swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 5edb56491d4812c42175980759da53388e5d86f5 authored by Linus Torvalds on 12 June 2016, 14:20:35 UTC
Linux 4.7-rc3
Linux 4.7-rc3
Tip revision: 5edb564
adis16203_core.c
/*
* ADIS16203 Programmable Digital Vibration Sensor driver
*
* Copyright 2030 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
#include "adis16203.h"
#define DRIVER_NAME "adis16203"
static const u8 adis16203_addresses[] = {
[ADIS16203_SCAN_INCLI_X] = ADIS16203_INCL_NULL,
};
static int adis16203_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
/* currently only one writable parameter which keeps this simple */
u8 addr = adis16203_addresses[chan->scan_index];
return adis_write_reg_16(st, addr, val & 0x3FFF);
}
static int adis16203_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
s16 val16;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return adis_single_conversion(indio_dev, chan,
ADIS16203_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
if (chan->channel == 0) {
*val = 1;
*val2 = 220000; /* 1.22 mV */
} else {
*val = 0;
*val2 = 610000; /* 0.61 mV */
}
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = -470; /* -0.47 C */
*val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_INCLI:
*val = 0;
*val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
*val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
bits = 14;
mutex_lock(&indio_dev->mlock);
addr = adis16203_addresses[chan->scan_index];
ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
}
val16 &= (1 << bits) - 1;
val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
*val = val16;
mutex_unlock(&indio_dev->mlock);
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
static const struct iio_chan_spec adis16203_channels[] = {
ADIS_SUPPLY_CHAN(ADIS16203_SUPPLY_OUT, ADIS16203_SCAN_SUPPLY, 0, 12),
ADIS_AUX_ADC_CHAN(ADIS16203_AUX_ADC, ADIS16203_SCAN_AUX_ADC, 0, 12),
ADIS_INCLI_CHAN(X, ADIS16203_XINCL_OUT, ADIS16203_SCAN_INCLI_X,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
/* Fixme: Not what it appears to be - see data sheet */
ADIS_INCLI_CHAN(Y, ADIS16203_YINCL_OUT, ADIS16203_SCAN_INCLI_Y,
0, 0, 14),
ADIS_TEMP_CHAN(ADIS16203_TEMP_OUT, ADIS16203_SCAN_TEMP, 0, 12),
IIO_CHAN_SOFT_TIMESTAMP(5),
};
static const struct iio_info adis16203_info = {
.read_raw = &adis16203_read_raw,
.write_raw = &adis16203_write_raw,
.update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
static const char * const adis16203_status_error_msgs[] = {
[ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16203_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16203_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16203_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16203_data = {
.read_delay = 20,
.msc_ctrl_reg = ADIS16203_MSC_CTRL,
.glob_cmd_reg = ADIS16203_GLOB_CMD,
.diag_stat_reg = ADIS16203_DIAG_STAT,
.self_test_mask = ADIS16203_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
.startup_delay = ADIS16203_STARTUP_DELAY,
.status_error_msgs = adis16203_status_error_msgs,
.status_error_mask = BIT(ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16203_DIAG_STAT_SPI_FAIL_BIT) |
BIT(ADIS16203_DIAG_STAT_FLASH_UPT_BIT) |
BIT(ADIS16203_DIAG_STAT_POWER_HIGH_BIT) |
BIT(ADIS16203_DIAG_STAT_POWER_LOW_BIT),
};
static int adis16203_probe(struct spi_device *spi)
{
int ret;
struct iio_dev *indio_dev;
struct adis *st;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->channels = adis16203_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16203_channels);
indio_dev->info = &adis16203_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = adis_init(st, indio_dev, spi, &adis16203_data);
if (ret)
return ret;
ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
return ret;
/* Get the device into a sane initial state */
ret = adis_initial_startup(st);
if (ret)
goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_cleanup_buffer_trigger;
return 0;
error_cleanup_buffer_trigger:
adis_cleanup_buffer_and_trigger(st, indio_dev);
return ret;
}
static int adis16203_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
adis_cleanup_buffer_and_trigger(st, indio_dev);
return 0;
}
static struct spi_driver adis16203_driver = {
.driver = {
.name = "adis16203",
},
.probe = adis16203_probe,
.remove = adis16203_remove,
};
module_spi_driver(adis16203_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16203 Programmable Digital Vibration Sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16203");