swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 0ecfebd2b52404ae0c54a878c872bb93363ada36 authored by Linus Torvalds on 07 July 2019, 22:41:56 UTC
Linux 5.2
Linux 5.2
Tip revision: 0ecfebd
ehci-imx35.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_OTG_PP_BIT (1 << 11)
#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
#define MX35_H1_OCPOL_BIT (1 << 2)
int mx35_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}