swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 0ecfebd2b52404ae0c54a878c872bb93363ada36 authored by Linus Torvalds on 07 July 2019, 22:41:56 UTC
Linux 5.2
Linux 5.2
Tip revision: 0ecfebd
Kconfig
# SPDX-License-Identifier: GPL-2.0
#
# Multiplexer devices
#
config MULTIPLEXER
tristate
menu "Multiplexer drivers"
depends on MULTIPLEXER
config MUX_ADG792A
tristate "Analog Devices ADG792A/ADG792G Multiplexers"
depends on I2C
help
ADG792A and ADG792G Wide Bandwidth Triple 4:1 Multiplexers
The driver supports both operating the three multiplexers in
parallel and operating them independently.
To compile the driver as a module, choose M here: the module will
be called mux-adg792a.
config MUX_ADGS1408
tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers"
depends on SPI
help
ADGS1408 8:1 multiplexer and ADGS1409 double 4:1 multiplexer
switches.
To compile the driver as a module, choose M here: the module will
be called mux-adgs1408.
config MUX_GPIO
tristate "GPIO-controlled Multiplexer"
depends on GPIOLIB || COMPILE_TEST
help
GPIO-controlled Multiplexer controller.
The driver builds a single multiplexer controller using a number
of gpio pins. For N pins, there will be 2^N possible multiplexer
states. The GPIO pins can be connected (by the hardware) to several
multiplexers, which in that case will be operated in parallel.
To compile the driver as a module, choose M here: the module will
be called mux-gpio.
config MUX_MMIO
tristate "MMIO register bitfield-controlled Multiplexer"
depends on (OF && MFD_SYSCON) || COMPILE_TEST
help
MMIO register bitfield-controlled Multiplexer controller.
The driver builds multiplexer controllers for bitfields in a syscon
register. For N bit wide bitfields, there will be 2^N possible
multiplexer states.
To compile the driver as a module, choose M here: the module will
be called mux-mmio.
endmenu