swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 6ee1d745b7c9fd573fba142a2efdad76a9f1cb04 authored by Linus Torvalds on 25 January 2021, 00:47:14 UTC
Linux 5.11-rc5
Linux 5.11-rc5
Tip revision: 6ee1d74
spear320.c
/*
* arch/arm/mach-spear3xx/spear320.c
*
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr320: " fmt
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "generic.h"
#include <mach/spear.h>
#define SPEAR320_UART1_BASE UL(0xA3000000)
#define SPEAR320_UART2_BASE UL(0xA4000000)
#define SPEAR320_SSP0_BASE UL(0xA5000000)
#define SPEAR320_SSP1_BASE UL(0xA6000000)
/* DMAC platform data's slave info */
struct pl08x_channel_data spear320_dma_info[] = {
{
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c0_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "ssp2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart1_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "uart2_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c1_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2c2_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "i2s_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB2,
}, {
.bus_id = "rs485_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB2,
},
};
static struct pl022_ssp_controller spear320_ssp_data[] = {
{
.bus_id = 1,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp1_tx",
.dma_rx_param = "ssp1_rx",
.num_chipselect = 2,
}, {
.bus_id = 2,
.enable_dma = 1,
.dma_filter = pl08x_filter_id,
.dma_tx_param = "ssp2_tx",
.dma_rx_param = "ssp2_rx",
.num_chipselect = 2,
}
};
static struct amba_pl011_data spear320_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
},
};
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
&spear320_ssp_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
&spear320_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
&spear320_uart_data[1]),
{}
};
static void __init spear320_dt_init(void)
{
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL);
}
static const char * const spear320_dt_board_compat[] = {
"st,spear320",
"st,spear320-evb",
"st,spear320-hmi",
NULL,
};
struct map_desc spear320_io_desc[] __initdata = {
{
.virtual = (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE,
.pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
};
static void __init spear320_map_io(void)
{
iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
spear3xx_map_io();
}
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
.map_io = spear320_map_io,
.init_time = spear3xx_timer_init,
.init_machine = spear320_dt_init,
.restart = spear_restart,
.dt_compat = spear320_dt_board_compat,
MACHINE_END