swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 56299378726d5f2ba8d3c8cbbd13cb280ba45e4f authored by Linus Torvalds on 21 June 2011, 03:25:46 UTC
Linux 3.0-rc4
Linux 3.0-rc4
Tip revision: 5629937
voltage.h
/*
* OMAP Voltage Management Routines
*
* Author: Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2009 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
#include <linux/err.h>
#include "vc.h"
#include "vp.h"
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
/*
* OMAP3 GENERIC setup times. Revisit to see if these needs to be
* passed from board or PMIC file
*/
#define OMAP3_CLKSETUP 0xff
#define OMAP3_VOLTOFFSET 0xff
#define OMAP3_VOLTSETUP2 0xff
/**
* struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
* @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
* XXX It is not necessary to have both a _mask and a _shift for the same
* bitfield - remove one!
*/
struct omap_vfsm_instance_data {
u32 voltsetup_mask;
u8 voltsetup_reg;
u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
* @name: Name of the voltage domain which can be used as a unique
* identifier.
*/
struct voltagedomain {
char *name;
};
/**
* struct omap_volt_data - Omap voltage specific data.
* @voltage_nominal: The possible voltage value in uV
* @sr_efuse_offs: The offset of the efuse register(from system
* control module base address) from where to read
* the n-target value for the smartreflex module.
* @sr_errminlimit: Error min limit value for smartreflex. This value
* differs at differnet opp and thus is linked
* with voltage.
* @vp_errorgain: Error gain value for the voltage processor. This
* field also differs according to the voltage/opp.
*/
struct omap_volt_data {
u32 volt_nominal;
u32 sr_efuse_offs;
u8 sr_errminlimit;
u8 vp_errgain;
};
/**
* struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
struct omap_volt_pmic_info {
int slew_rate;
int step_size;
u32 on_volt;
u32 onlp_volt;
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
u8 i2c_slave_addr;
u8 pmic_reg;
unsigned long (*vsel_to_uv) (const u8 vsel);
u8 (*uv_to_vsel) (unsigned long uV);
};
/**
* omap_vdd_info - Per Voltage Domain info
*
* @volt_data : voltage table having the distinct voltages supported
* by the domain and other associated per voltage data.
* @pmic_info : pmic specific parameters which should be populted by
* the pmic drivers.
* @vp_data : the register values, shifts, masks for various
* vp registers
* @vp_rt_data : VP data derived at runtime, not predefined
* @vc_data : structure containing various various vc registers,
* shifts, masks etc.
* @vfsm : voltage manager FSM data
* @voltdm : pointer to the voltage domain structure
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
* @vp_enabled : flag to keep track of whether vp is enabled or not
* @volt_scale : API to scale the voltage of the vdd.
*/
struct omap_vdd_info {
struct omap_volt_data *volt_data;
struct omap_volt_pmic_info *pmic_info;
struct omap_vp_instance_data *vp_data;
struct omap_vp_runtime_data vp_rt_data;
struct omap_vc_instance_data *vc_data;
const struct omap_vfsm_instance_data *vfsm;
struct voltagedomain voltdm;
struct dentry *debug_dir;
u32 curr_volt;
bool vp_enabled;
u32 (*read_reg) (u16 mod, u8 offset);
void (*write_reg) (u32 val, u16 mod, u8 offset);
int (*volt_scale) (struct omap_vdd_info *vdd,
unsigned long target_volt);
};
unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
void omap_vp_enable(struct voltagedomain *voltdm);
void omap_vp_disable(struct voltagedomain *voltdm);
int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
unsigned long target_volt);
void omap_voltage_reset(struct voltagedomain *voltdm);
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
/* API to get the voltagedomain pointer */
struct voltagedomain *omap_voltage_domain_lookup(char *name);
int omap_voltage_late_init(void);
#else
static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info)
{
return -EINVAL;
}
static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method) {}
static inline int omap_voltage_late_init(void)
{
return -EINVAL;
}
static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
{
return ERR_PTR(-EINVAL);
}
#endif
#endif