swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 61c4f2c81c61f73549928dfd9f3e8f26aa36a8cf authored by Linus Torvalds on 19 May 2011, 04:06:34 UTC
Linux 2.6.39
Linux 2.6.39
Tip revision: 61c4f2c
Kconfig
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
config CPU_S3C2440
bool
select CPU_ARM920T
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2410_GPIO
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
help
Support for S3C2440 Samsung Mobile CPU based systems.
config CPU_S3C2442
bool
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
help
Support for S3C2442 Samsung Mobile CPU based systems.
config CPU_S3C244X
bool
depends on CPU_S3C2440 || CPU_S3C2442
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
select S3C2410_CPUFREQ_UTILS
default y
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
config S3C2440_XTAL_12000000
bool
help
Indicate that the build needs to support 12MHz system
crystal.
config S3C2440_XTAL_16934400
bool
help
Indicate that the build needs to support 16.9344MHz system
crystal.
config S3C2440_PLL_12000000
bool
depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
default y if CPU_FREQ_S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
config S3C2440_PLL_16934400
bool
depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
default y if CPU_FREQ_S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
config S3C2440_DMA
bool
depends on CPU_S3C2440
help
Support for S3C2440 specific DMA code5A
menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select CPU_S3C2442
select MFD_PCF50633
select PCF50633_GPIO
select I2C
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
select TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
The DVS driver alters the voltage supplied to the ARM core
depending on the frequency it is running at. The driver itself
does not do any of the frequency alteration, which is left up
to the cpufreq driver.
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
select S3C2440_XTAL_16934400
select PM_H1940 if PM
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the SMDK2440.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
select CPU_S3C2442
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
config MACH_RX1950
bool "HP iPAQ rx1950"
select CPU_S3C2442
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
select S3C2410_PWM
select S3C_DEV_NAND
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
help
Say Y here if you're using HP iPAQ rx1950
endmenu