swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 59a3759d0fe8d969888c741bb33f4946e4d3750d authored by Linus Torvalds on 23 May 2009, 21:47:00 UTC
Linux 2.6.30-rc7
Linux 2.6.30-rc7
Tip revision: 59a3759
cats-hw.c
/*
* linux/arch/arm/mach-footbridge/cats-hw.c
*
* CATS machine fixup
*
* Copyright (C) 1998, 1999 Russell King, Phil Blundell
*/
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/screen_info.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include "common.h"
#define CFG_PORT 0x370
#define INDEX_PORT (CFG_PORT)
#define DATA_PORT (CFG_PORT + 1)
static int __init cats_hw_init(void)
{
if (machine_is_cats()) {
/* Set Aladdin to CONFIGURE mode */
outb(0x51, CFG_PORT);
outb(0x23, CFG_PORT);
/* Select logical device 3 */
outb(0x07, INDEX_PORT);
outb(0x03, DATA_PORT);
/* Set parallel port to DMA channel 3, ECP+EPP1.9,
enable EPP timeout */
outb(0x74, INDEX_PORT);
outb(0x03, DATA_PORT);
outb(0xf0, INDEX_PORT);
outb(0x0f, DATA_PORT);
outb(0xf1, INDEX_PORT);
outb(0x07, DATA_PORT);
/* Select logical device 4 */
outb(0x07, INDEX_PORT);
outb(0x04, DATA_PORT);
/* UART1 high speed mode */
outb(0xf0, INDEX_PORT);
outb(0x02, DATA_PORT);
/* Select logical device 5 */
outb(0x07, INDEX_PORT);
outb(0x05, DATA_PORT);
/* UART2 high speed mode */
outb(0xf0, INDEX_PORT);
outb(0x02, DATA_PORT);
/* Set Aladdin to RUN mode */
outb(0xbb, CFG_PORT);
}
return 0;
}
__initcall(cats_hw_init);
/*
* CATS uses soft-reboot by default, since
* hard reboots fail on early boards.
*/
static void __init
fixup_cats(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
screen_info.orig_video_lines = 25;
screen_info.orig_video_points = 16;
screen_info.orig_y = 24;
}
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0xfe000000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
MACHINE_END