swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 32b88194f71d6ae7768a29f87fbba454728273ee authored by Linus Torvalds on 25 October 2015, 01:39:47 UTC
Linux 4.3-rc7
Linux 4.3-rc7
Tip revision: 32b8819
setup-irq.c
/*
* drivers/pci/setup-irq.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
void __weak pcibios_update_irq(struct pci_dev *dev, int irq)
{
dev_dbg(&dev->dev, "assigning IRQ %02d\n", irq);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
static void pdev_fixup_irq(struct pci_dev *dev,
u8 (*swizzle)(struct pci_dev *, u8 *),
int (*map_irq)(const struct pci_dev *, u8, u8))
{
u8 pin, slot;
int irq = 0;
/* If this device is not on the primary bus, we need to figure out
which interrupt pin it will come in on. We know which slot it
will come in on 'cos that slot is where the bridge is. Each
time the interrupt line passes through a PCI-PCI bridge we must
apply the swizzle function. */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* Cope with illegal. */
if (pin > 4)
pin = 1;
if (pin != 0) {
/* Follow the chain of bridges, swizzling as we go. */
slot = (*swizzle)(dev, &pin);
irq = (*map_irq)(dev, slot, pin);
if (irq == -1)
irq = 0;
}
dev->irq = irq;
dev_dbg(&dev->dev, "fixup irq: got %d\n", dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
pcibios_update_irq(dev, irq);
}
void pci_fixup_irqs(u8 (*swizzle)(struct pci_dev *, u8 *),
int (*map_irq)(const struct pci_dev *, u8, u8))
{
struct pci_dev *dev = NULL;
for_each_pci_dev(dev)
pdev_fixup_irq(dev, swizzle, map_irq);
}
EXPORT_SYMBOL_GPL(pci_fixup_irqs);