swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 7d2a07b769330c34b4deabeed939325c77a7ec2f authored by Linus Torvalds on 29 August 2021, 22:04:50 UTC
Linux 5.14
Linux 5.14
Tip revision: 7d2a07b
lnbh25.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lnbh25.c
*
* Driver for LNB supply and control IC LNBH25
*
* Copyright (C) 2014 NetUP Inc.
* Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
* Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <media/dvb_frontend.h>
#include "lnbh25.h"
/**
* struct lnbh25_priv - LNBH25 driver private data
* @i2c: pointer to the I2C adapter structure
* @i2c_address: I2C address of LNBH25 SEC chip
* @config: Registers configuration:
* offset 0: 1st register address, always 0x02 (DATA1)
* offset 1: DATA1 register value
* offset 2: DATA2 register value
*/
struct lnbh25_priv {
struct i2c_adapter *i2c;
u8 i2c_address;
u8 config[3];
};
#define LNBH25_STATUS_OFL 0x1
#define LNBH25_STATUS_VMON 0x4
#define LNBH25_VSEL_13 0x03
#define LNBH25_VSEL_18 0x0a
static int lnbh25_read_vmon(struct lnbh25_priv *priv)
{
int i, ret;
u8 addr = 0x00;
u8 status[6];
struct i2c_msg msg[2] = {
{
.addr = priv->i2c_address,
.flags = 0,
.len = 1,
.buf = &addr
}, {
.addr = priv->i2c_address,
.flags = I2C_M_RD,
.len = sizeof(status),
.buf = status
}
};
for (i = 0; i < 2; i++) {
ret = i2c_transfer(priv->i2c, &msg[i], 1);
if (ret >= 0 && ret != 1)
ret = -EIO;
if (ret < 0) {
dev_dbg(&priv->i2c->dev,
"%s(): I2C transfer %d failed (%d)\n",
__func__, i, ret);
return ret;
}
}
dev_dbg(&priv->i2c->dev, "%s(): %*ph\n",
__func__, (int) sizeof(status), status);
if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) {
dev_err(&priv->i2c->dev,
"%s(): voltage in failure state, status reg 0x%x\n",
__func__, status[0]);
return -EIO;
}
return 0;
}
static int lnbh25_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage voltage)
{
int ret;
u8 data1_reg;
const char *vsel;
struct lnbh25_priv *priv = fe->sec_priv;
struct i2c_msg msg = {
.addr = priv->i2c_address,
.flags = 0,
.len = sizeof(priv->config),
.buf = priv->config
};
switch (voltage) {
case SEC_VOLTAGE_OFF:
data1_reg = 0x00;
vsel = "Off";
break;
case SEC_VOLTAGE_13:
data1_reg = LNBH25_VSEL_13;
vsel = "13V";
break;
case SEC_VOLTAGE_18:
data1_reg = LNBH25_VSEL_18;
vsel = "18V";
break;
default:
return -EINVAL;
}
priv->config[1] = data1_reg;
dev_dbg(&priv->i2c->dev,
"%s(): %s, I2C 0x%x write [ %02x %02x %02x ]\n",
__func__, vsel, priv->i2c_address,
priv->config[0], priv->config[1], priv->config[2]);
ret = i2c_transfer(priv->i2c, &msg, 1);
if (ret >= 0 && ret != 1)
ret = -EIO;
if (ret < 0) {
dev_err(&priv->i2c->dev, "%s(): I2C transfer error (%d)\n",
__func__, ret);
return ret;
}
if (voltage != SEC_VOLTAGE_OFF) {
msleep(120);
ret = lnbh25_read_vmon(priv);
} else {
msleep(20);
ret = 0;
}
return ret;
}
static void lnbh25_release(struct dvb_frontend *fe)
{
struct lnbh25_priv *priv = fe->sec_priv;
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF);
kfree(fe->sec_priv);
fe->sec_priv = NULL;
}
struct dvb_frontend *lnbh25_attach(struct dvb_frontend *fe,
struct lnbh25_config *cfg,
struct i2c_adapter *i2c)
{
struct lnbh25_priv *priv;
dev_dbg(&i2c->dev, "%s()\n", __func__);
priv = kzalloc(sizeof(struct lnbh25_priv), GFP_KERNEL);
if (!priv)
return NULL;
priv->i2c_address = (cfg->i2c_address >> 1);
priv->i2c = i2c;
priv->config[0] = 0x02;
priv->config[1] = 0x00;
priv->config[2] = cfg->data2_config;
fe->sec_priv = priv;
if (lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF)) {
dev_err(&i2c->dev,
"%s(): no LNBH25 found at I2C addr 0x%02x\n",
__func__, priv->i2c_address);
kfree(priv);
fe->sec_priv = NULL;
return NULL;
}
fe->ops.release_sec = lnbh25_release;
fe->ops.set_voltage = lnbh25_set_voltage;
dev_info(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
__func__, priv->i2c_address);
return fe;
}
EXPORT_SYMBOL(lnbh25_attach);
MODULE_DESCRIPTION("ST LNBH25 driver");
MODULE_AUTHOR("info@netup.ru");
MODULE_LICENSE("GPL");