swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 44549e8f5eea4e0a41b487b63e616cb089922b99 authored by Linus Torvalds on 08 May 2016, 21:38:32 UTC
Linux 4.6-rc7
Linux 4.6-rc7
Tip revision: 44549e8
pm.c
/*
* pm.c - Common OMAP2+ power management-related code
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/pm_opp.h>
#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/cpu.h>
#include <asm/system_misc.h>
#include "omap-pm.h"
#include "omap_device.h"
#include "common.h"
#include "soc.h"
#include "prcm-common.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
#include "twl-common.h"
#ifdef CONFIG_SUSPEND
/*
* omap_pm_suspend: points to a function that does the SoC-specific
* suspend work
*/
static int (*omap_pm_suspend)(void);
#endif
#ifdef CONFIG_PM
/**
* struct omap2_oscillator - Describe the board main oscillator latencies
* @startup_time: oscillator startup latency
* @shutdown_time: oscillator shutdown latency
*/
struct omap2_oscillator {
u32 startup_time;
u32 shutdown_time;
};
static struct omap2_oscillator oscillator = {
.startup_time = ULONG_MAX,
.shutdown_time = ULONG_MAX,
};
void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
{
oscillator.startup_time = tstart;
oscillator.shutdown_time = tshut;
}
void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
{
if (!tstart || !tshut)
return;
*tstart = oscillator.startup_time;
*tshut = oscillator.shutdown_time;
}
#endif
static int __init _init_omap_device(char *name)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
pdev = omap_device_build(oh->name, 0, oh, NULL, 0);
if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
return 0;
}
/*
* Build omap_devices for processors and bus.
*/
static void __init omap2_init_processor_devices(void)
{
_init_omap_device("mpu");
if (omap3_has_iva())
_init_omap_device("iva");
if (cpu_is_omap44xx()) {
_init_omap_device("l3_main_1");
_init_omap_device("dsp");
_init_omap_device("iva");
} else {
_init_omap_device("l3_main");
}
}
int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
{
/* XXX The usecount test is racy */
if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
!(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
clkdm->usecount == 0)
clkdm_sleep(clkdm);
return 0;
}
/*
* This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
* opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct dev_pm_opp *opp;
unsigned long freq, bootup_volt;
struct device *dev;
if (!vdd_name || !clk_name || !oh_name) {
pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
if (!strncmp(oh_name, "mpu", 3))
/*
* All current OMAPs share voltage rail and clock
* source, so CPU0 is used to represent the MPU-SS.
*/
dev = get_cpu_device(0);
else
dev = omap_device_get_by_hwmod_name(oh_name);
if (IS_ERR(dev)) {
pr_err("%s: Unable to get dev pointer for hwmod %s\n",
__func__, oh_name);
goto exit;
}
voltdm = voltdm_lookup(vdd_name);
if (!voltdm) {
pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
freq = clk_get_rate(clk);
clk_put(clk);
rcu_read_lock();
opp = dev_pm_opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
#ifdef CONFIG_SUSPEND
static int omap_pm_enter(suspend_state_t suspend_state)
{
int ret = 0;
if (!omap_pm_suspend)
return -ENOENT; /* XXX doublecheck */
switch (suspend_state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap_pm_suspend();
break;
default:
ret = -EINVAL;
}
return ret;
}
static int omap_pm_begin(suspend_state_t state)
{
cpu_idle_poll_ctrl(true);
if (cpu_is_omap34xx())
omap_prcm_irq_prepare();
return 0;
}
static void omap_pm_end(void)
{
cpu_idle_poll_ctrl(false);
}
static void omap_pm_finish(void)
{
if (cpu_is_omap34xx())
omap_prcm_irq_complete();
}
static const struct platform_suspend_ops omap_pm_ops = {
.begin = omap_pm_begin,
.end = omap_pm_end,
.enter = omap_pm_enter,
.finish = omap_pm_finish,
.valid = suspend_valid_only_mem,
};
/**
* omap_common_suspend_init - Set common suspend routines for OMAP SoCs
* @pm_suspend: function pointer to SoC specific suspend function
*/
void omap_common_suspend_init(void *pm_suspend)
{
omap_pm_suspend = pm_suspend;
suspend_set_ops(&omap_pm_ops);
}
#endif /* CONFIG_SUSPEND */
static void __init omap3_init_voltages(void)
{
if (!cpu_is_omap34xx())
return;
omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
{
if (!cpu_is_omap44xx())
return;
omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static inline void omap_init_cpufreq(void)
{
struct platform_device_info devinfo = { };
if (!of_have_populated_dt())
devinfo.name = "omap-cpufreq";
else
devinfo.name = "cpufreq-dt";
platform_device_register_full(&devinfo);
}
static int __init omap2_common_pm_init(void)
{
if (!of_have_populated_dt())
omap2_init_processor_devices();
omap_pm_if_init();
return 0;
}
omap_postcore_initcall(omap2_common_pm_init);
int __init omap2_common_pm_late_init(void)
{
if (of_have_populated_dt()) {
omap3_twl_init();
omap4_twl_init();
}
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */
omap3_init_voltages();
omap4_init_voltages();
/* Smartreflex device init */
omap_devinit_smartreflex();
/* cpufreq dummy device instantiation */
omap_init_cpufreq();
return 0;
}