swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 authored by Linus Torvalds on 29 April 2013, 00:36:01 UTC
Linux 3.9
Linux 3.9
Tip revision: c1be5a5
hpfb.c
/*
* HP300 Topcat framebuffer support (derived from macfb of all things)
* Phil Blundell <philb@gnu.org> 1998
* DIO-II, colour map and Catseye support by
* Kars de Jong <jongk@linux-m68k.org>, May 2004.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/dio.h>
#include <asm/io.h>
#include <asm/uaccess.h>
static struct fb_info fb_info = {
.fix = {
.id = "HP300 ",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.accel = FB_ACCEL_NONE,
}
};
static unsigned long fb_regs;
static unsigned char fb_bitmask;
#define TC_NBLANK 0x4080
#define TC_WEN 0x4088
#define TC_REN 0x408c
#define TC_FBEN 0x4090
#define TC_PRR 0x40ea
/* These defines match the X window system */
#define RR_CLEAR 0x0
#define RR_COPY 0x3
#define RR_NOOP 0x5
#define RR_XOR 0x6
#define RR_INVERT 0xa
#define RR_COPYINVERTED 0xc
#define RR_SET 0xf
/* blitter regs */
#define BUSY 0x4044
#define WMRR 0x40ef
#define SOURCE_X 0x40f2
#define SOURCE_Y 0x40f6
#define DEST_X 0x40fa
#define DEST_Y 0x40fe
#define WHEIGHT 0x4106
#define WWIDTH 0x4102
#define WMOVE 0x409c
static struct fb_var_screeninfo hpfb_defined = {
.red = {
.length = 8,
},
.green = {
.length = 8,
},
.blue = {
.length = 8,
},
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
.vmode = FB_VMODE_NONINTERLACED,
};
static int hpfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
/* use MSBs */
unsigned char _red =red>>8;
unsigned char _green=green>>8;
unsigned char _blue =blue>>8;
unsigned char _regno=regno;
/*
* Set a single color register. The values supplied are
* already rounded down to the hardware's capabilities
* (according to the entries in the `var' structure). Return
* != 0 for invalid regno.
*/
if (regno >= info->cmap.len)
return 1;
while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
out_be16(fb_regs + 0x60ba, 0xff);
out_be16(fb_regs + 0x60b2, _red);
out_be16(fb_regs + 0x60b4, _green);
out_be16(fb_regs + 0x60b6, _blue);
out_be16(fb_regs + 0x60b8, ~_regno);
out_be16(fb_regs + 0x60f0, 0xff);
udelay(100);
while (in_be16(fb_regs + 0x6002) & 0x4) udelay(1);
out_be16(fb_regs + 0x60b2, 0);
out_be16(fb_regs + 0x60b4, 0);
out_be16(fb_regs + 0x60b6, 0);
out_be16(fb_regs + 0x60b8, 0);
return 0;
}
/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
static int hpfb_blank(int blank, struct fb_info *info)
{
out_8(fb_regs + TC_NBLANK, (blank ? 0x00 : fb_bitmask));
return 0;
}
static void topcat_blit(int x0, int y0, int x1, int y1, int w, int h, int rr)
{
if (rr >= 0) {
while (in_8(fb_regs + BUSY) & fb_bitmask)
;
}
out_8(fb_regs + TC_FBEN, fb_bitmask);
if (rr >= 0) {
out_8(fb_regs + TC_WEN, fb_bitmask);
out_8(fb_regs + WMRR, rr);
}
out_be16(fb_regs + SOURCE_X, x0);
out_be16(fb_regs + SOURCE_Y, y0);
out_be16(fb_regs + DEST_X, x1);
out_be16(fb_regs + DEST_Y, y1);
out_be16(fb_regs + WWIDTH, w);
out_be16(fb_regs + WHEIGHT, h);
out_8(fb_regs + WMOVE, fb_bitmask);
}
static void hpfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
topcat_blit(area->sx, area->sy, area->dx, area->dy, area->width, area->height, RR_COPY);
}
static void hpfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
{
u8 clr;
clr = region->color & 0xff;
while (in_8(fb_regs + BUSY) & fb_bitmask)
;
/* Foreground */
out_8(fb_regs + TC_WEN, fb_bitmask & clr);
out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_SET : RR_INVERT));
/* Background */
out_8(fb_regs + TC_WEN, fb_bitmask & ~clr);
