swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: 836dc9e3fbbab0c30aa6e664417225f5c1fb1c39 authored by Linus Torvalds on 08 February 2013, 21:20:39 UTC
Linux 3.8-rc7
Linux 3.8-rc7
Tip revision: 836dc9e
initializers.c
/* Special Initializers for certain USB Mass Storage devices
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include "usb.h"
#include "initializers.h"
#include "debug.h"
#include "transport.h"
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
{
int result;
US_DEBUGP("Attempting to init eUSCSI bridge...\n");
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
0x01, 0x0, us->iobuf, 0x1, 5000);
US_DEBUGP("-- result is %d\n", result);
return 0;
}
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
int res;
unsigned int partial;
static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->Tag = 0;
bcb->DataTransferLength = cpu_to_le32(0);
bcb->Flags = bcb->Lun = 0;
bcb->Length = sizeof(init_string) - 1;
memset(bcb->CDB, 0, sizeof(bcb->CDB));
memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
US_BULK_CB_WRAP_LEN, &partial);
if (res)
return -EIO;
US_DEBUGP("Getting status packet...\n");
res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
US_BULK_CS_WRAP_LEN, &partial);
if (res)
return -EIO;
return 0;
}
/* This places the HUAWEI usb dongles in multi-port mode */
static int usb_stor_huawei_feature_init(struct us_data *us)
{
int result;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
/*
* It will send a scsi switch command called rewind' to huawei dongle.
* When the dongle receives this command at the first time,
* it will reboot immediately. After rebooted, it will ignore this command.
* So it is unnecessary to read its response.
*/
static int usb_stor_huawei_scsi_init(struct us_data *us)
{
int result = 0;
int act_len = 0;
struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcbw->Tag = 0;
bcbw->DataTransferLength = 0;
bcbw->Flags = bcbw->Lun = 0;
bcbw->Length = sizeof(rewind_cmd);
memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
US_BULK_CB_WRAP_LEN, &act_len);
US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
return result;
}
/*
* It tries to find the supported Huawei USB dongles.
* In Huawei, they assign the following product IDs
* for all of their mobile broadband dongles,
* including the new dongles in the future.
* So if the product ID is not included in this list,
* it means it is not Huawei's mobile broadband dongles.
*/
static int usb_stor_huawei_dongles_pid(struct us_data *us)
{
struct usb_interface_descriptor *idesc;
int idProduct;
idesc = &us->pusb_intf->cur_altsetting->desc;
idProduct = us->pusb_dev->descriptor.idProduct;
/* The first port is CDROM,
* means the dongle in the single port mode,
* and a switch command is required to be sent. */
if (idesc && idesc->bInterfaceNumber == 0) {
if ((idProduct == 0x1001)
|| (idProduct == 0x1003)
|| (idProduct == 0x1004)
|| (idProduct >= 0x1401 && idProduct <= 0x1500)
|| (idProduct >= 0x1505 && idProduct <= 0x1600)
|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
return 1;
}
}
return 0;
}
int usb_stor_huawei_init(struct us_data *us)
{
int result = 0;
if (usb_stor_huawei_dongles_pid(us)) {
if (us->pusb_dev->descriptor.idProduct >= 0x1446)
result = usb_stor_huawei_scsi_init(us);
else
result = usb_stor_huawei_feature_init(us);
}
return result;
}