontend",
.frequency_min = 54000000,
.frequency_max = 858000000,
.frequency_stepsize = 62500,
.symbol_rate_min = 5056941, /* QAM 64 */
.symbol_rate_max = 10762000, /* VSB 8 */
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
},
.init = lgdt330x_init,
.set_frontend = lgdt330x_set_parameters,
.get_frontend = lgdt330x_get_frontend,
.get_tune_settings = lgdt330x_get_tune_settings,
.read_status = lgdt3303_read_status,
.read_signal_strength = lgdt330x_read_signal_strength,
.read_snr = lgdt330x_read_snr,
.read_ucblocks = lgdt330x_read_ucblocks,
.release = lgdt330x_release,
};
static int lgdt330x_remove(struct i2c_client *client)
{
struct lgdt330x_state *state = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
kfree(state);
return 0;
}
static const struct i2c_device_id lgdt330x_id_table[] = {
{"lgdt330x", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, lgdt330x_id_table);
static struct i2c_driver lgdt330x_driver = {
.driver = {
.name = "lgdt330x",
.suppress_bind_attrs = true,
},
.probe = lgdt330x_probe,
.remove = lgdt330x_remove,
.id_table = lgdt330x_id_table,
};
module_i2c_driver(lgdt330x_driver);
MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
MODULE_AUTHOR("Wilson Michaels");
MODULE_LICENSE("GPL");