swh:1:snp:173f8deb0c56c557784b4fd217e7608ac6197844
Tip revision: e22ce8eb631bdc47a4a4ea7ecf4e4ba499db4f93 authored by Linus Torvalds on 22 August 2021, 21:24:56 UTC
Linux 5.14-rc7
Linux 5.14-rc7
Tip revision: e22ce8e
tag_mtk.c
// SPDX-License-Identifier: GPL-2.0
/*
* Mediatek DSA Tag support
* Copyright (C) 2017 Landen Chao <landen.chao@mediatek.com>
* Sean Wang <sean.wang@mediatek.com>
*/
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include "dsa_priv.h"
#define MTK_HDR_LEN 4
#define MTK_HDR_XMIT_UNTAGGED 0
#define MTK_HDR_XMIT_TAGGED_TPID_8100 1
#define MTK_HDR_XMIT_TAGGED_TPID_88A8 2
#define MTK_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0)
#define MTK_HDR_XMIT_DP_BIT_MASK GENMASK(5, 0)
#define MTK_HDR_XMIT_SA_DIS BIT(6)
static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct dsa_port *dp = dsa_slave_to_port(dev);
u8 xmit_tpid;
u8 *mtk_tag;
/* Build the special tag after the MAC Source Address. If VLAN header
* is present, it's required that VLAN header and special tag is
* being combined. Only in this way we can allow the switch can parse
* the both special and VLAN tag at the same time and then look up VLAN
* table with VID.
*/
switch (skb->protocol) {
case htons(ETH_P_8021Q):
xmit_tpid = MTK_HDR_XMIT_TAGGED_TPID_8100;
break;
case htons(ETH_P_8021AD):
xmit_tpid = MTK_HDR_XMIT_TAGGED_TPID_88A8;
break;
default:
xmit_tpid = MTK_HDR_XMIT_UNTAGGED;
skb_push(skb, MTK_HDR_LEN);
memmove(skb->data, skb->data + MTK_HDR_LEN, 2 * ETH_ALEN);
}
mtk_tag = skb->data + 2 * ETH_ALEN;
/* Mark tag attribute on special tag insertion to notify hardware
* whether that's a combined special tag with 802.1Q header.
*/
mtk_tag[0] = xmit_tpid;
mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
/* Tag control information is kept for 802.1Q */
if (xmit_tpid == MTK_HDR_XMIT_UNTAGGED) {
mtk_tag[2] = 0;
mtk_tag[3] = 0;
}
return skb;
}
static struct sk_buff *mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt)
{
u16 hdr;
int port;
__be16 *phdr;
if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
return NULL;
/* The MTK header is added by the switch between src addr
* and ethertype at this point, skb->data points to 2 bytes
* after src addr so header should be 2 bytes right before.
*/
phdr = (__be16 *)(skb->data - 2);
hdr = ntohs(*phdr);
/* Remove MTK tag and recalculate checksum. */
skb_pull_rcsum(skb, MTK_HDR_LEN);
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - MTK_HDR_LEN,
2 * ETH_ALEN);
/* Get source port information */
port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
skb->dev = dsa_master_find_slave(dev, 0, port);
if (!skb->dev)
return NULL;
skb->offload_fwd_mark = 1;
return skb;
}
static const struct dsa_device_ops mtk_netdev_ops = {
.name = "mtk",
.proto = DSA_TAG_PROTO_MTK,
.xmit = mtk_tag_xmit,
.rcv = mtk_tag_rcv,
.needed_headroom = MTK_HDR_LEN,
};
MODULE_LICENSE("GPL");
MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_MTK);
module_dsa_tag_driver(mtk_netdev_ops);