swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: d012a7190fc1fd72ed48911e77ca97ba4521bccd authored by Linus Torvalds on 23 August 2020, 21:08:43 UTC
Linux 5.9-rc2
Linux 5.9-rc2
Tip revision: d012a71
pm44xx.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* OMAP4+ Power Management Routines
*
* Copyright (C) 2010-2013 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*/
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <asm/system_misc.h>
#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
#include "pm.h"
u16 pm44xx_errata;
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
u32 next_logic_state;
#ifdef CONFIG_SUSPEND
u32 saved_state;
u32 saved_logic_state;
#endif
struct list_head node;
};
/**
* struct static_dep_map - Static dependency map
* @from: from clockdomain
* @to: to clockdomain
*/
struct static_dep_map {
const char *from;
const char *to;
};
static u32 cpu_suspend_state = PWRDM_POWER_OFF;
static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
static int omap4_pm_suspend(void)
{
struct power_state *pwrst;
int state, ret = 0;
u32 cpu_id = smp_processor_id();
/* Save current powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
}
/* Set targeted power domain states by suspend */
list_for_each_entry(pwrst, &pwrst_list, node) {
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state);
}
/*
* For MPUSS to hit power domain retention(CSWR or OSWR),
* CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
* since CPU power domain CSWR is not supported by hardware
* Only master CPU follows suspend path. All other CPUs follow
* CPU hotplug path in system wide suspend. On OMAP4, CPU power
* domain CSWR is not supported by hardware.
* More details can be found in OMAP4430 TRM section 4.3.4.2.
*/
omap4_enter_lowpower(cpu_id, cpu_suspend_state);
/* Restore next powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
pr_info("Powerdomain (%s) didn't enter target state %d\n",
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
}
if (ret) {
pr_crit("Could not enter target state in pm_suspend\n");
/*
* OMAP4 chip PM currently works only with certain (newer)
* versions of bootloaders. This is due to missing code in the
* kernel to properly reset and initialize some devices.
* Warn the user about the bootloader version being one of the
* possible causes.
* http://www.spinics.net/lists/arm-kernel/msg218641.html
*/
pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
} else {
pr_info("Successfully put all powerdomains to target state\n");
}
return 0;
}
#else
#define omap4_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
struct power_state *pwrst;
if (!pwrdm->pwrsts)
return 0;
/*
* Skip CPU0 and CPU1 power domains. CPU1 is programmed
* through hotplug path and CPU0 explicitly programmed
* further down in the code path
*/
if (!strncmp(pwrdm->name, "cpu", 3)) {
if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
cpu_suspend_state = PWRDM_POWER_RET;
return 0;
}
if (!strncmp(pwrdm->name, "core", 4) ||
!strncmp(pwrdm->name, "l4per", 5))
pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF);
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false,
PWRDM_POWER_RET);
pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true,
PWRDM_POWER_OFF);
list_add(&pwrst->node, &pwrst_list);
return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
/**
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
* with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and
* by secondary CPU with CONFIG_CPU_IDLE.
*/
static void omap_default_idle(void)
{
omap_do_wfi();
}
/*
* The dynamic dependency between MPUSS -> MEMIF and
* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
* expected. The hardware recommendation is to enable static
* dependencies for these to avoid system lock ups or random crashes.
* The L4 wakeup depedency is added to workaround the OCP sync hardware
* BUG with 32K synctimer which lead to incorrect timer value read
* from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
* are part of L4 wakeup clockdomain.
*/
static const struct static_dep_map omap4_static_dep_map[] = {
{.from = "mpuss_clkdm", .to = "l3_emif_clkdm"},
{.from = "mpuss_clkdm", .to = "l3_1_clkdm"},
{.from = "mpuss_clkdm", .to = "l3_2_clkdm"},
{.from = "ducati_clkdm", .to = "l3_1_clkdm"},
{.from = "ducati_clkdm", .to = "l3_2_clkdm"},
{.from = NULL} /* TERMINATION */
};
static const struct static_dep_map omap5_dra7_static_dep_map[] = {
{.from = "mpu_clkdm", .to = "emif_clkdm"},
{.from = NULL} /* TERMINATION */
};
/**
* omap4plus_init_static_deps() - Initialize a static dependency map
* @map: Mapping of clock domains
*/
static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
{
int ret;
struct clockdomain *from, *to;
if (!map)
return 0;
while (map->from) {
from = clkdm_lookup(map->from);
to = clkdm_lookup(map->to);
if (!from || !to) {
pr_err("Failed lookup %s or %s for wakeup dependency\n",
map->from, map->to);
return -EINVAL;
}
ret = clkdm_add_wkdep(from, to);
if (ret) {
pr_err("Failed to add %s -> %s wakeup dependency(%d)\n",
map->from, map->to, ret);
return ret;
}
map++;
}
return 0;
}
/**
* omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices
*
* Initializes basic stuff for power management functionality.
*/
int __init omap4_pm_init_early(void)
{
if (cpu_is_omap446x())
pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
if (soc_is_omap54xx() || soc_is_dra7xx())
pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE;
return 0;
}
/**
* omap4_pm_init - Init routine for OMAP4+ devices
*
* Initializes all powerdomain and clockdomain target states
* and all PRCM settings.
* Return: Returns the error code returned by called functions.
*/
int __init omap4_pm_init(void)
{
int ret = 0;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
}
pr_info("Power Management for TI OMAP4+ devices.\n");
/*
* OMAP4 chip PM currently works only with certain (newer)
* versions of bootloaders. This is due to missing code in the
* kernel to properly reset and initialize some devices.
* http://www.spinics.net/lists/arm-kernel/msg218641.html
*/
if (cpu_is_omap44xx())
pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains.\n");
goto err2;
}
if (cpu_is_omap44xx())
ret = omap4plus_init_static_deps(omap4_static_dep_map);
else if (soc_is_omap54xx() || soc_is_dra7xx())
ret = omap4plus_init_static_deps(omap5_dra7_static_dep_map);
if (ret) {
pr_err("Failed to initialise static dependencies.\n");
goto err2;
}
ret = omap4_mpuss_init();
if (ret) {
pr_err("Failed to initialise OMAP4 MPUSS\n");
goto err2;
}
(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
omap_common_suspend_init(omap4_pm_suspend);
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;
if (cpu_is_omap44xx() || soc_is_omap54xx())
omap4_idle_init();
err2:
return ret;
}