swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 1de9e8e70f5acc441550ca75433563d91b269bbe authored by Linus Torvalds on 16 January 2009, 20:43:00 UTC
Linux 2.6.29-rc2
Linux 2.6.29-rc2
Tip revision: 1de9e8e
initializers.c
/* Special Initializers for certain USB Mass Storage devices
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include "usb.h"
#include "initializers.h"
#include "debug.h"
#include "transport.h"
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
{
int result;
US_DEBUGP("Attempting to init eUSCSI bridge...\n");
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
0x01, 0x0, us->iobuf, 0x1, 5*HZ);
US_DEBUGP("-- result is %d\n", result);
return 0;
}
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
int res;
unsigned int partial;
static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Tag = 0;
bcb->DataTransferLength = cpu_to_le32(0);
bcb->Flags = bcb->Lun = 0;
bcb->Length = sizeof(init_string) - 1;
memset(bcb->CDB, 0, sizeof(bcb->CDB));
memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
US_BULK_CB_WRAP_LEN, &partial);
if(res)
return res;
US_DEBUGP("Getting status packet...\n");
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
return (res ? -1 : 0);
}
/* This places the HUAWEI E220 devices in multi-port mode */
int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
US_DEBUGP("usb_control_msg performing result is %d\n", result);
return (result ? 0 : -1);
}