out_8(fb_regs + WMRR, (region->rop == ROP_COPY ? RR_CLEAR : RR_NOOP));
topcat_blit(region->dx, region->dy, region->dx, region->dy, region->width, region->height, -1);
}
static int hpfb_sync(struct fb_info *info)
{
/*
* Since we also access the framebuffer directly, we have to wait
* until the block mover is finished
*/
while (in_8(fb_regs + BUSY) & fb_bitmask)
;
out_8(fb_regs + TC_WEN, fb_bitmask);
out_8(fb_regs + TC_PRR, RR_COPY);
out_8(fb_regs + TC_FBEN, fb_bitmask);
return 0;
}
static struct fb_ops hpfb_ops = {
.owner = THIS_MODULE,
.fb_setcolreg = hpfb_setcolreg,
.fb_blank = hpfb_blank,
.fb_fillrect = hpfb_fillrect,
.fb_copyarea = hpfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_sync = hpfb_sync,
};
/* Common to all HP framebuffers */
#define HPFB_FBWMSB 0x05 /* Frame buffer width */
#define HPFB_FBWLSB 0x07
#define HPFB_FBHMSB 0x09 /* Frame buffer height */
#define HPFB_FBHLSB 0x0b
#define HPFB_DWMSB 0x0d /* Display width */
#define HPFB_DWLSB 0x0f
#define HPFB_DHMSB 0x11 /* Display height */
#define HPFB_DHLSB 0x13
#define HPFB_NUMPLANES 0x5b /* Number of colour planes */
#define HPFB_FBOMSB 0x5d /* Frame buffer offset */
#define HPFB_FBOLSB 0x5f
static int hpfb_init_one(unsigned long phys_base, unsigned long virt_base)
{
unsigned long fboff, fb_width, fb_height, fb_start;
int ret;
fb_regs = virt_base;
fboff = (in_8(fb_regs + HPFB_FBOMSB) << 8) | in_8(fb_regs + HPFB_FBOLSB);
fb_info.fix.smem_start = (in_8(fb_regs + fboff) << 16);
if (phys_base >= DIOII_BASE) {
fb_info.fix.smem_start += phys_base;
}
if (DIO_SECID(fb_regs) != DIO_ID2_TOPCAT) {
/* This is the magic incantation the HP X server uses to make Catseye boards work. */
while (in_be16(fb_regs+0x4800) & 1)
;
out_be16(fb_regs+0x4800, 0); /* Catseye status */
out_be16(fb_regs+0x4510, 0); /* VB */
out_be16(fb_regs+0x4512, 0); /* TCNTRL */
out_be16(fb_regs+0x4514, 0); /* ACNTRL */
out_be16(fb_regs+0x4516, 0); /* PNCNTRL */
out_be16(fb_regs+0x4206, 0x90); /* RUG Command/Status */
out_be16(fb_regs+0x60a2, 0); /* Overlay Mask */
out_be16(fb_regs+0x60bc, 0); /* Ram Select */
}
/*
* Fill in the available video resolution
*/
fb_width = (in_8(fb_regs + HPFB_FBWMSB) << 8) | in_8(fb_regs + HPFB_FBWLSB);
fb_info.fix.line_length = fb_width;
fb_height = (in_8(fb_regs + HPFB_FBHMSB) << 8) | in_8(fb_regs + HPFB_FBHLSB);
fb_info.fix.smem_len = fb_width * fb_height;
fb_start = (unsigned long)ioremap_writethrough(fb_info.fix.smem_start,
fb_info.fix.smem_len);
hpfb_defined.xres = (in_8(fb_regs + HPFB_DWMSB) << 8) | in_8(fb_regs + HPFB_DWLSB);
hpfb_defined.yres = (in_8(fb_regs + HPFB_DHMSB) << 8) | in_8(fb_regs + HPFB_DHLSB);
hpfb_defined.xres_virtual = hpfb_defined.xres;
hpfb_defined.yres_virtual = hpfb_defined.yres;
hpfb_defined.bits_per_pixel = in_8(fb_regs + HPFB_NUMPLANES);
printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n",
fb_info.fix.smem_start, fb_start, fb_info.fix.smem_len/1024);
printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n",
hpfb_defined.xres, hpfb_defined.yres, hpfb_defined.bits_per_pixel, fb_info.fix.line_length);
/*
* Give the hardware a bit of a prod and work out how many bits per
* pixel are supported.
*/
out_8(fb_regs + TC_WEN, 0xff);
out_8(fb_regs + TC_PRR, RR_COPY);
out_8(fb_regs + TC_FBEN, 0xff);
out_8(fb_start, 0xff);
fb_bitmask = in_8(fb_start);
out_8(fb_start, 0);
/*
* Enable reading/writing of all the planes.
*/
out_8(fb_regs + TC_WEN, fb_bitmask);
out_8(fb_regs + TC_PRR, RR_COPY);
out_8(fb_regs + TC_REN, fb_bitmask);
out_8(fb_regs + TC_FBEN, fb_bitmask);
/*
* Clear the screen.
