swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: a38d6181ff27824c79fc7df825164a212eff6a3f authored by Linus Torvalds on 01 July 2007, 19:54:24 UTC
Linux 2.6.22-rc7
Linux 2.6.22-rc7
Tip revision: a38d618
Kconfig
# $Id: config.in,v 1.158 2002/01/24 22:14:44 davem Exp $
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu "Linux/UltraSPARC Kernel Configuration"
config SPARC
bool
default y
config SPARC64
bool
default y
help
SPARC is a family of RISC microprocessors designed and marketed by
Sun Microsystems, incorporated. This port covers the newer 64-bit
UltraSPARC. The UltraLinux project maintains both the SPARC32 and
SPARC64 ports; its web page is available at
<http://www.ultralinux.org/>.
config GENERIC_TIME
bool
default y
config GENERIC_CLOCKEVENTS
bool
default y
config 64BIT
def_bool y
config MMU
bool
default y
config QUICKLIST
bool
default y
config STACKTRACE_SUPPORT
bool
default y
config LOCKDEP_SUPPORT
bool
default y
config ARCH_MAY_HAVE_PC_FDC
bool
default y
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config AUDIT_ARCH
bool
default y
choice
prompt "Kernel page size"
default SPARC64_PAGE_SIZE_8KB
config SPARC64_PAGE_SIZE_8KB
bool "8KB"
help
This lets you select the page size of the kernel.
8KB and 64KB work quite well, since Sparc ELF sections
provide for up to 64KB alignment.
Therefore, 512KB and 4MB are for expert hackers only.
If you don't know what to do, choose 8KB.
config SPARC64_PAGE_SIZE_64KB
bool "64KB"
config SPARC64_PAGE_SIZE_512KB
bool "512KB"
config SPARC64_PAGE_SIZE_4MB
bool "4MB"
endchoice
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via /proc/<pid>/seccomp, it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
If unsure, say Y. Only embedded should say N here.
source kernel/Kconfig.hz
source "init/Kconfig"
config SYSVIPC_COMPAT
bool
depends on COMPAT && SYSVIPC
default y
config GENERIC_HARDIRQS
bool
default y
menu "General machine setup"
source "kernel/time/Kconfig"
config SMP
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more than
one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
See also the <file:Documentation/smp.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-1024)"
range 2 1024
depends on SMP
default "64"
source "drivers/cpufreq/Kconfig"
config US3_FREQ
tristate "UltraSPARC-III CPU Frequency driver"
depends on CPU_FREQ
select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for UltraSPARC-III processors.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
config US2E_FREQ
tristate "UltraSPARC-IIe CPU Frequency driver"
depends on CPU_FREQ
select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for UltraSPARC-IIe processors.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
# Global things across all Sun machines.
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
bool
default y
config GENERIC_FIND_NEXT_BIT
bool
default y
config GENERIC_HWEIGHT
bool
default y if !ULTRA_HAS_POPULATION_COUNT
config GENERIC_CALIBRATE_DELAY
bool
default y
choice
prompt "SPARC64 Huge TLB Page Size"
depends on HUGETLB_PAGE
default HUGETLB_PAGE_SIZE_4MB
config HUGETLB_PAGE_SIZE_4MB
bool "4MB"
config HUGETLB_PAGE_SIZE_512K
depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
bool "512K"
config HUGETLB_PAGE_SIZE_64K
depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
bool "64K"
endchoice
endmenu
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_DEFAULT
def_bool y
select SPARSEMEM_STATIC
source "mm/Kconfig"
config ISA
bool
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config ISAPNP
bool
help
Say Y here if you would like support for ISA Plug and Play devices.
Some information is in <file:Documentation/isapnp.txt>.
To compile this driver as a module, choose M here: the
module will be called isapnp.
If unsure, say Y.
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config MCA
bool
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
config PCMCIA
tristate
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
actually two varieties of these cards: the older 16 bit PCMCIA cards
and the newer 32 bit CardBus cards. If you want to use CardBus
cards, you need to say Y here and also to "CardBus support" below.
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config SBUS
bool
default y
config SBUSCHAR
bool
default y
config SUN_AUXIO
bool
default y
config SUN_IO
bool
default y
config PCI
bool "PCI support"
select ARCH_SUPPORTS_MSI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
The PCI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, contains valuable
information about which PCI hardware does work under Linux and which
doesn't.
config PCI_DOMAINS
bool
default PCI
source "drivers/pci/Kconfig"
config SUN_OPENPROMFS
tristate "Openprom tree appears in /proc/openprom"
help
If you say Y, the OpenPROM device tree will be available as a
virtual file system, which you can mount to /proc/openprom by "mount
-t openpromfs none /proc/openprom".
To compile the /proc/openprom support as a module, choose M here: the
module will be called openpromfs. If unsure, choose M.
config SPARC32_COMPAT
bool "Kernel support for Linux/Sparc 32bit binary compatibility"
help
This allows you to run 32-bit binaries on your Ultra.
Everybody wants this; say Y.
config COMPAT
bool
depends on SPARC32_COMPAT
default y
config BINFMT_ELF32
bool "Kernel support for 32-bit ELF binaries"
depends on SPARC32_COMPAT
help
This allows you to run 32-bit Linux/ELF binaries on your Ultra.
Everybody wants this; say Y.
config BINFMT_AOUT32
bool "Kernel support for 32-bit (ie. SunOS) a.out binaries"
depends on SPARC32_COMPAT
help
This allows you to run 32-bit a.out format binaries on your Ultra.
If you want to run SunOS binaries (see SunOS binary emulation below)
or other a.out binaries, say Y. If unsure, say N.
menu "Executable file formats"
source "fs/Kconfig.binfmt"
config SUNOS_EMUL
bool "SunOS binary emulation"
depends on BINFMT_AOUT32
help
This allows you to run most SunOS binaries. If you want to do this,
say Y here and place appropriate files in /usr/gnemul/sunos. See
<http://www.ultralinux.org/faq.html> for more information. If you
want to run SunOS binaries on an Ultra you must also say Y to
"Kernel support for 32-bit a.out binaries" above.
config SOLARIS_EMUL
tristate "Solaris binary emulation (EXPERIMENTAL)"
depends on SPARC32_COMPAT && EXPERIMENTAL
help
This is experimental code which will enable you to run (many)
Solaris binaries on your SPARC Linux machine.
To compile this code as a module, choose M here: the
module will be called solaris.
endmenu
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on SMP
default y
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with UltraSPARC cpus at a cost of slightly increased
overhead in some places. If unsure say N here.
config SCHED_MC
bool "Multi-core scheduler support"
depends on SMP
default y
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
source "kernel/Kconfig.preempt"
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Initial kernel command string"
depends on CMDLINE_BOOL
default "console=ttyS0,9600 root=/dev/sda1"
help
Say Y here if you want to be able to pass default arguments to
the kernel. This will be overridden by the bootloader, if you
use one (such as SILO). This is most useful if you want to boot
a kernel from TFTP, and want default options to be available
with having them passed on the command line.
NOTE: This option WILL override the PROM bootargs setting!
source "net/Kconfig"
source "drivers/Kconfig"
source "drivers/sbus/char/Kconfig"
source "drivers/fc4/Kconfig"
source "fs/Kconfig"
menu "Instrumentation Support"
depends on EXPERIMENTAL
source "arch/sparc64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
endmenu
source "arch/sparc64/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"