*/
topcat_blit(0, 0, 0, 0, fb_width, fb_height, RR_CLEAR);
/*
* Let there be consoles..
*/
if (DIO_SECID(fb_regs) == DIO_ID2_TOPCAT)
strcat(fb_info.fix.id, "Topcat");
else
strcat(fb_info.fix.id, "Catseye");
fb_info.fbops = &hpfb_ops;
fb_info.flags = FBINFO_DEFAULT;
fb_info.var = hpfb_defined;
fb_info.screen_base = (char *)fb_start;
ret = fb_alloc_cmap(&fb_info.cmap, 1 << hpfb_defined.bits_per_pixel, 0);
if (ret < 0)
goto unmap_screen_base;
ret = register_framebuffer(&fb_info);
if (ret < 0)
goto dealloc_cmap;
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fb_info.node, fb_info.fix.id);
return 0;
dealloc_cmap:
fb_dealloc_cmap(&fb_info.cmap);
unmap_screen_base:
if (fb_info.screen_base) {
iounmap(fb_info.screen_base);
fb_info.screen_base = NULL;
}
return ret;
}
/*
* Check that the secondary ID indicates that we have some hope of working with this
* framebuffer. The catseye boards are pretty much like topcats and we can muddle through.
*/
#define topcat_sid_ok(x) (((x) == DIO_ID2_LRCATSEYE) || ((x) == DIO_ID2_HRCCATSEYE) \
|| ((x) == DIO_ID2_HRMCATSEYE) || ((x) == DIO_ID2_TOPCAT))
/*
* Initialise the framebuffer
*/
static int hpfb_dio_probe(struct dio_dev *d, const struct dio_device_id *ent)
{
unsigned long paddr, vaddr;
paddr = d->resource.start;
if (!request_mem_region(d->resource.start, resource_size(&d->resource), d->name))
return -EBUSY;
if (d->scode >= DIOII_SCBASE) {
vaddr = (unsigned long)ioremap(paddr, resource_size(&d->resource));
} else {
vaddr = paddr + DIO_VIRADDRBASE;
}
printk(KERN_INFO "Topcat found at DIO select code %d "
"(secondary id %02x)\n", d->scode, (d->id >> 8) & 0xff);
if (hpfb_init_one(paddr, vaddr)) {
if (d->scode >= DIOII_SCBASE)
iounmap((void *)vaddr);
return -ENOMEM;
}
return 0;
}
static void hpfb_remove_one(struct dio_dev *d)
{
unregister_framebuffer(&fb_info);
if (d->scode >= DIOII_SCBASE)
iounmap((void *)fb_regs);
release_mem_region(d->resource.start, resource_size(&d->resource));
fb_dealloc_cmap(&fb_info.cmap);
if (fb_info.screen_base)
iounmap(fb_info.screen_base);
}
static struct dio_device_id hpfb_dio_tbl[] = {
{ DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_LRCATSEYE) },
{ DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRCCATSEYE) },
{ DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_HRMCATSEYE) },
{ DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_TOPCAT) },
{ 0 }
};
static struct dio_driver hpfb_driver = {
.name = "hpfb",
.id_table = hpfb_dio_tbl,
.probe = hpfb_dio_probe,
.remove = hpfb_remove_one,
};
int __init hpfb_init(void)
{
unsigned int sid;
mm_segment_t fs;
unsigned char i;
int err;
/* Topcats can be on the internal IO bus or real DIO devices.
* The internal variant sits at 0x560000; it has primary
* and secondary ID registers just like the DIO version.
* So we merge the two detection routines.
*
* Perhaps this #define should be in a global header file:
* I believe it's common to all internal fbs, not just topcat.
*/
#define INTFBVADDR 0xf0560000
#define INTFBPADDR 0x560000
if (!MACH_IS_HP300)
return -ENODEV;
if (fb_get_options("hpfb", NULL))
return -ENODEV;
err = dio_register_driver(&hpfb_driver);
if (err)
return err;
fs = get_fs();
set_fs(KERNEL_DS);
err = get_user(i, (unsigned char *)INTFBVADDR + DIO_IDOFF);
set_fs(fs);
if (!err && (i == DIO_ID_FBUFFER) && topcat_sid_ok(sid = DIO_SECID(INTFBVADDR))) {
if (!request_mem_region(INTFBPADDR, DIO_DEVSIZE, "Internal Topcat"))
return -EBUSY;
printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid);
if (hpfb_init_one(INTFBPADDR, INTFBVADDR)) {
return -ENOMEM;
}
}
return 0;
}
void __exit hpfb_cleanup_module(void)
{
dio_unregister_driver(&hpfb_driver);
}
module_init(hpfb_init);
module_exit(hpfb_cleanup_module);
MODULE_LICENSE("GPL");